Sharp Lc 20sd5e Operation Manual

LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN 
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
LC-20SD5E
LC-20SD5S
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
 

SPECIAL NOTE FOR USERS IN THE UK
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to 
be replaced, a BSI or ASTA approved BS 1362 fuse marked  or ASA and of the same rating as above, which is also indicated 
on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible...

GB -
Remote control unit (×1)AC cord (×2)Cable tie (×1)Cloth (×1)
(For Europe, except 
U.K. and Eire)
(For U.K. and Eire)
Page 4 and 5Page 3Page 3Page 2
“AA” size battery (×2) ...........Page 4Operation manual (This publication)••
OPERATION MANUAL
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.The factory preset PIN (Personal Identification Number) for DTV is “0000”.
•
•
ENGLISH
ENGLISH
Contents...

GB -2

Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of 
troublefree operation of your product, please read the Important Safety Precautions carefully before using this 
product.
Important Safety Precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as...

GB -3

Quick guide
Setting the TV
NOTEUnplug the AC cord from the LCD TV set and power outlet when the LCD TV set is not to be used\
 for a long period of time.Please ensure your 75-ohm coaxial cable is fitted with a DIN 45325 (IEC169-2) co\
axial plug and plug it into the antenna terminal at the rear of the LCD TV set (antenna cable not supplied).
••
75-ohm coaxial cable (round cable)
To antenna terminal ()
Removing the terminal 
cover
Pull down the hooks to open the cover.
Round lock for 
Kensington...

GB -4

Quick guide
Inserting the batteries
Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become \
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
Open the battery cover.2Insert two supplied “AA” size 
batteries.
3Close the battery cover.
Place batteries with their terminals corresponding to the (+) and (−) indications in the battery compartment.
•
CAUTIONImproper use of batteries can...

GB -5

BroadcastStereoBilingualMonaural
NICAMMono
StereoSound 2
Sound 1+2Mono
Sound 1
Mono
Nicam
A2 StereoMono
StereoSound 2
Sound 1+2Mono
Sound 1Mono
Quick guide
Remote control unit
423
6
7
8
6
78
9
3
20
2
22
23
24
9
0

25
2
4
5
5
 (Standby/On)Enter standby mode or turn on the power. (See page 8.)
2DTV/RADIO*DTV: Switch between RADIO and DTV mode.
3DTV/TVSwitch between analogue TV and DTV mode.
4 (Mute)Switch the sound on and off....

GB -6

Quick guide
TV (Front/Top/Side view)
Remote sensor
STANDBY/ON indicatorThe STANDBY/ON indicator lights up green when the power is on, and red when in the standby mode (the indicator will not light when the main power is off). 
HeadphonesPlug the headphone mini-plug into the headphone jack.Adjust the sound volume using  (+)/(–) on the remote control.
On-screen display
7PMVNF

0
NOTEHeadphones are not included in the supplied accessories.No sound is heard from the main unit speakers when a...

GB -7

AUDIO OUTPC TERMINALEXT1
EXT3
EXT2

Connecting External Devices
You can enjoy picture and sound by connecting devices, such as a VCR or 
home video game system, to the terminals located on the rear of the LCD 
TV set.
When connecting an external device, turn off the power of the LCD TV set 
first to prevent any possible damage.
NOTEThe cables marked with * are commercially available items.For more information about external device connections, see the operation manuals of your external...

GB -8

Turning on the power
Press  on the TV.The  indicator on the TV changes from red to green.
Standby mode
Press  on the remote control unit when the TV is on.The TV enters standby mode and the image on the screen disappears.The  indicator on the TV changes from green to red.You can turn the TV on by pressing  on the remote control unit from standby mode.Weak electric power is still consumed even when  is turned off.To completely turn off the TV, press  on the TV.
Display status indicator
OffPower...