Sharp Lc 32le705 Operation Manual

29
Analogue setting
You can reconfigure the analogue TV channels settings 
automatically or manually.
Additional searchUse this menu to add new services automatically after 
“Analogue search” in the “Auto installation” menu has 
been completed.
Start searching channels after selecting the colour system and 
sound system.
Manual adjustUse this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press 
a/b/c/d to select the channel you want to 
set and then press ;.
Fine
You...

30
Password/Parental lock settings
Setup
Child lock
Allows you to use a PIN to protect certain settings from 
being accidentally changed.
NOTEPIN input is required when executing “Child lock”. The default 
PIN is “1234”. To clear the PIN setting (PIN input will no longer 
be needed), refer to CLEARING THE PIN (Page 41).
Change PIN
Register a four-digit password number to use the “Child 
lock” function.
Enter the four-digit number as a PIN using 
0_9 numeric buttons.
Enter the same four-digit number as in...

31
Selecting the picture size
Selecting the WSS picture size 
automatically
Setup
WSS
The “WSS” allows the TV to switch automatically among 
the different picture size.
NOTEUse “WIDE MODE” if an image does not switch to the 
appropriate picture size. When the broadcast signal contains no 
“WSS” information, the function will not work even if enabled.
Selecting the WSS picture size 
manually
Setup
4:3 mode
The “WSS” signal has 4:3 auto-switching that allows you 
to select between “Normal” and “Panorama”....

32
Selecting the recording picture 
size manually
Digital setup
REC picture size
You can use this menu to set the appropriate picture size 
for viewing a 16:9 format TV programme on a 4:3 TV.
Setting to “4:3 TV” Setting to “16:9 TV”
NOTE
This function must be set before recording.
Selecting the HDMI picture size 
automatically
Setup
HDMI auto view
This function allows you to automatically change to the 
appropriate picture size when viewing an HDMI signal 
using the HDMI 1, 2, 3 and 4 terminals....

33
Display settings
Channel display
You can display the channel information by pressing p 
on the remote control unit.
DTV modeATV mode
Audio (ENG) STEREO
Video
Subtitle New informationSTEREO
Subtitle New information
Four digit numbers (e.g., 0001) are displayed after selecting the 
five Nordic countries in the country setting.
Time display in channel informationYou can display the time information included in DTV and 
teletext broadcasts.
NOTESkip step 1 if receiving DTV broadcasts.
Select a TV channel...

34
Setting when using external 
devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
Item
EXT 1 Y/C, CVBS, RGB
EXT 2 Y/C, CVBS
NOTEIf no (colour) image displays, try changing to another 
signal type.
Check the operation manual of the external equipment for the 
signal type.
Setup
Input label
You can label each input source with a custom 
description.
Press b to select the desired input source.
Go to “MENU” > “Setup” > “Input label”.
Press a/b/c/d to select...

35
Connecting a USB device
Connect an USB device to the TV as shown below.
The TV automatically switches to the USB mode when a USB 
device is inserted in the USB terminal.
Depending on the USB device, the TV may not be able to 
recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on 
character set) may not be displayed.
Do not disconnect a USB device or memory card from the TV 
while transferring files, using the slide show...

36
Slide show
Selecting the BGM
File nameTime
Playing:
Slide show BGM:
Buttons for slide show BGM select operation
ButtonsDescription
; When selecting the folder icon with 
the 6 mark: Go back to the parent 
directory.
When selecting a folder icon: Enter this 
directory.
When selecting a music file: Play music.
a/b (Cursor) Select a desired item.
c (Cursor) Page up.
d (Cursor) Page down.
6 Return to the thumbnail selection 
screen.
R button Stop music.
G button Play/Pause music.
Y button Set the selected...

37
Connecting a PC
HDMI connection
PCHDMI 1, 2, 3 or 4

HDMI-certified cable
PC HDMI 2*


DVI/HDMI cableø 3.5 mm stereo 
minijack cable
When using the HDMI 2 terminal, you must select the proper 
item in the “PC audio select” menu depending on the type of 
HDMI cable connected (refer to page 25 for details).
Analogue connection
PC EXT 4*


RGB cableø 3.5 mm stereo 
minijack cable
PC EXT 4*

\b
DVI/RGB conversion 
cableø 3.5 mm stereo 
minijack cable
When using the EXT 4 terminal, you must...

38
Adjusting the PC image 
automatically
This function enables the screen to be automatically 
adjusted to its best possible condition when the analogue 
terminals of the TV and PC are connected with a 
commercially available DVI/RGB conversion cable, etc.
Setup
Auto sync.
NOTEWhen “Auto sync.” is successful, “Auto Sync completed 
successfully” displays. If not, “Auto sync.” failed.
“Auto sync.” may fail even if “Auto Sync completed 
successfully” displays.
“Auto sync.” may fail if the PC image has low...