Sharp Lc 42sb55 Operation Manual

tV menu
This section describes how to adjust sound settings�Press 
1� menu on the remote control and select 
Sound.
Press 
2� ≥ to enter the list.
TV Menu Sound
Sound
Features
Installatio n Sound mode
Vi
rtual surround
Vo lume-visually impaired
Audio language
Dual I-II
Mono/Stereo
Auto volume leveling Settings 
Picture
Press 3� < or > to select one of the following 
settings:
Settings: 
•	
-Bass: Adjusts the bass value to fit your best. 
-treble: Adjusts the treble value to fit your 
best listening....

tV menu
automatically switch the tV to standby 
(Sleeptimer)
Sleeptimer switches the TV to standby after a defined 
period of time�Press 
1� menu on the remote control and select 
Features > timer > Sleeptimer.
Press 
2� ≥ to enter the Sleeptimer menu
Press 
3� < or > to set the sleep time up to 180 
minutes in steps of five minutes. If set to zero 
minutes, the Sleeptimer is switched off.
Press 
4� oK to activate the Sleeptimer.
note  You can always switch off your TV earlier or reset Sleeptimer 
•...

tV menu
use subtitles
You can enable subtitles for each TV channel� Subtitles 
are broadcasted via teletext or DVB-T digital broadcasts� 
With digital broadcasts, you have the additional option of 
selecting a preferred subtitle language�Press 
1� menu on the remote control and select 
Features > Subtitle.
Press 
2� ≥ to enter the list.
TV Menu Features
Sound
Features
Installation Auto lock
Subtitle language
HDMI overscan
Common interfac e
Ti
mer
Picture
Subtitle
Press 3� < or > to select on to display...

tV menu
The first time you set up your TV, you are prompted to 
select an appropriate menu language and to perform 
automatic installation of TV and digital radio channels (if 
available)�
This chapter provides instructions on how to reinstall 
channels as well as other useful channel installation 
features�
note Re-installing channels modifies the 
•	 Channels list�
automatically install channels
This section describes how to search and store 
channels automatically� Instructions are for both digital...

tV menu
installation update
installation update has similar function with 
automatic installation� The difference is you could 
update channel list without erasing the original 
information�Press 
1� menu on the remote control and select 
installation > Channel installation > installation 
update.
Press 
2� ≥ to enter the installation update menu. 
Start now is highlighted.
Press 
3� oK.
Press the green button to start the update. This 
4� may take a few minutes.
When the update is complete, press the...

tV menu
Fine tune analogue channels
You can manually fine tune analogue channels when 
reception is poor�
Press 
1� menu on the remote control and select 
installation > Channel installation > analogue: 
manual installation > Fine tune. 
Press 
2� ≥ to enter the Fine tune menu.
Press 
3� < or > to adjust the frequency.
Press 
4� ≤ when done.
Select 
5� Store current channel to store the fine 
tuned channel under the current channel number.
Press 
6� ≥ to enter.
Press 
7� oK. Done appears.
Press 
8� menu...

tV menu
Source labels
You can assign a label to each input source as you 
prefer in the label list�Go to 
1� installation > Source labels 
Assign a input source and press > to select a 
2� label from label list.
Press 
3� b on the remote control and check the 
result.
assign a channel decoder (For atV)
Decoders that decode channels can be connected to 
SCART � You have to assign the TV channel as a channel 
to be decoded� Then assign the connection where the 
decoder is connected�
Press MENU on the...

Connecting a pC
Connecting a pC
HDmi Connection
Y
LR
LR PbP
SPAU
COMPONENT
Y
LR
PbP
SPAU
COMPONENT
VGA
Y
LR
LR PbCOMPONEVGA
Y
LR
Pb
COMPONE
analogue Connection
 
VGA
AUDIO
PC IN
COMPONENT
PCIN
COMPONENT
VGA AUDIO
PC IN
COMPONENT
PCIN
COMPONENT
Supported display resolutions
Computer formats (pC)
Resolution  Refresh rate 
640 x 480   60Hz 
800 x 600   56Hz 
800 x 600   60Hz 
1024 x 768  60Hz 
1280 x 720  60Hz
1280 x 768  60Hz
1360 x 768  60Hz 
1280 x 1024  60Hz (42” only) 
1920 x 1080  60Hz (42” only)...

appendix
problempossible Solution
No picture 1� Connect power cord correctly �
2�  Turn on power �
3�  Connect signal cable correctly �
4�  Press any button on the LCD TV �
Abnormal colours Connect signal cable correctly�
Twisted picture 1� Connect signal cable correctly �
2�  Please use compatible signal�
Picture too dark Adjust brightness and contrast�
Audio only, no images 1� Please check if input signal is connected correctly �
2�  TV-RF signal must not be lower than 50dB�
Picture only, no audio 1�...

appendix
item26o lCD Colour tV,
model: lC-26SB25e, 
lC-26SB25S32o lCD Colour tV,
model: lC-32SB25e, 
lC-32SB25S42o lCD Colour tV,
model: lC-42SB55e,
lC-42SB55S
LCD screen size 26o diagonal32o diagonal42o diagonal
Number of dots 3,147,264 dots 
(1366 g 768 g 3 dots)3,147,264 dots 
(1366 g 768 g 3 dots)6,220,800 dots  
(1920 g 1080 g 3 dots)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV Function TV-StandardAnalogue CCIR (B/G, I, D/K, L/L’)
Digital DVB-T (2K/8K OFDM)
Receiving 
Channel...