Sharp Lc 24le510 Operation Manual

							Basic adjustment
Audio settings
When the Sound Mode is set to “User”, the sound 
can be adjusted according to your preferences. See the 
following setting table.
Adjustments options
Selected 
setting◄ Button► Button 
TrebleReduce trebles Increase trebles 
BassReduce bass Increase bass
BalanceIncrease audio from 
the left speakerIncrease audio from 
the right speaker
Auto
VolumeOff On
Surround 
SoundOff On
SPDIF 
Mode(PCM) Activates 
digital audio output Dolby Digital
●  Sound Mode
Select your desired setting. The available options 
are:  
S
TANDARD→MUSIC→MOVIE→SPORTS→USER6
●  Auto Volume
Reduces sudden volume changes, for     example, 
during commercials or when switching from one 
channel to another.
● ●  Surround Sound
This function allows you to enjoy surround sound.
 
● ●  SPDIF Mode
Digital audio output.
Picture settings
When the Picture Mode is set to “User”, the picture 
can be adjusted according to your preferences. See the 
following setting table.
Adjustments options
Selected 
setting◄ Button► Button 
BacklightThe screen dimsThe screen
 brightens
ContrastContrast goes down Contrast goes up
BrightnessBrightness goes 
downBrightness goes up
ColourColour intensity 
goes downColour intensity 
goes up
SharpnessSoften details Emphasize details
TintSkin tones become 
purplishSkin tones become 
greenish
Colour 
TemperatureReddish white Bluish white
Aspect 
RatioChanges between different picture sizes
Noise 
Reduction
*
Improves picture quality 
(choose among different options)
Screen**See Adjusting the PC image manually 
on page 17
*  This function may be not available in some types of input 
signal.
** Only available in PC mode.
●  Picture Mode
Select your desired setting. The available options 
are:  
STANDARD → SOFT → ECO → USER → DYNAMIC 6
Picture adjustments
PictureSound
Sound adjustments
PICTURE
Picture mode                                         User
Backlight                                                           50
Contrast                          50
Brightness       50
Colour       50
Sharpness       60
END MENU OK
 19
 
						

							Basic adjustment
Channel settings
Channel
Channel adjustments
Allows to reconfigure the channels after initial auto 
installation has been completed.
● ● Auto Tuning
This function allows you to select the country and 
automatically adjusts the channels for digital, cable  or 
analogue individually.
● ● DTV Manual Tuning
Allows you to tune digital channels manually. 
●  CADTV Manual Tuning (Only Lx220 series)
Allows you to add new cable services manually.
This setting appears after searching for cable broadcasts.
●  ATV Manual Tuning
Allows you to tune in analogue channels manually. 
● Programme Edit
Allows you to delete channels, to skip channels and to 
set up a favourite channels list.
Select the channel you want to reorganize and press 
the RED button to delete it, the BLUE button to skip it 
(to ignore it), YELLOW button to move it, FAV to mark 
it as favourite or GREEN button to rename it (only in 
ATV mode.)
NOTE
If you press FAV when you are not in any adjustment menu, 
the favourite channel list will appear. 
● ● Signal Information
Show the signal power and quality.
● ● CI Information
Allows to see the CA card information (Conditional 
Access Module): name, supplier and OSD.
Install channels
Time settings
Searching for cable broadcasts 
(Only Lx220 series)
Allows you to add cable services.
1 Press ▼ key to select
Auto Tuning and press OK.2 With ▲/▼/◄/► keys select Tune type and CADTV. 
Go to Start and press OK.
3 In Scan type choose between Full search or 
Network.
Full: The TV searches for, sorts and stores all the 
receivable TV stations according to their settings 
and the connected antenna for any network.
Network:  Add new services within a specified 
network identification.
If you choose Network, you can do an automatic 
search (Auto) or may introduce the next parameters:
Frequency:  start frequency searching.
Network ID: 
select a provider (Network  
identification number.)
Symbol(ks/s): symbol rate of signal cable.  
NOTE:
The value of “Frequency”, “Network ID” and 
“Symbol(ks/s)” should be set to the value specified by the 
cable provider.
 
4  
With ▲/▼ go to “OK” and press OK to start searching 
cable broadcasts.
 20
 
						

							●  OSD Language
 Allows you to select the screens language.
● Audio Languages
 Allows you to select the audio language.
● Subtitle Language
 Allows you to select the subtitles language.
● Hearing Impaired
 This function allows you to activate or deactivate the 
subtitles for the hearing impaired. These subtitles have 
priority.
NOTE
 
Subtitles will not be displayed when the service does not 
contain subtitle information.
●  USB REC and TimeShift setup
Allows to select modes, disk, disk setup and speed 
test for TimeShift function. Also allows you to see the 
disk space reserved for USB REC.
See the operation on page 26.
● Restore factory default
 Recover the configuration that the TV had when it left 
the factory.
● Software Update (USB)
 This option allows you to have the TV software version 
always updated.
1 Add the binary file to USB memory root. 
2 Insert the memory in the TV USB socket.
3 Press  MENU  on  the  remote  control  unit  and 
select OPTION.
4 Press ▼ until Software Update (USB) option
appears.
• Press OK. Are you sure? message is displayed.
• Select Ye s with ◄/► and press OK. The software 
update will start.
•The updated percentage appears. The TV will 
restart automatically when the process arrives at 
100%. 
5 Return to OPTION menu to check that the version 
has been updated successfully.
Basic adjustment
Options
Options menu
This adjustment allows you to set or to display the 
following functions: Clock, Off / On Timer and Sleep 
Timer.
● ● Clock
This function allows you to display the clock information 
(day / month / hour/ minute). The time and the date 
can’t be modified in this option. 
● ● Off Timer
Allows you to set a time when the TV automatically 
enters in standby mode.
● ● On Timer
Allows you to set the time when the TV must switch 
on.
● Sleep Timer
Allows you to setup the automatic Switch Off for: 
10min., 20min., 30min., 60min., 90min., 120min., 
180min. and 240 min..
NOTE
• Select “Off” to cancel the sleep timer.
• 
When  the   time   has  been  set,  countdown  starts 
automatically.
• The last minute is displayed second to second.
● ● No Operation Off
Switches the TV off when no key is pressed for 3 
hours.
● ● No Signal Off
When this function is activated the TV automatically 
enter standby mode if there is no signal input during 
10 minutes.
In PC mode, when there is no signal input, the TV 
goes into standby mode for 15 seconds. 
● ● Time Zone
Allows you to setup the time zone.
● ● Summer time
Allows you to change automatically to summer time 
(auto, off, on.)
● ● USB REC Manual Temporization
Allows you to schedule the program recorder.
● ● USB REC Programmed Recording List
Allows you to visualize all scheduled recordings.
● ● USB REC Recorded List
Allows you to see the recorded program list.
Time
Time adjustments
Option settings
 21
 
						

							You can display the channel information that you are 
watching at this moment by pressing p on the remote 
control unit.
Information that appears on the screen:
 Program number
 Program name
 Channel information
 Language
 Teletext
Information about the program which is 
being broadcast
Channel list
Selecting the channel 
you want to watch 
Channel information display 
(DTV/CADTV only)
1 Press OK and the list of tuned channels will be 
displayed. 
2 Use ▲/▼ to select the channel you want to watch 
and press OK.





Basic adjustment
CLEARING THE PIN
If you lose or forget your PIN, you can clear the PIN 
following these steps:
1 Go to «MENU»→«LOCK»→«PASSWORD».
2 Enter “3001” to cancel out the current PIN.
The current PIN is reset to “1234”.
This function allows you to use a password to lock 
certain programs and adjustments.
The password is always needed to access to this 
menu ( by default, the password is 1234.)
● Set password
 Allows you to change the password. Press OK, enter 
the new password and confirm.
● Block program
The password is needed before locking one 
program.
1 Select the program or programs you want to lock 
and press GREEN button. A padlock appears next 
to the locked channel in the channel list.  
2 Press End to exit.
This option enters your selection in a locked channels 
list. 
NOTE
• To prevent the channel search, when one program is locked, 
the channel menu is locked too.
• To view a locked channel, you must enter the password. 
When you select a locked channel a password prompt 
message pops up.
• You must repeat the previous steps to unlock one locked 
program.
● Parental Guidance
This function allows you to restrict DTV/CADTV 
programs depending on the age classification.
The information about classification is provided by the 
broadcasting station. 
Lock settings
Lock programs
Lock 
● ● DivX® registration code (VOD)
This TV allows play video on demand (DivX
® VOD). 
To activate this option you need to register the TV at 
www.divx.com/vod, download  the VOD log file and 
reproduce it in TV.
●  Deactivation code DivX® (VOD)
Displays the deactivation code necessary to write off 
this TV at www.divx.com/vod.
 22
 
						

							 
For selecting the input type of external equipment.
• If no (colour) image is displayed, try changing to 
another signal type.
• Check the operations manual of the external equipment 
for the signal type.
Connect an USB device to the TV as shown below.
• Depending on the USB device, the TV may not be 
able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending 
on character set) may not be displayed.
• Do not disconnect a USB device or memory card from 
the TV while transferring files, using the slide show 
function, when a screen is switching to another or 
before you exit “MEDIA PLAYER” from the “INPUT 
SOURCE” menu.
• Compatibility with USB hard disc connection.
• Do not connect and disconnect a USB device from 
the TV repeatedly.
Useful viewing functions 
Input source settings
Setting when using external 
devices
Connecting a USB device
(Media Player)
Selecting the picture 
format manually
You can select the picture format. The selected picture 
format varies depending on the type of signal received.
1 Press f on the remote control unit to change 
between different kinds of pictures. 
NOTE
Some items do not appear depending on the type of received 
signal.
Normal 4:3 : Keeps the original aspect ratio in a full 
screen display.
Zoom 14:9 : For 14:9 letterbox pictures. A thin side 
bar appears on each side, and you may also see 
bars on the top and bottom with some programs.
Panorama: In this mode, picture is stretched toward 
each side of the screen. The picture may appear 
similar to “Full” depending on broadcast signals.
Full: For 16:9 squeeze pictures.
Cinema 16:9: For 16:9 letterbox pictures. Bars 
may appear on the top and bottom with some 
programs.
Cinema 14:9: For 14:9 letterbox pictures. Bars 
may appear on the top and bottom with some 
programs.
Auto: The TV selects the picture size automatically.
Selecting the picture format
Full: Overscan image. Cuts out all sides of the 
picture.
Underscan: Displays a high definition picture 
adjusted perfectly. Picture noise may appear on 
the sides of picture with some programs. 
Auto: this mode allows the TV to change between 
different picture sizes automatically.
Sizes for SD Signal (Standard Definition)
Sizes for HD Signal (High Definition) HDMI
 23
 
						

							Buttons for full screen display operation
Viewing photos on full screen
ButtonsDescription
▲/▼ Cursor Go to the previous/next photo in the 
same directory..
◄/► Cursor Select / unselect the photos you want 
to see.
END button Go back to the previous screen.
 f button  Zoom: 
▲/▼/◄/►  allow to move through 
the pictures when zoom is activated.
 A button Rotates 90º the photo on screen.
Reproduces MP3 music files.
1 Select MUSIC mode and press OK.
2 
Select the files you want to reproduce with  ▲/▼ / ◄/► 
buttons and press OK to start the reproduction.
3 Press OK to stop the reproduction of MP3 files and  press END to exit the MUSIC mode.
• You can stop/restart the reproduction pressing OK.
Buttons Description
▲/▼ Cursor Go to the previous/next track in the same 
directory.
◄/► Cursor
•Mark with X the tracks you want to play  (on MUSIC MENU)
•Backward / Fast forward ( on reproduction  mode)
END button Go back to the previous screen.
RED button   
Options: 
Reproduce the selected files 
indefinitely.
Reproduce the folder files only once.  When the reproduction has finished, go 
back to the previous screen.
(cReproduce all the files on the folder  indefinitely.
MUSIC mode
Buttons for music reproduction
Useful viewing functions
After selecting Media Player, the TV loads USB device 
files, and shows the following screen:
1 Pressing ◄/►  buttons you can change between 
different modes: PHOTO,  MUSIC, MOVIE or TEXT.
Press  OK to select the option you want to reproduce.
2 Press  ▲/▼/◄/►  to select the folder where you 
want to search the files and then press OK.
MEDIA PLAYER function
PHOTO mode
You can reproduce photos with JPEG (*.JPE, *.JPG), 
BMP and PNG format on your TV.
Several kinds of reproduction are possible.
1 Select PHOTO mode and press OK.
2 Select the file you want to display on full screen  with  ▲/▼ / ◄/► buttons and press OK to start the 
viewing.
 24
 
						

							USB device compatibility
USB 2.0 
device USB Memory, USB card reader, HDD 
(Mass Storage class)
File systemFAT / FAT32 / NTFS
Photo file 
formatJPEG (*.JPE, *.JPG), BMP, PNG
Music file 
formatMPEG1 (*.MP3), AAC / HE AAC (*.AAC, 
*.M4A), PCM (*.WAV)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz 
Video file 
formatMPEG1/2 (*.MPG, *.MPE, *.MPEG, 
*.VOB, *.DAT, *.TS, *.TRP), MPEG4 (*.AVI, 
*.MOV, *.MP4, *.MKV), H.264 (*.AVI, *.TS, 
*.TRP, *.MOV, *.MP4, *.MKV), DivX® 
(*.DIVX, *.AVI, *.MP4), XviD (*.AVI, *.MKV)
Text file 
formatTXT (*.TXT, *.SRT, *.SSA)
NOTE
•  Progressive format jpeg files are not supported.
•  Music files in USB 1.1 devices may not be played properly.
•  Operation using USB hubs is not guaranteed.
•  The external hard disc with capacity exceeding 1TB cannot 
be detected correctly.
•  Cables used to prolong the USB device must be certified as 
USB 2.0.
•  In USB devices, video files may not be played properly if 
speed is not enough.
•  Play non-standard  encoded files is not guaranteed.
Power save settings
This function enables you to automatically reduce the 
backlight brightness in order to decrease the power 
consumption and increase the backlight life span.
In menu PICTURE → Picture Mode select the ECO 
setting.
Useful viewing functions
MOVIE mode
Reproduces films and videos.
1 Select MOVIE mode and press OK.
2 Select the files you want to reproduce with ▲/▼ /◄/► 
buttons and press OK to start the reproduction.
• If there is only one file, the reproduction will start automatically 
when this file is selected. 
3 Press OK to stop / restart the reproduction.
4 Press END to exit the MOVIE mode.
TEXT mode
Displays text files.
1 Select TEXT mode and press OK.
2 Select the file you want to display with ▲/▼ /◄/► 
buttons and press OK. The selected file will appear 
on full screen.
3 You can move up and down in the file with ▲/▼/◄/► 
buttons.
4 You can display the previous or next text file with 
◄/► buttons.
5 Press END to exit the TEXT mode.
Buttons Description
▲/▼ Cursor
Go to the previous/next file in the same 
directory (on MOVIE MENU)
◄/► Cursor
• Mark with X the files you want to play.
• Backward / Fast forward 
   (on reproduction mode)
END button
Go back to the previous screen.
RED button  
-Movie Menu options:
 Only reproduces the selected file.
 Reproduce the folder files only once. 
When the reproduction has finished, go 
back to the previous screen. 
(c
Reproduce the folder files indefinitely.
-On reproduction mode
:
 Allows you to repeat a fragment of a 
film indefinitely. The first keystroke defines 
A (initial point), the second keystroke 
defines B (final point). The third keystroke 
restarts the normal reproduction.
BLUE  button     
         yAllows you to backward or forward until a 
point in the movie.
Introduce “hh:mm:ss” and press OK. 
Buttons for film reproduction
AB
 25
 
						

							Useful viewing functions
USB REC and TimeShift functions 
TimeShift
TimeShift function allows you to record the current 
digital TV programme and watch it later, always before 
turning off the TV set.
USB REC (Video Recorder)
USB REC function allows you to record a TV programme 
and watch it later. Also allows you to temporize one or 
more recording and they will be available for a later on 
view. 
These recordings will not be lost when the TV is turned off.
TimeShift and USB REC require an external USB 2.0 
memory, always connected and previously configured 
to record the information. 
The USB 2.0 memory must be formatted before 
first use for TimeShift and USB REC function.
● TimeShift Start mode
Change between Manual and Always mode. 
Manual: The recording starts when user decides.
Always: The recording starts automatically each time 
that a digital programme is selected.
To confirm the change of mode is necessary press END 
button to exit of this menu, and then enter again in the 
“USB REC and TimeShift setup” menu.
● ● Select disk
Only available in case that there are more than one 
partition in the external USB memory (Choose between 
C:, D:, etc.).
● ● Disk setup
You can choose the size of USB device which will be 
used for TimeShift and USB REC functions, in 1GByte 
fractions. The USB device will be formatted.
ATTENTION: 
• All the data in this device will be lost.
• In case that you have a USB device with partitions, all 
the data in the selected partition will be lost.
● ● Speed test
Allows to see the compatibility grade between USB 
memory and the TV set. 
● ● USB REC free space
Allows to see the free disk space for USB REC function.
● ● Manual mode
The recording starts when user decides.
1. Press 
/ to start recording the current programme. 
The picture remains frozen and the TV set shows 
F symbol on screen.
2. Press 
/ to resume the recorded broadcast. The 
TV set continues recording the broadcast while you 
are watching the recorded programme. The TV set 
shows 
I symbol on screen.
3. Press 
V key to fast forward. By pressing V key 
repeatedly, allows you to select the fast forward 
speed. Press 
/ to restore the normal speed.
4. Press 
S key to rewind. By pressing S key 
repeatedly, allows you to select the rewind speed. 
Press 
/ to restore the normal speed.
5. To cancel TimeShift mode press ”END”, change 
TV programme or input source, or switch-off the 
TV set.
While TimeShift is activated, 
I or F symbols, or the 
recording progress bar may be displayed.
The bar shows Start, Play and Live markers, and the 
maximum recording time. 
● ● Always mode
The recording starts automatically each time that a 
digital TV programme is selected.
1. Press 
S to rewind until the desired point.
2. Press  
/ to  resume  or pause  the  recorded 
broadcast. This action does not interrupt the real 
time TV programme recording.
3. Press “END” to return to real time broadcast, 
without losing any data. The recording process will 
continue activated.
4. By changing the TV programme the TimeShift 
function will be reset (all the previous data will be 
lost), and will return to real time broadcast. The 
recording process will continue activated. 
In this mode, after the user selects any of the TimeShift 
available functions (fast forward, rewind, play, pause, 
etc…), the “
I” or “F” symbols, or the recording 
progress bar can be displayed.
NOTES:
• 
The TimeShift function does not work for ATV channels or 
external inputs. 
• With TimeShift activated only will be available video, 
audio and subtitles services.
• If during TimeShift the maximum capacity of USB is 
exceeded, the oldest data will be lost.
• It can appear displaying troubles during rewind or 
fast forward modes, depending on the USB memory 
characteristics.
  I                                                                           26 Min •••••••••••••••••   hh:mm:ss
Live hh:mm:ss
Play hh:mm:ss 
TimeShift operation
NOTES:
• 
The file system of USB device must be FAT/FAT32. If the 
device has other system, the TV set does not recognize it.
• The minimum USB 2.0 memory size to use with TimeShift 
function is 1GByte.
• As a concept, TimeShift can record up to 26 minutes on 
SD DTV/CADTV broadcasts and 7 minutes on HD DTV/
CADTV broadcasts, for every GByte.
 26
 
						

							USB REC operation
• Thimehift has not been created as a real recording 
method, so the recorded data will be deleted each time 
you cancel it, change programme or input source, or 
switch off the TV. The recorded data will never be available 
for any external device.
• During TimeShift mode, p, “EPG” and m show live 
broadcast information, not recorded one.
• Keeping “ALWAYS” mode as a permanent option may 
shorten the life of the external USB memory.
• Programmes which require a PIN to watch them cannot be 
recorded with TimeShift function until you enter the PIN. 
USB REC can activate immediately recording by using 
REC on the remote control, or with a timer using data 
taken from EPG or programming an event manually. To 
use either method follow the instructions below:
● ● Immediate recording:
The recording starts when user decides:
  1Press REC on the remote control to start recording 
the current programme. REC symbol appears in 
the bottom left corner of the screen.
  2To stop recording the current programme, press 
END twice, change TV programme or input source, 
or switch- off the TV set.
  3Press 
/ to playback the programme being 
recorded. The TV set continues recording the 
broadcast while you are watching the recorded 
programme. The TV set shows 
I symbol on the 
screen. 
  4Press 
/ during playback to pause. The TV shows 
the symbol 
F on the screen.
  5Press 
V playback to fast forward. By pressing 
V key repeatedly, allows you to select the fast 
forward. By pressing 
L key the recording fast 
forwards in intervals of fi ve minutes. Press / to 
restore the normal speed.
  6Press 
S during playback to rewind. By pressing 
S key repeatedly, allows you to select the rewind 
speed. By pressing 
T key the recording rewinds 
in intervals of five minutes. Press / to restore the 
normal speed.
  7Press END during playback mode to stop the 
playback and return to recording mode of current 
programme. The TV set continues recording and 
the REC symbol is shown on the screen.
While the recording is activated the REC symbol, the 
recording progress bar or playback progress bar will be 
displayed.
The bar shows the recording start time, current time 
and expected end, and the remaining recording time.
                                                                                 ••••••••••••••••••••••••••••••••••••••••••••••••••••   hh:mm:ssREChh:mm:sshh:mm:ss
[hhhh:mm:ss]
● ● Recording with timer
It can be programmed a recording by using two 
methods. Using the programme guide (EPG) or manually 
with the option “USB REC Manual Temporization” 
on the menu TIME.
  1Programming a timer with the EPG
1. Press EPG to select the programme you want to 
record. Then press REC.
2.  Set up the recording parameters (auto, once, every 
day or weekly) and press OK to confi rm.
  2Programming with “USB REC Manual 
Temporization”.
1. To activate a timer recording use the menu 
option TIME and the option USB REC Manual 
Temporization.
2.  Set up the desired recording parameters (channel, 
mode, date, start time and end) and press OK.
● ● Recordings and timings
1. The timings will be stored in the USB REC 
Programmed Recording List in the TIME 
menu, pending to be executed.
Useful viewing functions
Recordings and timings 
 27
 
						

							2. All the fi nished recordings are available on the 
“USB REC Recorded List” in the TIME menu, or 
they are also accessible by pressing REC LIST key 
on the remote control. 
3.  The TV set can start a timer recording while is in 
standby mode. When the recording starts in this 
mode, the status indicator (AQUOS pyramid) will 
change from red to violet.
NOTES: 
•  If you try to switch off the TV ( B)  during a USB recording, 
an on screen menu will appear where you can decide to 
switch off completely or continue with the recording until 
the maximum capacity of the USB device is reached. If 
you choose to continue with the recording, the TV will 
switch off, but continue to show the pyramide icon lit in 
purple.
4.  The timer recordings are not possible when the TV 
set is off, this is when the status indicator (AQUOS 
pyramid) is not lit. 
Useful viewing functions
● ● Deleting recordings
To delete non desired recordings stored in USB device, 
follow the instructions below:
1. Press REC LIST on the remote control.
2. Select the recording you want delete.
3. Press RED button on the remote control. 
The deletion process is irreversible and causes 
permanent loss of the recording. 
NOTES:
•  The USB REC recording function does not work for ATV  channels or external inputs.
•  It can appear displaying troubles during rewind or  fast forward modes, depending on the USB memory 
characteristics.
•  The recorded data will be never available for any external  device (computer) or in other TV even if it is the same 
model. The recordings only can be displayed in the same 
TV in which they were made.
•  Programmes wich require a PIN to watch them cannot be  recorded until you enter the PIN.
•  While TimeShift is activated, USB REC will be  disconnected. It is recommended  to enable immediate 
recording (REC) instead of TimeShift 
/, if you are 
not sure when you are going to watch the recorded 
programme.
Remember: with TimeShift function all the data will 
be lost when switch-off the TV set. 
Abbreviation list
Abbreviated term Stands for
AT V
Analogue TV
CEC Consumer Electronics Control
DNR Digital Noise Reduction
DTV Digital TV
CADTV Cable Digital TV
DVB-T Digital Video Broadcasting-Terrestrial
DVB-C Digital Video Broadcasting-Cable
DVI Digital Visual Interface
EPG Electronic Pogramme Guide
HDCP High-bandwidth Digital Content Protection
HDMI High-Definition Multimedia Interface
MHEG Multimedia and Hypermedia Expert Group
OSD On Screen Display
PCM Pulse Code Modulation
USB Universal Serial Bus
WSS Wide Screen Signalling
 28