Sharp Lc 20sd5e Operation Manual

							
GB -9

DTV menu operations
Fav (Favourite)
Assign services to four different favourite groups.
Press ▲/▼ to select the desired service.
2Press  on the remote control. A selection box 
displays.
3Press ▲/▼ to register the selected service to any 
of the four favourite groups (None, Fav1 ... Fav4) 
and then press OK. An icon displays indicating 
the favourite status.
S.No Service Name Fav   Lock  Skip Del   Move  
1. Fav  2. Lock3. Skip  4. Go To5. Delete  6. Rename7. Move   8. Move ToOK.  View
Channel Organizer                                         TV
NoneFav1Fav2Fav3Fav4  
002  BBC News004  BBC ONE005  BBC TWO006  BBC THREE008  CBBC  
0..9NavigateRADIOENDOKD.MENU
4Press DTV MENU.
5Now you can easily select your favourite service 
from the Channel List. (See page 25.)
NOTEYou cannot register the same service to two different favourite groups.
Lock
When the service is locked, you must enter your PIN 
whenever you tune to the service.
Press ▲/▼ to select the desired service.
2Press 2 on the remote control.
If you already set the PIN, enter it here. If not, 
enter the factory preset PIN “0000”.
An icon displays indicating the service is locked.Pressing 2 will turn the lock icon on and off. (PIN entry is required.)•
3Press DTV MENU.
NOTESee page 22 for setting the PIN.
•
•
Skip
Services that are set to skip will not be picked up 
when pressing P (/).
Press ▲/▼ to select the desired service.
2Press 3 on the remote control. An icon displays 
indicating the service to be skipped.Pressing 3 will turn the skip icon on and off.•
3Press DTV MENU.
NOTETo view services that are set to be skipped, use 0 - 9 numeric buttons or select from the Channel List.
Go To
Use this function to jump to the specific service 
in one step. This is useful when there are many 
services displayed on screen to scroll through.
Press 4 on the remote control. Now you can 
change the service number on the left side of the 
screen.
2Enter the number using 0 - 9 numeric buttons, 
and then press OK. The highlight moves to the 
selected service.
Delete
Delete the selected service(s) from the memory. 
Press ▲/▼ to select the desired service.
2Press 5 on the remote control. An icon displays 
indicating the service to be deleted.Pressing 5 will turn the delete icon on and off.•
3Press DTV MENU.A confirmation message displays.•
4Press ◀/▶ to select “Yes”, and then press OK.
Rename
Change individual service names.
Press ▲/▼ to select the desired service.
2Press 6 on the remote control. A character set 
screen displays.
3Enter new name for the service. See page 18 for 
operations using the character set screen.
4Press OK.A confirmation message displays.•
5Press ◀/▶ to select “Yes”, and then press OK.
•
 
						

							
GB -20

Installation
This section describes how to reconfigure the DTV 
settings after conducting Initial auto installation on 
page 8.
Auto Scan
The TV automatically detects and stores all available 
services in your area.
Press ◀/▶ to select “Installation”.
2Press ▲/▼ to select “Auto Scan”, and then press 
OK.A confirmation message displays.•
3Press ◀/▶ to select “Yes”, and then press OK.The TV starts scanning all available DTV and radio services in your area.•
NOTETo cancel the scan in progress, press END.
Manual Scan
Manually add a new carrier by entering the desired 
carrier number or frequency band.
Press ◀/▶ to select “Installation”.
2Press ▲/▼ to select “Manual Scan”, and then 
press OK.
Manual Scan
Channel list   Ch-5
Frequency (kHz)  177500
0..9NavigateOKEND
3Press ▲/▼ to select “Channel list”, then ◀/▶ to 
enter the carrier number, and then press OK.The frequency of the selected carrier in the below cell changes correspondingly.•
4After the scan is complete, the screen shows all 
available services for the selected range.A confirmation message displays. •
5Press ◀/▶ to select “Yes”, and then press OK.
NOTEIf “Sweden” is selected on the “First installation (Country)” screen, the “Frequency (kHz)” cannot be used.
When the Country is set to Sweden in the “First 
installation (Country)”
When there is a Channel List in the data after Auto 
Scan or Manual Scan, Channel Type Selection Menu 
will be displayed and available to set Channel List 
Type.
Select the Channel List Type by pressing ◀/▶ and 
press OK.
•
•
Move
Sort the order of the selected service by moving the 
service position.
Press ▲/▼ to select the desired service.
2Press 7 on the remote control. An icon displays 
indicating the service to be moved.Pressing 7 will turn the move icon on and off.•
3Move the selected service to the desired position 
using ▲/▼, and then press OK to register the 
change.
Move To
Sort the order of the selected service by modifying 
the service number.
Press ▲/▼ to select the desired service.
2Press 8 on the remote control. Now you can 
change the service number on the left side of the 
screen.
3Enter the number using 0 - 9 numeric buttons, 
and then press OK. The service moves to the 
new position.
NOTEIf on the “First installation (Country)” screen “UK” is selected, “Move To” cannot be used in U.K.
View
Change to the service shown in the picture window.
Press ▲/▼ to select the desired service.
2Press OK on the remote control.The image shown in the picture window changes.•
3Press END to exit the Channel Organizer screen 
to view the image in full screen.
•
DTV menu operations
 
						

							
GB -2

System Configuration
Configure On-Screen Display and Child Lock 
settings.
Display Setup
The On-Screen Display appearance and the position/
duration of the service banner information can be 
customised.
Press ◀/▶ to select “System Configuration”.
2Press ▲/▼ to select “Display Setup”, and then 
press OK.
Display Setup
ENDNavigateOK
Banner timeout   4 Secs
Banner position   Bottom
Display Transparency   10%
3Press ▲/▼ to select the desired item.
4Press ◀/▶ to select the desired parameter, and 
then press END.
OSD Setup itemsSelectable itemsDescription
Banner timeout Sec/2 Secs/... 7 SecsSelect how long the service banner information appears on screen.
Banner positionTop/BottomSelect whether the service banner information appears on top or bottom of the screen.
Display TransparencyNone/0%/20%/ ...50%Select the desired level of On-Screen Display transparency.
DTV menu operations
Carrier Setup
This is provided for you to rename (label), delete, 
or re-scan carriers. “Carrier” in this context refers 
to a service station that provides a set of individual 
services.
Press ◀/▶ to select “Installation”.
2Press ▲/▼ to select “Carrier Setup”, and then 
press OK.
001  DVB-T 16QAM 184500 03 01002  DVB-T 16QAM 506000 03 01003  DVB-T 64QAM 842000 05 00  
FEC :7/8 FFT : 2k  Frequency (kHz): 506000QAM :16 GI : 1/32
S.No Carrier Name Frequency   TV Radio
Carrier Setup
ENDNavigateOK
RenameDeleteRescan
① To rename the selected carrier:
  Select the carrier, and then press RED (Rename). 
  The character set screen displays.
  Enter a new name for the carrier. See page 18 for 
details on using the character set screen.
  Press OK. 
  A confirmation message displays. 
  Press 
◀/▶ to select “Yes”, and then press OK.
② To delete the selected carrier:
  Select the carrier, and then press GREEN (Delete).
  An icon displays indicating the carrier to be 
deleted.
  Pressing GREEN will turn the delete icon on and off. 
  Press OK. 
  A confirmation message displays. 
  Press 
◀/▶ to select “Yes”, and then press OK.
③ To re-scan the selected carrier:
  Select the carrier, and then press BLUE (Rescan).
  Re-scanning starts.
  A confirmation message displays. 
  Press 
◀/▶ to select “Yes”, and then press OK.
NOTEIf “Sweden” is selected on the “First installation (Country)” screen, “Data” is displayed on the “Carrier Setup” screen.
•
 
						

							
GB -22

Password Setup (Parental Lock)
This function allows TV and Radio services to be 
restricted. It prevents children from watching violent 
or sexual scenes that may be harmful.
Press ◀/▶ to select “System Configuration”.
2Press ▲/▼ to select “Password Setup”, and then 
press OK.
3If you already set the PIN, enter it here. If not, 
enter the factory preset PIN “0000”.
4Press ▲/▼ to select “Parental Lock”.
5Press ◀/▶ to select the desired age/rating  
(4 ...18/None).
Password Setup
ENDNavigateOK
Parental Lock   None
Change password   - - - -
6Press ▲/▼ to select “Change password”.
7Enter the 4-digit number as a PIN using 0 – 9.
8Enter the same 4-digit number as in step 7 to 
confirm.“Successfully updated” displays.•
9Press END.
NOTETo view a locked channel, you must enter a PIN. When you select a locked channel, a PIN prompt message pops up. Enter the 4 digit number using 0–9.As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.See page 31 for resetting the current PIN to the factory preset “0000” if you lose or forget your PIN.
Technical Information
Check the version information of the digital module 
and allow it to be upgraded (when available).
Version
Check the version information of the digital module.
Press ◀/▶ to select “Technical Information”.
2Press ▲/▼ to select “Version”, and then press 
OK.The hardware and software versions are displayed.•
•
•
•
DTV menu operations
Software upgrade
The software for controlling the built-in DTV decoder 
can be upgraded when necessary. In Great Britain 
this can be achieved via an Over Air Download.
Preparation
Confirm and make a note of the current software 
version number as in step 2 of Software Version.
Manual upgrade
Press ◀/▶ to select “Technical Information”.
2Press ▲/▼ to select “Software upgrade”, and 
then press OK. The TV checks all carriers if there 
is a new software available for upgrade.① If upgrade via Over Air Download is available at the time:
  A confirmation message appears asking you to 
accept the upgrade or not.
  To download now, press ◀/▶ to select “Yes”, and then press OK. After the upgrade is completed, the TV restarts automatically with the new software version installed.
  To postpone the download, press ◀/▶ to select “No”, and then press OK. Enter the download time for more convenient time as instructed.
  The software upgrade will not be carried out if 
there is no new software available at the specified download time.② If upgrade via Over Air Download is NOT available at the time:
  A message tells you that there is no software 
available to be downloaded.
3Check the new software version number to 
confirm the successful upgrade.
Auto upgrade
When you tune to the service that provides the 
upgrade via Over Air Download, a confirmation 
message displays.
2Follow the screen prompts.
3Check the new software version number to 
confirm the successful upgrade.
NOTE
To scan all carriers for upgrade availability, perform the manual upgrade.The software upgrade may take about 30 minutes, but may take longer (up to 1 hour) depending on the signal status. While updating, you can switch to TV or external input mode or enter standby mode using  on the remote control unit.
CAUTIONDo not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires.
•
•
•
 
						

							
GB -23

DTV menu operations
NOTETo view paid TV broadcasting, you need to make a contract with a service provider.Please contact a service provider for details. The Common Interface Module and the CA card are neither supplied nor optional accessories.Leaving your CA card inserted does not affect free to view channels.
•
•
•
Common Interface
Check the detailed information on the Common 
Interface module card in use.
Press OK while the cursor is on “Common 
Interface”.The CI module name is displayed.•
Cl Module
Module Name    Top Up TV
ENDOK
2Press OK to access the CI menu.Detailed information on the CI card in use is displayed.•
3Press ▲/▼ to select the item, and then press OK.Detailed information on the selected item is displayed.•
Inserting a CA card 
A single DVB Common Interface (CI) slot is provided 
to allow adoption of a Conditional Access (CA) 
system by means of a plug-in CA module.
Scrambled Broadcasting service can be routed via 
the CA system.
To allow the use of smart-card type CA system, a 
Conditional Access Module (CAM) is required. This 
should be obtained along with the CA card at the 
time of purchase. Please follow the service provider’s 
instructions to activate the card.
When the compatible card is not inserted:
①Select the programme which needs the compatible CA card.The caution screen appears.•
②Insert the compatible CA card.The caution screen disappears and you can view the programme.•
CA system supported by
Crypto WorksAston CAMVIAccessNagra VisionIrdetoMR CAM
Conditional Access Module
CA card
C.I. Slot
 
						

							
GB -24

Useful features (DTV)
About EPG
With the Electronic Programme Guide (EPG), you 
can check the schedule of DTV and Radio events, 
view detailed information about them, tune to an 
event currently on-air and set a timer for future 
events.
General EPG screen
No Event Name
No Description  
0011 BBC NewsSun  20/08/2006
Guide TV Sun   20/08/2006 01:00
NavigateViewInfo
Channels  01:0001:3002:00
672_P...
679_V...
671_MNO_10step_0820_...
673_STU_SDTV Moving_...
  671_MNO_  672_PQR_SMPTE Color Bar_...  673_STU_  679_VWXYZ_Monosco_082...No Event Name
BBC NewsBBC ONEBBC TWOBBC THREECBBC  
Page - Page + Prev.Day Next Day
RADIOENDOK
①Service name
②Event name
③Picture window
④Service listShows the list of all services currently available. As you scroll down the list, the rows in the Event name list on the right will be refreshed correspondingly. 
•
⑤Event name listShows the names of current events in a grid of rows and columns. You can check scheduled event information up to several days ahead, depending on conditions.
•
Using the EPG
Press EPG.Pressing DTV/RADIO will switch between DTV and Radio mode.•
2Press ▲/▼/◀/▶ to access the desired service or 
event.The image shown in the picture window changes.
In the Service list: 
① Press ▲/▼ to scroll the page up/down. Or,
②
 Press RED (Page −) or GREEN (Page +) to 
skip to the previous/next page in one step.
In the Event name list: 
①
 Press ◀/▶ to scroll the page left/right. Or,
②
 Press YELLOW (Prev.Day) or BLUE (Next 
Day) to skip to the previous/next day in one 
step.
•
3To watch an event currently on-air, press OK.The “OK” button of Navigation buttons will be displayed as “ViewOK” when the cursor is selecting an event currently on-air, and other than this will display “TimerOK”.The TV will show the image in full screen.Selecting an event that has not yet started will activate the EPG Timer mode instead.
•
••
NOTEPressing  opens the EPG Description screen that provides more information about the selected event. Press , OK or END to exit.
Using the EPG Timer 
When the Timer is set, the TV automatically tunes to 
a preset TV event when its on-air time begins.
Press EPG.
2Press ▲/▼/◀/▶ to select the desired event to be 
preset from the Event name list, and then press 
OK.Select an event not yet started.A confirmation message displays.••
3Press ◀/▶ to select “Yes”, and then press OK.
4Press RED (Timer mode), and then press ▲/▼ to 
select the desired parameter (“Once”, “Daily” or 
“Weekly”), and then press OK.
BBC ONE  Once 20/08/06 01:05 01:05  Service Name Mode Date Time  Duration
Event Timer
Timer modeDelete TimerEdit TimerEdit Duration
OnceDailyWeekly
ENDNavigateOK
NOTEIf using this function for recording, make sure to set the timer of your recording equipment as well.
Do not switch channels while recording using this function.This function cannot be set for locked services or when Parental lock applies. (See pages 19 and 22.)Up to 8 events can be preset using the Timer function.You can choose whether or not the screen switches on when the timer event begins. See Rec screen status on page 14. This is so that if you are using the timer to make a recording to your VCR or other device, the TV screen will not switch on unless you want it to.If you are watching another event, an alarm message displays on the screen a few seconds before the preset time.To cancel the preset, select the event to delete, press GREEN (Delete Timer), press ◀/▶ to select “Yes”, and then press OK.An alert message displays when the preset events overlap one another.
•
•
•
•
••
•
•
•
①③
②
④
⑤
 
						

							
GB -25

Useful features (DTV)
Viewing a service banner
A service banner shows event names, start/end time 
of event, and other useful information.
Press . 
Service banner
0011  BBC ONE       Stereo4
   261_ABC_Mono 01:02:4317:08 17:38  20/08/2006Undefined  Age:4
①Service No.
②Service name
③Channel group (Favourite)
④Lock status
⑤DVB Teletext available
⑥DVB Subtitle available
⑦Pay TV
⑧Audio mode
⑨Duration graph
⑩Starting time/Ending time of current 
programme
⑪Genre
⑫Programme name
⑬Parental rating
⑭Time and date
2To display more detailed information, press   
again.You can verify the signal strength and quality of the selected service here.When the Country setting has been set to Sweden, press  once more to display the advanced detailed information.
•
•
Changing the start time of the Event
Select the start time of the event to change and 
press the YELLOW (Edit Timer).
2Change the start time with ▲/▼ and press OK.
NOTEYou cannot hasten the start time from the original start time of the Event.You cannot set with the same date and time of another Event.
Changing the time duration of the Event
Select the time duration of the event to change 
and press the BLUE (Edit Duration).
2Change the time duration with ▲/▼ and press 
OK.
Displaying the stored timer events
Press EPG twice.You can confirm and edit the stored timer events.•
Using the digital channel list
Select services by using the Channel list instead of 
using 0 - 9 numeric buttons or P (/).
Press OK when no other menu screen is 
displayed.
Channel list                       TV
S.No Services
CarrierDVB-T 64QAMFreq 842000 kHz
002 BBC News004 BBC ONE005 BBC TWO006 BBC THREE008 CBBC  
Channel group  All
NavigateRADIOENDOK
2The screen shows the service list in either TV or 
Radio mode sorted by favourite type (All, Fav1 
- 4) as configured in page 19. 
3Press ▲/▼ to select the desired service, and 
then press OK.The image shown in the picture window changes.•
4Press END to exit the Channel list to watch the 
image in full screen.
•
•
Currently tuned serviceService shown  in picture window
①②③④⑤⑥⑦⑧
⑨
⑩⑪⑫⑬
⑭
 
						

							
GB -26

Useful features (DTV)
TEXT to quit  Use UP/DOWN and SELECT
FULL SCREEN           BACK         HELP            MENU
WORLD FOOTBALL 2007
Angola 0-1 Portugal
Serb&M 0-1 N’lands
Mexico 3-1 Iran
England water plea
Ballack set to return
World Football Interactive
NewsLatest headlines fromGermany
Using the Digital Service (UK only)
Some services bring you programmes with 
the Digital Service, letting you experience DTV 
interactively.
When provided, the Digital Service will start when 
you press .
Sample Digital Service screen
Using the multi audio function
Change the audio mode and language for the 
currently viewed service. 
Press  when no other menu screen is 
displayed.
No. Language Code
Multi audio
001 ENG002 SPA  
Audio mode   Stereo
ENDNavigateOK
2Press ◀/▶ to select the desired audio mode 
(Left, Right, L+R, Stereo), and then press ▼ to 
move down.
3Press ▲/▼ to select the desired language 
available for the service, and then press END.
NOTEOnce you tune to another service or the power is turned off, the setting returns to the parameter set in the Language Setup menu (page 18).
Displaying subtitles
Set the desired language for the subtitle display and  
enable/disable the subtitle display.
Press  when no other menu screen is 
displayed.
Language  English
  Subtitle
2Press  repeatedly to select desired subtitle 
language in available languages.To turn off the subtitles, select “Off”.•
NOTEThe subtitle may not be displayed depending on the broadcast.•
•
 
						

							
GB -27

Appendix
PC compatibility chart
ResolutionHorizontal FrequencyVertical FrequencyVESA Standard
VGA640 × 48031.5 kHz60 Hz
SVGA*800 × 60037.9 kHz60 Hz
*  We recommend that the output setting from the PC 
be set to VGA as SVGA will produce less than optimal viewing quality.
VGA and SVGA are registered trademarks of International Business Machines Co., Inc.
NOTEThis TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the VESA 60Hz standard. Any variations from this standard will result in picture distortions.
RS-232C port specifications
PC Control of the TV
When a programme is set, the TV can be controlled from the PC using the RS-232C terminal.The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.Attach an RS-232C cable cross-type (commercially available) to a 9 pin D-sub/MINI-DIN (optional: AN-A1RS) for the connections.
NOTEThis operation system should be used by a person who is accustomed to using PCs.
•
•
•
•
9 pin D-sub/MINI-DIN conversion cable(optional: AN-A1RS)
RS-232C serial control cable(cross type, commercially available)
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received 
command and sends a response message to the PC.
Do not send multiple commands at the same time. 
Wait until the PC receives the OK response before 
sending the next command.
Command format Eight ASCII codes + CR
 
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits  Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits:  Parameter 0 – 9, ×, blank, ?
Parameter
Input the parameter values, aligning 
left, and fill with blank(s) for the 
remainder. (Be sure that four values 
are input for the parameter.)
When the input parameter is not within 
an adjustable range, “ERR” returns. 
(Refer to “Response code format”.)
When “?” is input for some commands, 
the present setting value responds.
Response code format
Normal response
Problem response (communication 
error or incorrect command)
0 0 55
1 0 0
–3 0
0 0 09
0
? ? ??
?
O K
Return code (0DH)
E RR
Return code (0DH)
Communication conditions
Set the RS-232C communications settings on the PC 
to match the TV’s communications conditions. 
The TV’s communications settings are as follows:
Baud rate:9,600 bps
Data length:8 bits
Parity bit:None
Stop bit:1 bit
Flow control:None
 
						

							
GB -28

Commands
Appendix
Rating table for Child Lock
Broadcasted  
rating
User-
 
adjusted rating
AGE
456789101112131415161718
Universal−−−−−−−−−−−−−−
Parental−−−−−−−−−−
X-rated
Broadcasted  
rating
User-
 
adjusted rating
UniversalParentalX-rated
Universal−−−
Parental−−
X-rated−
CONTROL ITEMCOMMANDPARAMETERCONTROL CONTENTS
POWER SETTINGPOWR0___POWER OFF (STANDBY)INPUT SELECTION AITGD____INPUT SWITCHING (TOGGLE)ITVD____TV (CHANNEL FIXED)IDTV____DTV (CHANNEL FIXED)IAVD1___EXT1IAVD2___EXT2IAVD3___EXT3IAVD4___PCIAVD????1 to 4CHANNELDCCH**__TV DIRECT CHANNEL (00 to 99)DCCH????00 to 99CHUP____CHANNEL UPCHDW____CHANNEL DOWN
DTVD***_DTV DIRECT CHANNEL (001 to 999*)DTVD????001 to 999*DTUP____DTV CHANNEL UPDTDW____DTV CHANNEL DOWNINPUT SELECTION BINP10___EXT1 (CVBS)INP11___EXT1 (RGB)INP12___EXT1 ( AUTO)INP1????0 to 2INP20___EXT2 (Y/C)INP21___EXT2 (CVBS)INP2????0 to 1INP30___EXT3INP40___PCAV MODE SELECTIONAVMD0___AV MODE SELECTION (TOGGLE)AVMD1___STANDARDAVMD2___SOFTAVMD3___ECOAVMD4___USERAVMD5___DYNAMICAVMD????1 to 5VOLUMEVOLM**__VOLUME (0 -50)VOLM????0 to 50
CONTROL ITEMCOMMANDPARAMETERCONTROL CONTENTSPOSITIONHPOS***_H-POSITION PC (-30 to +30)HPOS????PC (-30 to +30)
VPOS***_V-POSITION PC (-10 to +10)VPOS????PC (-10 to +10)CLCK***_CLOCK (0 to 180)CLCK????0 to 180PHSE**__PHASE (0 to 40)PHSE????0 to 40WIDE MODEWIDE0___WIDE MODE (Toggle)WIDE1___4:3WIDE2___16:9WIDE????1 to 2MUTEMUTE0___MUTE (TOGGLE)MUTE1___MUTE ONMUTE2___MUTE OFFMUTE????1 to 2SOUND WIDEACDV0___SOUND WIDE (Toggle)ACDV1___SOUND WIDE ONACDV2___SOUND WIDE OFFACDV????1 to 2AUDIO CHANGEACHA____SOUND SELECT (ST/BILINGUAL/MONO)SLEEP TIMEROFTM0___OFFOFTM1___30 minOFTM2___60 minOFTM3___90 minOFTM4___120 minOFTM????0 to 120TEXTTEXT0___TELETEXT OFFTEXT1___TELETEXT CHANGE (TOGGLE)TEXT????0 to 1DCPG***_DIRECT PAGE JUMP (100 to 899)DCPG????100 to 899
NOTEIf an underbar (_) appears in the parameter column, enter a space.If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
*  If on the “First installation (Country)” screen “Sweden” is 
selected, input a 4-digit number 0001 to 9999.
•
•