Sharp Lc 46hd1e Operation Manual

Connecting external devices
Connecting HDMI device to TV
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can 
interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc device) 
using a single remote control.
NOTE
•  AQUOS LINK-compatible AQUOS BD Player, AQUOS Audio speaker system and AQUOS Recorder are to be on sale after the release of this TV. (As of July 2007)
What you can do with...

Connecting external devices
AQUOS LINK setup
E AQUOS LINK Auto power on
If this is activated, the One Touch Play function is 
enabled.
While the TV is in standby mode, it automatically turns 
on and plays back the image from the HDMI source.Press  MENU  and the TV menu screen displays.
Press  c/d  to select “Setup”, and then press 
OK .
Setup Εxtended functions Picture Sound
TV menu
AQUOS LINK setup
Stations
Child lock
Timer functions
Language
Miscellaneous
Press 
a/b  to select “AQUOS LINK setup”, and...

Connecting external devices
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
NOTE
•  The AQUOS LINK buttons such as B, REV  G , PLAY  
I , FWD  J , STOP  H  inside the flip cover should not be 
confused with the buttons used for HDD operation. See 
page 45.
Open the remote control’s flip cover.
Press  PLAY  I to start playback of a title.
•  This does not start playback of programmes stored 
in the DR archive.
•  See right column,...

Using AV Link function 
This TV incorporates four typical AV Link functions 
for smooth connections between the TV and other 
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns 
on and plays back the image from the audiovisual 
source (e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected 
audiovisual equipment (e.g. VCR, DVD) enters standby 
mode as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the...

Other features
Picture in Picture (PIP)Using the PIP menu
Here you can set the PIP type (split screen or small 
picture) and the position of the small picture.Press  PIP to activate the PIP screen.
Make sure the picture you want to operate is 
surrounded in a green frame.
Press  MENU  to display the PIP menu. Here you 
can change the PIP type (“Small PIP” or “Split 
screen” under “Type”) or the position of the 
small picture (under “Position”).
•  You can also move the small picture to a different...

Other features
Using PhotoViewer
This TV is equipped with PhotoViewer, allowing you to 
view pictures in the standard JPEG format via a USB 
stick or a memory card in a card reader. In addition you 
can arrange the pictures into a Slideshow.
E Connecting
Insert a card reader (with a USB cable) or a USB stick 
into the USB terminal on the TV (see page 6). Should 
you find it difficult to connect a USB cable due to the 
TV installation pattern (e.g., wall-mounting), use a USB 
extension cable...

Watching Slide show
Starting Slide show
 Press I to start/resume Slide show.
NOTE
•  If no pictures is selected for Slide show, all the pictures in  the memory device are played in Slide show. 
  While Slide show is in progress (or paused), you  can:
✔ Press  OK to display Photo Overview.
✔  Press  F to pause/resume Slide show.
✔  Press  YELLOW  to zoom in (only when Slide show 
is paused).
✔  Press  c/d  to rotate the image 90 degrees right/left 
(only when Slide show is paused).
✔  Press  J or Pr  to...

Other features
EPG (Electronic Programme Guide)
EPG stands for Electronic Programme Guide and 
provides you with on-screen programme details. With 
this system, as with a printed programme guide, you 
can learn about the current programme. In addition, 
programmes can be sorted according to certain topics, 
memorized, and recordings can be programmed.Press  EPG.
15:57-16:59 arte    Charmed - Zauberhafte Hexen
16:00-16:15 MDR FERN...   Hier ab vier
16:00-16:10  EinsExtra   EinsExtra Aktuell
16:00-17:15...

Other features
Using EPG menu
Press EPG.
Press  MENU .
EPG menu
Station selection
Data capture on (for DVB + analogue)
Items Description
Select provider In analogue TV reception, there are possibly 
different providers who broadcast the EPG 
data for certain station packages. To get 
another range of stations, you can change 
the provider with the “Select provider”. If the 
provider you are looking for is not in the list, 
then press 
YELLOW to perform a Provider 
search.
The stations offered by the...

Conditional Access Module (CI 
Module)
In order to receive coded digital stations, a Conditional 
Access Module (CI Module) and a CA Card must be 
inserted in the CI slot of your TV set. (Page 6)
The CI Module and the CA Card are not supplied 
accessories. They are usually available from your 
dealer.
Inserting the CA Card into the CI ModuleMake sure the TV set is switched off with the 
main power switch ( a) on the set, or pull the 
AC plug.
  With the side with the gold coloured contact  chip facing...