Sharp LC-40LE835U LCD Television User Manual

19
Turning On/Off the Power
POWER
POWER (On/Standby)
PressPOWER on the TV or on the remote control unit 
to turn the power on.
•  The Initial Installation starts when the TV powers on for the 
fi rst time. If the TV has been turned on before, the Initial 
Installation will not be invoked. For changing the settings of 
the Initial Installation, perform "EZ setup" on the Initial Setup 
menu on page 35.
PressPOWER on the TV or on the remote control unit 
again to turn the power off.
•  The TV enters...

20
Antenna & Cable/STB
Select the type of connection you will use to 
watch TV.
3 Press c/
d
 to select "Antenna & Cable" or "Set-
top box", and then press ENTER.
Set-top boxAntenna & Cable
  To watch TV via an antenna or cable 
connection (without using a set-top box):
  Select "Antenna & Cable", and then go to step 4.
  To watch TV via a set-top box:
1Select "Set-top box", and then press ENTER.
2To watch TV, select the input source 
corresponding to the terminal...

21
Completed
6  The settings confi rmation screen is displayed. Confi rm the information displayed on the screen, 
and then press  ENTER.
Examples of the settings confi  rmation screen
When one or more channel is received after 
"Antenna & Cable" was selected in step 3 and a 
search was carried out.
OK
Language : English
TV Location  : Home
Anntena & Cable/STB  : Antenna & Cable
Air/Cable : Air
Search Result   : Digital 4ch
  Analog 7ch
Press the INPUT button,then the right arrow  d,
to see the...

22
Direct Button Operation
MUTE
Mutes the current sound output.
PressMUTE .
•"" will be displayed on the screen for 30 minutes, and 
the sound is silenced.
•Within 30 minutes of pressing  MUTE, mute can be 
canceled by pressing  VOL
k/
l  or 
MUTE .
•Mute will be canceled after 30 minutes have passed. 
However, the TV will not suddenly output a loud sound as 
the volume level is set to 0 automatically.
Sleep Timer
Allows you to set a time when the TV automatically 
switches to standby....

23
AV MODE 
AV MODE gives you several viewing options to choose 
from to best match the surrounding environment of the 
TV, which can vary due to factors like room brightness, 
type of program watched or the type of image input 
from external equipment.
PressAV MODE . Current AV MODE displays.
•PressAV MODE  again before the mode displayed on the 
screen disappears. The mode changes as shown below:
Example:
When the input source is TV, COMPONENT, 
VIDEO 1 or 2
DYNAMIC
DYNAMIC (Fixed) AUTO ST
ANDARD...

24
Your TV is equipped with an internal Closed Caption 
decoder. It allows you to view conversations, narration 
and sound effects as subtitles on your TV. Closed 
Captions are available on some TV programs and on 
some VHS home video tapes at the discretion of the 
program provider.
Digital Closed Caption service is a new caption service 
available only on digital TV programs (also at the 
discretion of the service provider). It is a more fl exible 
system than the original Closed Caption system,...

25
Direct Button Operation
VIEW MODE
You can select the screen size.
1 Press VIEW MODE.
•The View Mode menu displays.•The menu lists the View Mode options selectable for the type of video signal currently 
being received.
2 Press VIEW MODE or 
a/
b while the View Mode menu is displayed to select a 
desired item on the menu.
•  You can sequentially select a View Mode that has its own aspect ratio.
•You can have the same settings by choosing "View Mode" on the menu items. (See page 32.)•You may not...

26
1Guide display• This indicates the buttons that can be operated on the 
displayed screen. The guide display varies depending 
on the menu setting screen.
•
The operations for some selected items may be displayed 
in the operational guide bar at the bottom of the screen.
2Item displayed in blue•  This indicates the item currently selected.
•PressENTER to go to the adjustment screen for this item.
3 Item in brackets•  This indicates the current setting for the item.
4 Item displayed in white•  This...

27
On-Screen Display Menu
Menu Items
System Options
View Option .................. Pages 32-33, 52, 55
APPS .................................... Page  32
USB Operation Panel ............ Page 52
Home Network (DLNA) 
Operation Panel .................... Page 55
View Mode ............................ Page 32
Freeze ................................... Page  32
Change Audio ....................... Page 32
Change CC ........................... Page 33
3D Setup ......................................... Page...

28
On-Screen Display Menu
AV MODE (Changing Pic.Quality)
The audio and video settings can be changed to suit 
the program or input content being watched.
Select from the following AV modes.
■
When the input source is TV, COMPONENT, VIDEO 1 or 2:
AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/
DYNAMIC(Fixed)
■When the input source is PC IN or HDMI 1 to 4:AUTO/STANDARD/MOVIE/GAME/PC/USER/x.v.Color/
DYNAMIC/DYNAMIC(Fixed)
•  The selectable items vary depending on the input source.
•  For details of the selectable...