Sharp LC-40LE835U LCD Television User Manual

							LC-40LE835U/LC-46LE835U/LC-52LE835U/LC-60LE835U  OPERATION MANUAL    MODE DEMPLOI    MANUAL DE OPERACIÓN
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-F027WJZZ
11P01-MX-NM
ENGLISHFRANÇAISESPAÑOL
IMPORTANT  :  Please read this operation manual before starting operating the equipment.
IMPORTANT  :  Veuillez lire ce mode demploi avant de commencer à utiliser lappareil.
IMPORTANTE  :  Lea este manual de operación antes de comenzar a operar el equipo.
LC-40LE835U
LC-46LE835U
LC-52LE835U
LC-60LE835U
LIQUID CRYSTAL TELEVISIONTÉLÉVISEUR ACL
TELEVISOR CON PANTALLA  DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE DEMPLOI
MANUAL DE OPERACIÓN
ENGLISHFRANÇAISESPAÑOLENGLISHFRANÇAISESPAÑOL
-$@@@-&6@&@$PWFSJOE



-$@@\
@-&6@\
&@$PWFSJOE
\


 



\



\
 
						

							Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
Dimensional Drawings
LC-52LE835U
LC-60LE835U
15 3/4 (400)
15 3/4 (400) 7 
3/32 (180)
3/4 (19)
8 15/32 (215)
47 
31/64 (1206)
30 63/64 (787)
 29 
1/16 (738)
19 31/32 (507)
45 
23/64 (1152.0)*1
15 3/4 (400)
4 
19/64 (109)
AN-52AG4
20°
1 
5/16 (33.4)*3
1 5/8 (41)*4
1 3/64 (26.4)*2
15 3/4 (400)
15 3/4 (400)
9 
1/16 (230)
2 
1/16 (52)
54 29/64 (1383)
34 31/32 (888)
33 
1/32 (839)
19 
9/64 (486)
21 7/64 (536) 8 
15/32 (215)
AN-52AG4
52 11/32 (1329.12)*1
15 3/32 (383)
17 
31/64 (444) 5 
23/32 (145)10°
14 
27/64 (366) 1 
5/16 (33.4)*3
1 5/8 (41)*4
1 3/64 (26.4)*2
29 7/16*1
(747.63)
6 5/16 
(160)
8 
13/64 
(208)
3 63/64 
(101)
25 33/64*1
(648.0)
17 11/64 
(436)
3 63/64(101) 12 9/32(312)
11 47/64
(298)
5 11/64 
(131)
11 
35/64 
(293)
*1  Active area/Área activa/Zone active*2  Thinnest part/Parte más delgada/Partie la plus mince*3  Excluding projecting parts/Excluyendo partes salientes/Sauf les parties \
saillantes*4  Including projecting parts/Incluyendo partes salientes/Parties saillante\
s incluses
-$@@@-&6@&@$PWFSJOE



-$@@\
@-&6@\
&@$PWFSJOE
\


 



\



\
 
						

							TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: 
The lightning flash with arrow-head 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product's 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a 
triangle is intended to alert the user 
to the presence of important 
operating and maintenance 
(servicing) instructions in the 
literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE 
SLOT, FULLY INSERT. CAUTION:
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly 
approved by the manufacturer could void the user's authority to operate this equipment.
1
OPERATION MANUAL
IMPORTANT:
To aid reporting in case of loss or theft, please record the 
TV's model and serial numbers in the space provided. The 
numbers are located at the rear of the TV.Model No.:
Serial No.:
LIQUID CRYSTAL TELEVISION
ENGLISH
IMPORTANT INFORMATION
ENGLISH
LC-40LE835U
LC-46LE835U
LC-52LE835U
LC-60LE835U
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							INFORMATION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY:SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-40LE835U/LC-46LE835U/LC-52LE835U/LC-60LE835UThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National 
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the 
grounding system of the building, as close to the point of cable entry as practical.”
This product qualifies for ENERGY STAR when "Home" is selected for "TV Location".
Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use.
FCC Compliance StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
Wireless Radio
For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.
This device is going to be operated in 5.15–5.25GHz frequency range, it is restricted in indoor environment only.
Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s 
authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Industry Canada StatementThis Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation of the device. This device and its antenna(s) must not be colocated or 
operation in conjunction with any other antenna or transmitter.
Wireless Radio
For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure.
Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where
required by the technology.
Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s 
authority to operate the equipment.
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator 
& your body.
CAUTION:This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other 
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded 
cables and connectors for connections.
2
IMPORTANT INFORMATION
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage 
if improperly handled. This product has been engineered and manufactured with the highest priority on safety. 
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please 
observe the following instructions when installing, operating and cleaning the product. To ensure your safety 
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully 
before using the product.
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.
11)  Only use attachments/accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold 
with the apparatus. When a cart is used, use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when unused for long periods of time.
14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate 
normally, or has been dropped.
Additional Safety Information
15)  Power Sources—This product should be operated only from the type of power source indicated on the 
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or 
local power company. For products intended to operate from battery power, or other sources, refer to the 
operating instructions.
16)  Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this 
can result in a risk of fire or electric shock.
17)  Object and Liquid Entry—Never push objects of any kind into this product through openings as they may 
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill 
liquid of any kind on the product.
18)  Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified 
service personnel under the following conditions:
a)  When the AC cord or plug is damaged,
b)  If liquid has been spilled, or objects have fallen into the product,
c)  If the product has been exposed to rain or water,
d)  If the product does not operate normally by following the operating instructions.
  Adjust only those controls that are covered by the operating instructions as an improper adjustment 
of other controls may result in damage and will often require extensive work by a qualified technician 
to restore the product to its normal operation,
e)  If the product has been dropped or damaged in any way, and
f)  When the product exhibits a distinct change in performance - this indicates a need for service.
19)  Replacement Parts—When replacement parts are required, be sure the service technician has used 
replacement parts specified by the manufacturer or have the same characteristics as the original part. 
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20)  Safety Check—Upon completion of any service or repairs to this product, ask the service technician to 
perform safety checks to determine that the product is in proper operating condition.
21)  Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product 
according to the method recommended by the manufacturer.
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years 
of trouble-free operation of your product, please read the Important Safety Instructions carefully before 
using this product.
IMPORTANT SAFETY INSTRUCTIONS
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							
IMPORTANT SAFETY INSTRUCTIONS
4
•  Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna 
system is grounded so as to provide some protection against 
voltage surges and built-up static charges.
  Article 810 of the National Electrical Code, ANSI/NFPA 70,  provides information with regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of antenna-discharge unit, connection to grounding 
electrodes, and requirements for the grounding electrode.EXAMPLE OF ANTENNA GROUNDING AS PER 
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
NEC — NATIONAL ELECTRICAL CODE
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING 
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
•  Water and Moisture — Do not use this product near water - for example\
, near a bath tub, wash bowl, kitchen sink, or 
laundry tub; in a wet basement; or near a swimming pool; and the like.
•  Stand — Do not place the product on an unstable cart, stand, tripod o\
r table. Placing the product on an unstable base  can cause the product to fall, resulting in serious personal injuries as\
 well as damage to the product. Use only a cart, 
stand, tripod, bracket or table recommended by the manufacturer or sold \
with the product. When mounting the product 
on a wall, be sure to follow the manufacturer's instructions. Use only t\
he mounting hardware recommended by the 
manufacturer.
•  Selecting the location — Select a place with no direct sunlight and g\
ood ventilation.
•  Ventilation — The vents and other openings in the cabinet are designe\
d for ventilation. Do not cover or block these vents  and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the p\
roduct. Do not place 
the product on a bed, sofa, rug or other similar surface, since they can\
 block ventilation openings. This product is not 
designed for built-in installation; do not place the product in an enclo\
sed place such as a bookcase or rack, unless proper 
ventilation is provided or the manufacturer's instructions are followed.\
•  The front panel used in this product is made of glass. Therefore, it can\
 break when the product is dropped or applied with  impact. Be careful not to be injured by broken glass pieces in case the \
panel breaks.
•  Heat — The product should be situated away from heat sources such as \
radiators, heat registers, stoves, or other  products (including amplifi ers) that produce heat.
•  The Liquid Crystal panel is a very high technology product with 2,073,60\
0 pixels, giving you fi ne picture details.
  Occasionally, a few non-active pixels may appear on the screen as a fi\
 xed point of blue, green, red or yellow. Please note  that this does not affect the performance of your product.
•  Lightning — For added protection for this television equipment during\
 a lightning storm, or when it is left unattended and  unused for long periods of time, unplug it from the wall outlet and disc\
onnect the antenna. This will prevent damage to 
the equipment due to lightning and power-line surges.
•  Power Lines — An outside antenna system should not be located in the \
vicinity of overhead power lines or other electric  light or power circuits, or where it can fall into such power lines or c\
ircuits. When installing an outside antenna system, 
extreme care should be taken to keep from touching such power lines or c\
ircuits as contact with them might be fatal.
•  To prevent fi re, never place any type of candle or fl ames on the top or near the TV set.
•  To prevent fi re or shock hazard, do not place the AC cord under the TV set or other h\
eavy items.
•  Do not display a still picture for a long time, as this could cause an a\
fterimage to remain.
•  To prevent fi re or shock hazard, do not expose this product to dripping or splashing.\
  No objects fi lled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects i\
n the air vents or other openings may  result in fi re or electric shock. Exercise special caution when using the product ar\
ound children.
Precautions when transporting the TV
•  When transporting the TV, never carry it by holding or otherwise putting\
 pressure onto the display. Be sure to always  carry the TV by two people holding it with two hands — one hand on ea\
ch side of the TV.
Caring for the cabinet
•  Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.
•  Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the\
 components of the main unit cabinet or cause 
cracking.
•  Wiping with a hard cloth or using strong force may scratch the surface o\
f the cabinet.
•  If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted with water a nd
thoroughly wrung out, and then wipe with a soft dry cloth.
•  Avoid using benzene, thinner, and other solvents, as these may deform th\
e cabinet and cause the paint to peel off.
•  Do not apply insecticides or other volatile liquids. 
  Also, do not allow the cabinet to remain in contact with rubber or vinyl\
 products for a long period of time. Plasticizers  inside the plastic may cause the cabinet to deform and cause the paint t\
o peel off.
-$@@@-&6@&@JOEE


-$@@@-&6@&@JOEE








 
						

							IMPORTANT SAFETY INSTRUCTIONS
5
Caring for the front panel
•  Turn off the main power and unplug the AC cord from the wall outlet before handling.
•  Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.).
  To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry 
sheet type cloth, etc.). This may damage the surface of the front panel.
•  Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
•  Use a soft damp cloth to gently wipe the front panel when it is really dirty.
  (It may scratch the surface of the front panel when wiped strongly.)
•  If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
•  To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are 
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for 
ordering, or VISIT http://www.sharpusa.com/SharpDirect.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger fl at panel displays 
are popular purchases. However, fl at panel displays are not always supported on the proper 
stands or installed according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, 
speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable 
and safe.
TUNE INTO SAFETY
One size does NOT fi t all. Follow the manufacturer’s recommendations for the safe installation 
and use of your fl at panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place fl at panel displays on furniture that can easily be used as steps, such as a chest 
of drawers.
Remember that children can become excited while watching a program, especially on a 
“larger than life” fl at panel display. Care should be taken to place or install the display where it 
cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the fl at panel display so that 
they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such 
as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your fl at panel display, contact your retailer about professional 
installation.
Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be 
mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
Note:CEA is the preeminent trade association promoting growth in the $161 billion U.S. 
consumer electronics industry. More than 2,200 companies enjoy the benefi ts of CEA 
membership, including legislative advocacy, market research, technical training and 
education, industry promotion and the fostering of business and strategic relationships
.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							6
3D Glasses
Prevention of accidental ingestion
•  Keep the batteries and band accessory out of the reach of small children. Small children can accidentally swallow these 
parts.
–  If a child accidentally swallows any of these parts, seek immediate medical attention.
Do not disassemble
•  Do not disassemble or modify the 3D Glasses.
Caution for lithium battery
•  Batteries must not be exposed to excessive heat such as direct sunlight or fi re.
•  Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.
•  Take care not to reverse the battery poles (+ and –) when loading the battery. Follow the correct procedure when loading 
the battery. Loading the battery incorrectly may damage the battery or cause it to leak battery fl uid, which could result in 
a fi re, injury or damage.
Handling the 3D Glasses
•  Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may damage the glass section, which may result in 
injury.
•  Be careful not to trap your fi nger in the hinge section of the 3D Glasses. Doing so may result in injury.
–  Pay special attention when children are using this product.
Using the 3D Glasses
•  Parents/guardians should monitor children's viewing habits to avoid their prolonged use without rest periods.
•  Use only the 3D Glasses recommended for this TV.
•  Use the 3D Glasses only for the specifi ed purpose.
•  Do not move around while wearing the 3D Glasses. The surrounding area appears dark, which may result in falling or 
other accidents that may cause injury.
Viewing 3D images
•  If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.
•  Do not use the 3D Glasses if they are cracked or broken.
IMPORTANT SAFETY INSTRUCTIONS
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC








 
						

							
7
Contents
IMPORTANT INFORMATION ..................... 1
DEAR SHARP CUSTOMER  ....................... 3
IMPORTANT SAFETY INSTRUCTIONS  ........ 3-6
Supplied Accessories  ............................ 8
QUICK REFERENCE Attaching the Stand  ............................ 8
QUICK INSTALLATION TIPS  .................. 10
Using the Remote Control Unit  ................ 10
Preparation Antennas  ...................................... 11
Installing Batteries in the Remote Control Unit ... 11
Part Names TV (Front)  ..................................... 12
TV (Rear)  ...................................... 12
Remote Control Unit  ........................... 13
Introduction to Connections Experiencing HD Images  ...................... 14
Types of Connection  .......................... 14
Displaying an External Equipment Image  ....... 14
Connecting to External Equipment Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box  ...........15-16
Connecting a VCR, Game Console,  Camcorder or Cable/Satellite Set-top Box  .... 16
Connecting an Audio Amplifi er  ................. 17
Connecting an AV Amplifi er  .................... 17
Connecting a PC  .............................. 18
Watching TV Turning On/Off the Power  ..................... 19
Initial Installation  ............................ 19-21
Direct Button Operation Changing Channels    ....................... 22
Changing Volume  .......................... 22
MUTE ...................................... 22
Sleep Timer  ................................ 22
FLASHBACK  ............................... 22
FREEZE  .................................... 22
AV MODE  .................................. 23
INPUT  ...................................... 23
APPS  ...................................... 23
POWER SAVING  ........................... 23
Closed Captions and  Digital Closed Captions  ................... 24
VIEW MODE  ............................... 25
On-Screen Display Menu On-Screen Display Menu Operation  ........... 26
Menu Operation Buttons  ...................... 26
Menu Items  ................................... 27
Picture Settings  ............................ 28-29
Audio Settings  ................................ 30
Power Control  ................................. 31
System Options  ............................ 32-34
Initial Setup ................................. 35-38
Information  ................................. 39-41Enjoying 3D Image Viewing
Display Methods for 3D and 2D Images  ........ 42
Viewing 3D Images  ......................... 43-44
Configuring the TV Settings to Enhance  3D Image Viewing ......................... 44-46
Enjoying Photo/Music/Video Playback Connecting a USB Memory Device/USB Hard Drive  .............................. 47
Connecting a Home Network (DLNA) Server . . . 47
Select the Files to Play Back  ................... 48
Playing Back Files 
on a USB Memory Device  .................49-53
Playing Back Files  on a Home Network (DLNA) Server  .......54-55
Other Viewing Options Presetting Remote Control Function  ........... 56
Operating the Connected Equipment  .......56-57
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK  ....................... 58-60
Link Operation Menu  ....................... 60-61
Using a PC Displaying a PC Image on the Screen  .......... 62
Adjusting the PC Image  ....................... 63
Setting Audio Input  ............................ 63
PC Compatibility Chart  ........................ 63
Control of the TV  ........................... 64-65
Using the Internet Connecting to the Internet  ..................66-67
Internet Setup  .............................. 68-69
Displaying Updated Information and  Support Service  ............................. 69
Entering Text (Software Keyboard)  ............. 70
Using the Browser  .......................... 71-74
Using Applications via the Internet  ............. 75
Appendix Removing the Stand  ........................... 77
Setting the TV on the Wall  ..................... 78
Optional Accessories  .......................... 78
Troubleshooting  ............................ 79-80
Troubleshooting - 3D Images  .................. 80
Troubleshooting - Error Message  .............. 80
Trademarks  ...................................... 81
Specifi  cations
TV  ......................................... 82-83
Wireless LAN  .................................. 84
Information on the Software License for  This Product  ................................. 85-86
Calling for Service  ............................... 87
LIMITED WARRANTY  ............................ 87
Dimensional Drawings
•The dimensional drawings for the LCD TV set are shown 
on the inside back cover.
•  The illustrations and on-screen displays in this operation manual are fo\
r explanation purposes and may vary slightly from  the actual operations.
•  The examples used throughout this manual are based on the LC-60LE835U mo\
del.
-$@@@-&6@&@JOEE


-$@@@-&6@&@JOEE








 
						

							8 Make sure the following accessories are provided with the product.
■ Operation manual (
g1)
■ Connection guide (
g1)
Remote control unit 
(
g1)
Page 10“AAA” size battery 
(
g2)
Page 11Cable tie 
(
g1)
Page 10Stand unit
(
g1)
Page 8 LC-40LE835UStand unit
(
g1)
Page 9 LC-46LE835U
LC-52LE835UStand unit
(
g1)
Page 9 LC-60LE835U
•  Always use the AC cord supplied with the TV.
  •  The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
■ LC-40LE835U
1
 Confi rm that there are 7 screws (3 long screws, 3 
middle screws and 1 short screw) supplied with the 
stand unit.
2
 Attach the supporting post for the stand unit onto 
the base as shown below.
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the 
supporting post in the direction indicated below and 
attach the stand to the TV with the wider side of the 
base facing forward.
2
1
Long screws
Forward
3
 Insert the stand into the openings on the rear of the 
TV.
Soft cushion
•
4
 Insert and tighten the 3 screws into the 3 holes on 
the rear of the stand unit.
Middle screws
5
 1 Insert the stand cover.
 2 Insert the screw to secure the stand cover.
2
1
Short screw
 •  To detach the stand, perform the steps in reverse 
order.
Supplied Accessories
QUICK REFERENCE
Attaching the Stand
•  Before attaching (or detaching) the stand, unplug the AC cord.
•  Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
-$@@@-&6@&JOEC


-$@@@-&6@&JOEC