Sharp LC-40LE835U LCD Television User Manual

							69
Using the Internet
+If you cannot connect to the Internet
Perform the procedures below to check your TV's 
network settings.
IP Setup
1 Press EXIT to display the normal TV screen.
2 Press MENU to display the MENU screen, and then 
press
c/
d to select “Initial Setup”.
3 Press a
/
b to select “Internet Setup”, and then 
pressENTER.
4 Press a
/
b to select “Network Setup”, and then 
pressENTER.
5 Press a
/
b to select “IP Setup”, and then press 
ENTER.
Check that numbers are displayed for each setting.
If there are any settings without numbers, specify the 
numbers by following the on-screen instructions.
For information on how to enter text, see page 70.
Example
InitializeChange IP Address  :  Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : No Use
MAC Address  :  XX:XX:XX:XX:XX:XXSetting IP information
[Current Setup]
6 PressMENU to exit.
Setting the Country
1  Repeat steps 1 to 4 in IP Setup.
2 Press a
/
b to select "Country", and then press 
ENTER.
3 Press a
/
b to select "US", "Canada", "Mexico" or 
"Others", and then press ENTER.
If you select “Others”, you need to set the desired area.
4 Press MENU to exit.
Setting the Zip Code
1  Repeat steps 1 to 4 in IP Setup.
2 Press a
/
b to select “Zip Code”, and then press 
ENTER. After “Change” is highlighted, press 
ENTER again.
3  Enter your zip code.
Use0-9 on the remote control unit, or use the software 
keyboard.
4  After “Complete” is highlighted, press ENTER.
5 Press MENU to exit.
•
•
•
•
•
Displaying Updated Information and 
Support Service
This function can be used to display up-to-date 
information on the original home page and allow you to 
receive support service over the network.
Original Home Page
1 Press APPS to display the application window.
2 Press 
c/
d to select "AQUOS NET" and then press 
ENTER.
You can also display the original home page by 
pressingFAV APP on the remote control unit. See 
page 36 for details on the FAV APP key Assign 
function.
Each time you select "AQUOS NET" from the 
application window or press FAV APP, the screen 
image toggles as shown below:
TV+Web      Web      TV
When you are not connected to the Internet, a network 
function explanation screen is displayed.
The services displayed vary depending on circumstances.
3 Press a
/
b/c
/d
 to select a title, and then press 
ENTER.
The service details vary depending on circumstances.
4 PressEXIT to return to the normal TV screen.
Web page appearances may differ depending on the type 
of screen (TV+Web or Web).
When displaying TV+Web with a channel in which the 
V-Chip is enabled, the cursor keys on the remote control 
unit do not function.
AQUOS Advantage Live
1 Press APPS to display the application window.
2 Press 
c/
dto select “AQUOS ADVANTAGE LIVE”, 
and then press ENTER.
You can also display the AQUOS ADVANTAGE LIVE 
screen by pressing FAV APP on the remote control 
unit. See page 36 for details on the FAV APP Key 
Assign function.
3 Press a
/
b/
c/
d to select the desired service.
4 Press EXIT to return to the normal TV screen.
The display may change as a result of a software update.•
•
•
•
•
•
•
•
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							70
Entering Text (Software Keyboard)
When you are editing an input screen or specifying the 
Ethernet settings used for accessing the Internet, enter 
text from the software keyboard.
You can enter up to 128 characters for text. •
Buttons Description
aMoves the focus up. When the focus is at the top edge, this moves the focus to 
the opposite edge (bottom edge). 
bMoves the focus down. When the focus is at the bottom edge, this moves the 
focus to the opposite edge (top edge). 
cMoves the focus left. When the focus is at the left edge, this moves the focus to 
the opposite edge (right edge).
When the focus is on “Character Set”, this selects the character type (moving 
backwards).
When the focus is in an input box, this moves the cursor in the input box to the left. 
dMoves the focus right. When the focus is at the right edge, this moves the focus to 
the opposite edge (left edge).
When the focus is on “Character Set”, this selects the character type (moving 
forwards).
When the focus is in an input box, this moves the cursor in the input box to the 
right.
ENTERPerforms the processing for the button currently in the focus. 
EXITCloses the software keyboard without applying the original input elements for the 
entered text.
Erases the text in the input box where the cursor is currently located. 
RETURNWhen the cursor is at the end of a sentence, this acts as a backspace. 
0-9Directly enters the single-byte number for that button.
A (red)Directly enters prediction candidate 1. 
B (green)Directly enters prediction candidate 2.
C (blue)Directly enters prediction candidate 3.
D (yellow)Enters a space. 
Caps Off/Caps On/Caps Lock
If “alphabet” is selected in “Character Set”, this switches 
characters between uppercase and lowercase.
Each time you press ENTER, the character type switches as 
shown below:
Caps Off: all the characters are lowercased
Caps On: only the fi rst character is uppercased
Caps Lock: all the characters are uppercased
Done
Applies the entered information and closes the software 
keyboard.
Quit
Closes the software keyboard without applying the entered 
information.
You can also close the software keyboard by pressing 
EXIT on the remote control unit.
Displays the icon “”, indicating that a new line has been 
inserted.
Clear
Erases the character string.
When the cursor is somewhere in a line: the character 
string to the right of the cursor will be erased.
When the cursor is at the right end of a line: the entire line 
will be erased.
Delete
If the cursor is at the right end of a line, this erases text one 
character at a time.
You can also delete text by pressing RETURN on the 
remote control unit. •
•
•
•
Using the Internet
The text you enter is displayed as you type it in. 
To move the cursor (the current input position), use 
“
” or “” on the software keyboard.
Press
c/
d to select the type of characters entered: 
alphabet, number or sign.
(The selectable types depend on the input source.)
While you are entering text, likely input conversion candidates 
are displayed based on what you typed in.
You can also enter text by pressing A,B or C on the remote 
control unit. •Enters a space.
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							71
Using the Browser
ENTER,
a/
b/
c/
d• Press a/
b/
c/
dto select a link that you want to jump, 
and then press ENTER.
EXIT•  Press the button to return to the TV screen.
RETURN•  Press the button to return to the previous page.
Example : The image shown below, which is only for 
explanation, is subject to change.
About links
Web pages on the Internet often include “links” that 
allow you to jump to other web pages (or sites).
“Links” can take various forms, including words 
or images, but they always work in the same way 
letting you jump to the link destination when you 
select them.
Selected items (such as links of text input fi elds) are 
enclosed in a yellow frame.
You can jump from a “link” to the corresponding link 
destination.
CAUTION
If the power is cut due to a power failure or the TV being 
unplugged while you are using the Internet, information 
such as bookmarks or cookies may not be saved correctly.
When a security notifi cation window is displayed:
Press
ENTER to close the window.
This window appears when you visit a web page that has 
security protection, or when you move from a protected 
page to an unprotected page.
In “Security Settings” you can set whether or not this 
window is displayed. (See page 74.)
When a cookie confi rmation window appears:
Choose whether or not to accept the cookie (see page 74), 
and then press 
ENTER.
In “Cookies” settings you can set whether or not this 
window is displayed. You can also opt to delete all the 
cookies at once. (See page 74.)
To users who access the Internet from a PC
When you access the Internet from this TV, the 
procedures may not be the same as regular 
browser-based access on a PC.
You cannot download fi les.
You cannot view a history of the pages you have 
visited.
You cannot change the startup page displayed 
when you start AQUOS Net.
Pop-up windows appear in separate tabs.
On some pages, video and audio cannot be 
played, and text or images may not be displayed 
correctly. •
•
•
•
•
• •
•
•
•
•
•
•
•
•
When “z” is displayed in a page:The page failed to load successfully, or it contains images 
with formats that cannot be displayed on the TV. Try 
reloading the page by selecting “
” (see page 72) in the 
toolbar. •
Using the Internet
Photo PlayerPhoto Player
:Tool:Tool:Scroll:ScrollAQUOSAQUOSConsole
Click   this  bu t t on  to  go   to  AQUOS  Network.
Page  1
       o f  3Add WidgetsAdd Widgets
LegalLegal
AQUOSAQUOSCenterAQUOSAQUOS NetworkNetworkWhat’s NewWhat’s New
Feaeatured Cured Content
SportsSports
EntertainmentEntertainment
AQUOSGalleryallery
CONSOLE
MondayMondayTodayTodayWednesdayWednesdayTuesdayTuesday
AQUARIUSAQUARIUSGEMINIGEMINIPISCESPISCESARIESARIES
D
Pages with security protection are 
clearly shown as such.
If content on a page is continued on another page, 
directions to that page are shown clearly.
You can use 
a/
b/
c/
d to go to the continuation of a 
page.
Where there is link text or a link image in the 
direction pressed, the text or image is selected fi rst. 
If this happens, press the same direction button 
several times. • Tab
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							72
Using the Toolbar
You can use the toolbar to control the browser and to 
specify settings.
1 PressD on the remote control unit to display the 
toolbar.
2 Press
c/
d to select a function, and then press 
ENTER.
Selected item Description
Displays the linked page in a new tab.
Displays the Tab menu.
Returns to the previous page.
Goes back to the original page when you 
have viewed the previous page.
Refreshes the page.
Interrupts a page while it is loading.
Displays the original home page.
Select this to open a bookmark.
Adds the current page to your bookmarks.
Displays the Browser menu.
Using Tabs
You can use tabs to view up to 3 web pages at the 
same time. Each page appears in a separate tab, and 
you can switch between the tabs.
1 PressB on the remote control unit to display the 
Tab menu.
You can also display the Tab menu by clicking “” in 
the toolbar.
Selected item Description
Select ThisDisplays the web page in the 
selected tab.
Close This TabCloses the selected tab.
You can also press C on the 
remote control unit to close a 
tab. •
Close Other TabsCloses the other (unselected) tabs.
Create New TabCreates a new tab.
You can also press A on the 
remote control unit to create a 
tab. •
2 Press
c/
d to select a tab.
3 Press
a/
b to select the item you want to use, and 
then press ENTER.
•
Using the Internet
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							73
Saving the URL of the Current Page
Adding a web page to your bookmarks allows you to 
return to that page later by simply selecting it from your 
list of bookmarks.
1 Display the page that you want to bookmark.
2 PressD on the remote control unit to display the 
toolbar.
3 Press
c/
d to select “”
 in the toolbar, and then 
pressENTER.
4 Select “Yes”, and then press ENTER.
The page is added to your bookmarks.
Opening a Bookmarked Page
1 PressD on the remote control unit to display the 
toolbar.
2 Press
c/
d to select “”
 in the toolbar, and then 
pressENTER.
Your bookmarks list is displayed.
3 Press
a/
b/
c/
d to select the page you want to 
access, and then press ENTER.
The selected page is displayed.
If you have bookmarked 11 or more web pages, press 
c/
d to scroll through your bookmarks list. 
When opening a bookmark in a new tab:
1
 PressA instead of ENTER.The Bookmarks menu appears.
2 Select “Open in New Tab”, and then press 
ENTER.
•
•
•
•
•
Editing Bookmarks
You can rearrange or delete the  bookmarks.
Switching between the URL and title name
1 PressD on the remote control unit to display the 
toolbar.
2 Press
c/
d to select “”
 in the toolbar, and then 
pressENTER.
Your bookmarks list is displayed.
3 Press
a/
b to select the title you want to edit from 
the bookmarks list, and then press A on the remote 
control unit.
The Bookmarks menu appears.
4 Select “Display by Address” or “Display by Title” in 
the Bookmarks menu, and then press ENTER.
Rearranging displayed items
1 PressD on the remote control unit to display the 
toolbar.
2 Press
c/
d to select “”
 in the toolbar, and then 
pressENTER.
Your bookmarks list is displayed.
3 Press
a/
b to select the title you want to display 
in a different position from the bookmarks list, and 
then press A on the remote control unit.
The Bookmarks menu appears.
4 Press
a/
b to select “Move Up” or “Move Down”, 
and then press ENTER.
Deleting bookmarks
1 PressD on the remote control unit to display the 
toolbar.
2 Press
c/
d to select “”
 in the toolbar, and then 
pressENTER.
Your bookmarks list is displayed.
3 Press
a/
b to select the title you want to delete, 
and then press A on the remote control unit.
The Bookmarks menu appears.
4 Press
a/
b to select “Delete”, and then press 
ENTER.
To delete all the bookmarks, select “Delete All”.
5 Press
c/
d to select “Yes”, and then press 
ENTER. ■
•
•
■
•
•
■
•
•
•
Using the Internet
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							74
Browser Settings
You can check or modify your browser settings from 
the Browser menu. 
The Browser menu includes a display settings menu 
and a security settings menu.
1 PressD to display the toolbar.
2 Press
c/
dto select “”
 in the toolbar, and then 
pressENTER.
3 Press
c/
d to select the settings menu you want to 
access.
4 Press
a/
b to select and confi rm the item you want 
to set.
5 Press
a/
b/
c/
d to specify the required setting, 
and then press ENTER.
6 PressD to exit.
View Settings
Zoom In/Out:
Zoom in: Displays content enlarged to 200%.
Normal: Displays content at 100%.
Zoom out: Displays content reduced to 75%.
Encoding: Selects the desired encoding from the list below:
Western (ISO-8859-1)/Unicode (UTF-8)
Page Information: Displays information about the currently 
displayed page.
Reset:
Yes: Resets the browser settings.
No: Does not reset the browser settings.
“Reset” does not reset the certifi cation enable/disable and 
Encoding settings. •
Security Settings
Security:
Save Setting: If you select this option, a message is 
displayed when you move from a protected page to an 
unprotected page.
To change this setting, remove the tick, select “Save 
Setting” and then press ENTER.
Root Certifi cates/CA Certifi cates: Displays the list of 
certifi cates. To disable a certifi cate, select the certifi cate 
to be disabled and press A to display the sub-menu. 
Select “Disable”, and then press ENTER.
Disabled certifi cates are shown unticked in the 
certifi cate list screen.
Cookies:
Accept all: Select this option to accept all cookies.
Reject all: Select this option when you do not want to 
accept cookies.
Prompt before accepting: When you open a page 
that uses cookies, this option displays a confi rmation 
message.
Delete All Cookies: Deletes all your cookies.
Server Certifi cates: Displays certifi cates for the connected 
server.
Browser Information: Displays browser information.
•This product contains NetFront Browser of 
ACCESS CO., LTD.
•ACCESS, the ACCESS logo and NetFront 
are registered trademarks or trademarks of 
ACCESS CO., LTD. in the United States, 
Japan and/or other countries.
  © 2009 ACCESS CO., LTD. All rights 
reserved.
•This software is based in part on the work of 
the Independent JPEG Group.
•
Using the Internet
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							
75
Using the Internet
Using Applications via the Internet
By connecting the TV to the Internet, you can enjoy a 
variety of broadband content, including videos, movies, 
music, photos, and games.
Please check that the most current software is 
loaded on TV by selecting "Auto Update Setting" on 
"Software Update" (see page 39) or by visiting 
http://www.sharpusa.com/products/support/
to check for a download of the newest software version.
1PressAPPS to display the application window.
Example
APP1 APP2 APP3
2Press
a/
b /
c /
d  to select the desired application, 
and then press  ENTER.
If "" is displayed after you connect to the Internet, 
check your TV's network settings and connection.
When using this TV to access an Internet application 
for the fi rst time, the Disclaimer appears on the screen. 
Press a/
b  to select "Agree", and then press 
ENTER.
(You must select "Agree" to use the application.)
Additional applications will be available in the future.
3  The screen for the selected application is displayed. 
Follow the on-screen instructions for each 
application.
Check the web site of the provider for details on setup 
and use of the functions.
These applications are provided by content providers. The 
available applications vary depending on your country or 
region.
The delivery speed of applications varies depending on 
the network speed. Check the web site of the provider for 
details on application setup and other information. •
•
•
•
•
•
Example
Menu
Identification
Software Update Digital Caption Info.
Netflix Help
Vudu Help
Information
Information
Deactivating Netfl
 ix Function
1 Press MENU to display the menu screen.
2 Press 
c/
d  to select "Information", and then press 
ENTER .
3 Press 
a/
b  to select "Netfl ix Help", and then press 
ENTER .
4 Press 
c/
d  to select "Deactivate", and then press 
ENTER .
To confi rm the Netfl ix status, check the information 
displayed on the screen and click "OK".
Deactivating the VUDU Function
1PressMENU  to display the menu screen.
2Press
c/
d  to select "Information", and then press 
ENTER .
3Press
a/
b  to select "Vudu Help", and then press 
ENTER .
4Press
c/
d  to select "Yes", and then press 
ENTER .
•
-$@@@-&6@&@JOEE


-$@@@-&6@&@JOEE








 
						

							76
Using the Internet
DISCLAIMERS
This Sharp device facilitates the access to content and services provided by third parties. The content and 
services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such 
third party content and services must be in accordance with any authorization or terms of use provided by 
such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by 
such authorization or terms of use. Unless otherwise specifi cally authorized by the applicable content or service 
provider, all third party content and services provided are for personal and non-commercial use; you may not 
modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works 
from, transfer or sell in any manner or medium any content or services available via this device.
Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or 
services. Any questions, comments or service-related inquiries relating to the third party content or service 
should be made directly to the applicable content or service provider.
You may not be able to access content or services from the device for a variety of reasons which may be 
unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure to 
confi gure your device properly. Sharp, its directors, offi cers, employees, agents, contractors and affi liates shall 
not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause 
or whether or not it could have been avoided.
ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU 
ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY 
OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT 
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR 
PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, 
TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE 
OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET 
YOUR REQUIREMENTS OR EXPECTATIONS.
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF 
THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE 
RELATED TO SUCH THIRD PARTY PROVIDERS.
IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY 
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER 
THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, 
STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							77
Appendix
Removing the Stand
•Before detaching (or attaching) the stand, unplug the AC cord.
CAUTION
•  Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
LC-40LE835U/LC-46LE835U/LC-52LE835U
Before attaching/detaching the stand
•  Before performing work, make sure to turn off the TV.
•  Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being 
damaged.
2
11
Loosen the screw used to secure the stand cover 
and remove the cover.1 Unfasten the four screws used to secure the 
stand in place. 
2 Detach the stand from the TV. (Hold the stand so 
it will not drop from the edge of the base area.)
12LC-40LE835ULC-46LE835U
LC-52LE835U
•  To attach the stand, perform the above steps in reverse order.
LC-60LE835U
Before attaching/detaching the stand
•  Before performing work, make sure to turn off the TV.
Unfasten the four screws used to 
secure the stand in place. Detach the stand from the TV.
13 2
1Loosen the screw used to 
secure the stand cover.
2Remove the cover.
2
1
•  To attach the stand, perform the above steps in reverse order.
■
■
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							
Optional Accessories
The listed optional accessories are available for the Liquid 
Crystal Television. Please purchase them at your nearest 
shop.
•  Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for 
compatibility and check the availability.
Part name Model number
Wall mount 
bracket AN-37AG2 (for LC-40LE835U)
Attachment AN-37P30 (for LC-40LE835U)
Wall mount 
bracket AN-52AG4 (for LC-46LE835U/
LC-52LE835U/LC-60LE835U)
3D Glasses AN-3DG10-S AN-3DG10-R
AN-3DG10-A
78
•  Detach the cable tie on the rear of the TV when using the optional mount\
 
bracket.
•  Due to the terminal confi guration on this TV, when you wall-mount this 
model, make sure there is enough space between the wall and the TV for 
the cables.
•  To use this TV mounted on a wall, remove the AC cord holder and the  covers at the 4 locations on the rear of the TV, and then use the screws\
 
supplied with the wall mount bracket to secure the bracket to the rear o\
f 
the TV.
2
1
1
2
1
1
Setting the TV on the Wall
CAUTION
LC-40LE835U•  This TV should be mounted on the wall with both the AN-37AG2 (SHARP) w\
all mount bracket and the AN-37P30 (SHARP) attachment of the wall mount bracket. The TV cannot be mounted\
 when with only the AN-37AG2 wall 
mount bracket. The use of other wall mount brackets may result in an uns\
table installation and may cause 
serious injuries.
LC-46LE835U/LC-52LE835U/LC-60LE835U•  This TV should be mounted on the wall only with the wall mount bracket A\
N-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause\
 serious injuries.
•  Installing the TV requires special skill that should only be performed b\
y qualifi  ed service personnel. Customers 
should not attempt to do the work themselves. SHARP bears no responsibil\
ity for improper mounting or 
mounting that results in accident or injury.
Using an optional bracket to mount the TV
•
You can ask a qualifi ed service professional about using an optional AN-37AG2+AN-37P30 or AN-\
52AG4 bracket to 
mount the TV on the wall.
•  Carefully read the instructions that come with the bracket before beginn\
ing work.
Appendix
Hanging on the wall
AN-37AG2+AN-37P30 or AN-52AG4 wall
mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
Vertical mounting Angular mounting
LC-40/46/52LE835U
0/5/10/15/20°
LC-60LE835U
0/5/10°AN-37AG2 + AN-37P30
LC-40LE835U
• The center of the display:
1/32 inch (0.5 mm) above the “A” position.
AN-52AG4
LC-46LE835U
• The center of the display:
3/32 inch (2.0 mm) under the “b” position.
LC-52LE835U
•  The center of the display:9/32 inch (7.0 mm) under the “b” position.
LC-60LE835U•The “e” position is at the center of the display.
•Refer to the operation manual of AN-37AG2+AN-37P30 or AN-52AG4 for details.
-$@@@-&6@&@JOEE


-$@@@-&6@&@JOEE