Sharp Lc 40le600 Operation Manual

19
Audio
Audio Description
Available only when you set “Audio Description” in the 
“Type” menu above.
Item
SpeakerWhen set to “On”, audio for the visually 
impaired is output from the TV speakers.
HeadphoneWhen set to “On”, audio for the visually 
impaired is output from the headphone 
terminal.
VolumeAdjust the volume of the speakers or 
headphones.
Setting audio input
Option
PC Audio Select
When using the EXT 4 terminal or HDMI 2 terminal, you 
must select which terminal uses the AUDIO (R/L) jack for...

20
Power Save Settings
ECO
Energy Save [Standard][On]
No Signal Off ECO picture control
[Disable]
No Operation Off [Disable]
ECO
ECO picture control
This function automatically detects the image source and 
decreases the power consumption while keeping the 
brightness of the image unchanged.
NOTEThis function does not work when “AV MODE” is set to 
“DYNAMIC (Fixed)”.
This function does not work when “Energy Save” is set to 
“Standard” or “Advanced”.
ECO
Energy Save
This function enables you to...

21
Additional Search
Use this menu to add new channels automatically after 
auto installation has been completed.
Manual Search
Add new services within a specified channel bandwidth.
NOTEYou can search the channel bandwidth by pressing ; after 
setting the value for both “From Channel” and “To Channel” 
using c/d.
You can perform “Manual Search” with a service number only 
when the four Nordic countries (Sweden, Norway, Finland or 
Denmark) have been selected in the country setting (Page 9). 
When...

22
Password/Parental lock settings
Setup
Child Lock
Allows you to use a PIN to protect certain settings from 
being accidentally changed.
NOTEPIN input is required when executing “Child Lock”. The default 
PIN is “1234”. To clear the PIN setting (PIN input will no longer 
be needed), refer to CLEARING THE PIN (Page 24).
Change PIN
Register a four-digit password number to use the “Child 
Lock” function.
Enter the four-digit number as a PIN using 
0_9 numeric buttons.
Enter the same four-digit number as in...

23
Selecting the picture size
You can select the picture size. Selectable picture size 
varies with the type of signal received.
Item (for SD [Standard-Definition] signals)
AutoThis mode allows the TV to switch 
automatically among the different picture 
sizes.
NormalKeeps the original aspect ratio in a full 
screen display.
Zoom 14:9For 14:9 letterbox pictures. A thin side 
bar appears on each side, and you may 
also see bars on the top and bottom 
with some programmes.
PanoramaIn this mode, the picture...

24
Setting when using external 
devices
Input source settings
Setup
Input Label
You can label each input source with a custom 
description.
Press b to select the desired input source.
Go to “MENU” > “Setup” > “Input Label”.
Press a/b/c/d to select each character of 
the new name for the input source, and then 
press ;.
CLEAR
BACK
END
Repeat until the label is fully spelt out.
NOTEThe label can be six characters or less.
When you want to set an input source label of less than six 
characters, select “END”...

25
Connecting a PC
HDMI Connection
PC HDMI 1, 2 or 3

HDMI-certified cable
PC HDMI 2*


DVI/HDMI cableø 3.5 mm stereo 
minijack cable
When using the HDMI 2 terminal, you must select the proper 
item in the “PC Audio Select” menu depending on the type of 
HDMI cable connected (Refer to page 19 for details).
Analogue Connection
PC EXT 4*


RGB cableø 3.5 mm stereo 
minijack cable
PC EXT 4*


DVI/RGB conversion 
cableø 3.5 mm stereo 
minijack cable
When using the EXT 4 terminal, you must...

26
RS-232C port specifications
PC Control of the TVWhen a programme is set, the TV can be controlled 
from the PC using the RS-232C terminal. The input 
signal (PC/video) can be selected, the volume can be 
adjusted and various other adjustments and settings 
can be made, enabling automatic programmed 
playing.
Use an RS-232C serial control cable (cross type) 
(commercially available) for the connections.
NOTEThis operation system should be used by a person 
who is accustomed to using PCs.
RS-232C serial...

27
PC compatibility chart
ResolutionHorizontal 
FrequencyVertical 
FrequencyAnalogue (D-
Sub)Digital (HDMI) VESA Standard
VGA 640 x 480 31.5 kHz 60 Hz
✔✔✔
SVGA 800 x 600 37.9 kHz 60 Hz
✔✔✔
XGA 1,024 x 768 48.4 kHz 60 Hz
✔✔✔
WXGA 1,280 x 768 47.7 kHz 60 Hz
✔✔
WXGA 1,360 x 768 47.7 kHz 60 Hz
✔✔✔
SXGA 1,280 x 1,024 64.0 kHz 60 Hz
✔✔
SXGA+ 1,400 x 1,050 65.3 kHz 60 Hz
✔✔
VGA, SVGA, XGA, WXGA, SXGA and SXGA+ are 
registered trademarks of International Business 
Machines Corporation.NOTEThis TV has only...

28
Troubleshooting
Problem Possible Solution
No power. •
Turn on (;) the MAIN POWER switch on the left side of the TV (Page 4).
Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press 
B.
Is the AC cord disconnected?
Check if you pressed a on the TV. •
•
•
•
The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In this 
case, operate the TV after first turning off the power, or unplugging the...