Sharp Lc 24le510 Operation Manual

Basic adjustment
Audio settings
When the Sound Mode is set to “User”, the sound 
can be adjusted according to your preferences. See the 
following setting table.
Adjustments options
Selected 
setting◄ Button► Button 
TrebleReduce trebles Increase trebles 
BassReduce bass Increase bass
BalanceIncrease audio from 
the left speakerIncrease audio from 
the right speaker
Auto
VolumeOff On
Surround 
SoundOff On
SPDIF 
Mode(PCM) Activates 
digital audio output Dolby Digital
●  Sound Mode
Select your desired...

Basic adjustment
Channel settings
Channel
Channel adjustments
Allows to reconfigure the channels after initial auto 
installation has been completed.
● ● Auto Tuning
This function allows you to select the country and 
automatically adjusts the channels for digital, cable  or 
analogue individually.
● ● DTV Manual Tuning
Allows you to tune digital channels manually. 
●  CADTV Manual Tuning (Only Lx220 series)
Allows you to add new cable services manually.
This setting appears after searching for cable...

●  OSD Language
 Allows you to select the screens language.
● Audio Languages
 Allows you to select the audio language.
● Subtitle Language
 Allows you to select the subtitles language.
● Hearing Impaired
 This function allows you to activate or deactivate the 
subtitles for the hearing impaired. These subtitles have 
priority.
NOTE
 
Subtitles will not be displayed when the service does not 
contain subtitle information.
●  USB REC and TimeShift setup
Allows to select modes, disk, disk setup and speed...

You can display the channel information that you are 
watching at this moment by pressing p on the remote 
control unit.
Information that appears on the screen:
 Program number
 Program name
 Channel information
 Language
 Teletext
Information about the program which is 
being broadcast
Channel list
Selecting the channel 
you want to watch 
Channel information display 
(DTV/CADTV only)
1 Press OK and the list of tuned channels will be 
displayed. 
2 Use ▲/▼ to select the channel you want to watch...

 
For selecting the input type of external equipment.
• If no (colour) image is displayed, try changing to 
another signal type.
• Check the operations manual of the external equipment 
for the signal type.
Connect an USB device to the TV as shown below.
• Depending on the USB device, the TV may not be 
able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending 
on character set) may not be displayed.
• Do not disconnect...

Buttons for full screen display operation
Viewing photos on full screen
ButtonsDescription
▲/▼ Cursor Go to the previous/next photo in the 
same directory..
◄/► Cursor Select / unselect the photos you want 
to see.
END button Go back to the previous screen.
 f button  Zoom: 
▲/▼/◄/►  allow to move through 
the pictures when zoom is activated.
 A button Rotates 90º the photo on screen.
Reproduces MP3 music files.
1 Select MUSIC mode and press OK.
2 
Select the files you want to reproduce with  ▲/▼ / ◄/►...

USB device compatibility
USB 2.0 
device USB Memory, USB card reader, HDD 
(Mass Storage class)
File systemFAT / FAT32 / NTFS
Photo file 
formatJPEG (*.JPE, *.JPG), BMP, PNG
Music file 
formatMPEG1 (*.MP3), AAC / HE AAC (*.AAC, 
*.M4A), PCM (*.WAV)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz 
Video file 
formatMPEG1/2 (*.MPG, *.MPE, *.MPEG, 
*.VOB, *.DAT, *.TS, *.TRP), MPEG4 (*.AVI, 
*.MOV, *.MP4, *.MKV), H.264 (*.AVI,...

Useful viewing functions
USB REC and TimeShift functions 
TimeShift
TimeShift function allows you to record the current 
digital TV programme and watch it later, always before 
turning off the TV set.
USB REC (Video Recorder)
USB REC function allows you to record a TV programme 
and watch it later. Also allows you to temporize one or 
more recording and they will be available for a later on 
view. 
These recordings will not be lost when the TV is turned off.
TimeShift and USB REC require an external USB...

USB REC operation
• Thimehift has not been created as a real recording 
method, so the recorded data will be deleted each time 
you cancel it, change programme or input source, or 
switch off the TV. The recorded data will never be available 
for any external device.
• During TimeShift mode, p, “EPG” and m show live 
broadcast information, not recorded one.
• Keeping “ALWAYS” mode as a permanent option may 
shorten the life of the external USB memory.
• Programmes which require a PIN to watch them cannot...

2. All the fi nished recordings are available on the 
“USB REC Recorded List” in the TIME menu, or 
they are also accessible by pressing REC LIST key 
on the remote control. 
3.  The TV set can start a timer recording while is in 
standby mode. When the recording starts in this 
mode, the status indicator (AQUOS pyramid) will 
change from red to violet.
NOTES: 
•  If you try to switch off the TV ( B)  during a USB recording, 
an on screen menu will appear where you can decide to 
switch off completely or...