Sharp Lc 32le705 Operation Manual

9
Initial auto installation
When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings one 
after another.
Confirm the following before turning on 
the power
Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?
E
E
E
Press a on the TV.The initial auto installation wizard appears.
Setting the OSD language.
Press a/b/c/d to select the desired language, 
and then...

10
Quick guide
Searching for cable broadcasts
To change each item to the appropriate 
settings:
Press a/b to select the menu, and then 
press ;.
Scrambled stations[Yes]
[Channel]
[None]
Search method
Start frequency
Network ID
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
Press a/b/c/d or 0_9 to select or input 
the appropriate item/value, and then press 
;.
Press a/b to select “Search start”, and then 
press ;.
The TV searches for, sorts and stores all 
the receivable...

11
Quick guide
Checking signal strength and 
channel strength (DVB-T/C)
If you install a DVB-T/C antenna for the first time or 
relocate it, you should adjust the alignment of the 
antenna to receive a good reception while checking the 
antenna setup screen.
Go to “MENU” > “Setup” > “Antenna setup-
DIGITAL”.
Checking signal strength
Press a/b to select “Signal strength”, and 
then press ;.
Supply voltageCH no.
CurrentMax.
Signal strengthSignal strength
Channel strength
CurrentMax.
Quality
Checking...

12
Daily operation
Switching on/off
Turning on/off the power
Turn on (;) the MAIN POWER switch on the 
left side of the TV (Page 4).
Press a on the TV.
Switch it off by pressing a on the TV.
When turning off the power using a on the TV, EPG data 
will be lost.
Standby mode
To standby modeIf the TV is switched on, you can switch it to standby by 
pressing B on the remote control unit.
Switching on from standbyFrom standby, press B on the remote control unit.
TV indicator status
B (Standby/On indicator)...

13
Watching TV
EPG
EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/
DATA, view detailed information about them, tune to an event currently on-air.
Useful settings for using EPG
Basic operation
Press @ and the “MENU” screen 
displays.
Press c/d to select “Digital setup”.
Press a/b to select “EPG setup”, and then 
press ;.
Digital setup
REC picture size[16:9 TV]
Download setup [Yes]
EPG setup
Subtitle
CI menu
Press a/b to select the desired...

14
Selecting a programme using EPG
Basic operation
The illustrations on this page are explained 
using three digit services.
Display/Close the EPG 
screen
Press EPG.
E
SelectEnterBackExit
AMPM
Programme info. Search by genre Search by date
Select a programmeSelect the time span
Press c/d to select the time span you want 
to search.
Continue to press d to display programmes in the next 
time span.
E
1
•
Select the desired programme
Press a/b to select the desired programme.If a or b are displayed on the...

15
Teletext
What is teletext?Teletext broadcasts pages of information and 
entertainment to specially equipped TV. Your TV receives 
teletext signals broadcast by a TV network, and decodes 
them into graphical format for viewing. News, weather 
and sports information, stock exchange prices and 
programme previews are among the many services 
available.
Turning teletext on/off
Select a TV channel or external source 
providing a teletext programme.
Press m to display the teletext.
Many stations use the TOP...

16Before connecting ...
Be sure to turn off the TV and any devices before making any connections.
Firmly connect a cable to a terminal or terminals.
Carefully read the operation manual of each external device for possible connection types. This also helps you get the be\
st possible 
audiovisual quality to maximise the potential of the TV and the connecte\
d device.
Refer to page 37 for connecting a PC to the TV.
NOTEThe cables illustrated in pages 16_18 are commercially available items.
Video...

17
SCART connection
Example of connectable devicesDecoder
E

Decoder
SCART cable

Example of connectable devicesVCR
DVD player/recorder
E
E
If your VCR supports TV-VCR advanced AV Link 
systems, you can connect the VCR using a fully wired 
SCART cable.


VCR Decoder
SCART cable

NOTEIn cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder 
is connected in “Manual adjust” in the “Analogue setting” me\
nu (Page 29).
TV-VCR...

18
YPB
(CB)PR
(CR)Component connection
Example of connectable devicesVCR
DVD player/recorder
E
E
You will enjoy accurate colour reproduction and high 
quality images through the EXT 3 terminal when 
connecting a DVD player/recorder or other device.
YPB(CB)
L
RPR(CR)COMPONENT
AUDIO
 
Audio cableComponent cable
VIDEO connection
Example of connectable devicesVCR
DVD player/recorder
Game console
Camcorder
E
E
E
E
You can use the EXT 9 terminal when connecting to a 
game console, camcorder, a DVD...