Sharp DX B450P User Manual

							User’s Guide10 -9
At the Duplex Module
Clearing Paper Jams
2.Open and close the top cover to clear the Jam message.
Duplex at the interior of the top cover
1.Lift the lever at the top left hand side of the duplex module to unlock it and open the top 
cover of the duplex module. 
2.Examine the interior of the top cover and remove any jammed paper. If paper is torn, 
check for any remaining torn pieces of paper.
Downloaded From ManualsPrinter.com Manuals 
						

							10 - 10User’s Guide
At the Offset Catch Tray
Clearing Paper Jams
3.Close the top cover of the duplex module to clear the Jam message. 
At the Offset Catch Tray
1.Open the Offset Catch Tray cover by pulling the tab at the top left of the cover.
2.Remove any jammed paper. 
Downloaded From ManualsPrinter.com Manuals 
						

							User’s Guide10 - 11
At the Offset Catch Tray
Clearing Paper Jams
3.Close the Offset Catch Tray cover. 
4.Lift up the second lever from the top left corner of the back of the printer to open the rear 
cover. 
5.Remove any jammed paper. If paper is torn, check for any remaining torn pieces of paper. 
The Fuser Unit is hot. Be careful not to touch it as you can get burned. Make sure that the levers 
at both ends of the Fuser Unit are returned to the positions they were in before clearing the jam. 
Downloaded From ManualsPrinter.com Manuals 
						

							10 - 1 2User’s Guide
At the Offset Catch Tray
Clearing Paper Jams
6.Close the rear cover to clear the Jam message.
Downloaded From ManualsPrinter.com Manuals 
						

							11- 1
Chapter 11: Windows Utilities
A variety of Windows utilities are available with your 
printer. During installation, you can choose to install any of 
these utilities. If you have not installed a desired utility and 
wish to, rerun the installation and select the desired utility. 
These utilities allow direct communication with your 
printer to accomplish specific tasks.
Font and Macro Manager Utility
The Font and Macro Manager (FMM) utility supports the 
downloading of PCL soft fonts and macros to User Flash, 
Compact Flash, and Disk. PCL font formats 0, 5, 15, and 
20 can be stored on the Flash or Disk device. Advanced 
filter control can be enabled by deselecting Default 
Filtering in the Tools menu. 
You can view these files on the Hard disk via the EWS.
In this Chapter...
 Font and Macro 
Manager Utility 

Utility 
 PCL5 Tray Mapping 
Utility 
 Printer 
Maintenance Utility 
 Direct PDF Utility 
Downloaded From ManualsPrinter.com Manuals 
						

							11- 2User’s Guide
Status Monitor Utility
Windows Utilities
Status Monitor Utility
The printer Status Monitor utility runs on the Windows XP, Win2K, or Vista system to which 
the printer is connected via a Parallel, USB, or network port. This utility communicates 
bi-directionally with the printer to obtain status information about error conditions and status. 
These conditions are reported using “pop-ups” on the screen.
PCL5 Tray Mapping Utility
This utility allows you to reassign the PCL5 tray ID selection sequences so an existing 
application can be used to select the desired paper trays. The Tray Mapping Utility changes the 
PCL5 tray IDs to custom values. This is useful to programs that generate printer data directly 
without going through the Windows Printer Driver. Older MS-DOS programs are typically the 
programs that require tray ID remapping. Once the tray IDs are changed, the new mapping 
affects all users of the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							User’s Guide11- 3
PCL5 Tray Mapping Utility
Windows Utilities
To use the program:
1.Select the target printer. 
The printer must be installed on a Windows system to be a target printer. 
2.Enter new tray IDs. 
3.Click OK.
Downloaded From ManualsPrinter.com Manuals 
						

							11- 4User’s Guide
Direct PDF Utility
Windows Utilities
Direct PDF Utility
The printer’s Direct PDF Utility allows you to send a Version 1.3 PDF file directly to the printer 
without the use of Adobe Acrobat on the host computer and without using the printer driver.
To start Direct PDF Print, right-click on the PDF document and select Direct PDF Print. 
Downloaded From ManualsPrinter.com Manuals 
						

							Index
I-1
Symbols
SNMP Alerts 7-6
Numerics
2-Sided Printing 4-9
A
A4 2-5
A5 2-5
A6 2-5
About 1-1
Access panel 2-1
Accessing the Driver 4-6
Accessories 8-1
acid paper 2-11
Actions 9-8
Active 3-2
Address Ranges/Permissions 6-5
adhesive backing 2-11
Administrator Address 6-5
Adobe 2-4
Advanced tab 4-7, 4-16
alkaline paper 2-11
Application access driver 4-6
Auto Configuration 4-3
Auto Resize 3-7, 5-6, 6-4
Auto tray changing 4-14
Automatically sensed 2-5
Auto-Sense 3-7
B
B5 2-5
Binding Edge 4-11
Blank or All Black 9-2
Blank Pages 3-7, 4-15, 6-4
Blurred 9-2
Bond 2-6
Brightness 4-16
Buttons 3-2
C
C5 2-5
Cancel 3-2 button 4-5
Cancel printing 4-5
Cannot print 9-6
Carbon paper 2-11
Cardstock 2-6
CF 3-17
CF Card 8-22
Clarity 9-7
Clock Adjust 6-4
Collate 4-9
Collated 5-5
Color 2-6
Color Matching 5-5
COM10 2-5
COM9 2-5
Compact Flash Card 8-22
Components 2-1
Configuration Summary 3-2, 3-4
Configuration tab 4-3
Console Security 6-5
Consumable Message 6-5
Contrast 4-16
Conventions 1-1
Copies 3-6, 4-8, 5-5, 6-4
Counter Type 3-20
Cover Open 6-5
Cover Page 5-6
Cover Sheet 4-13
Cover sheet 4-13
CR Mode 3-14, 6-4
Custom 2-5
Custom Size 2-6, 3-7, 4-13
Custom Size Unit 3-8, 6-4
D
Date & Time Settings 6-4
Date/Time Menu 3-17
Day 3-17
Default Gateway 6-5
Default Source 3-6, 6-4
Default Values 4-2
Destination 4-9
Device Status 6-3
Downloaded From ManualsPrinter.com Manuals 
						

							I-2User’s Guide
DHCP 6-5, 7-1
Direct PDF Utility 11-4
Disk 3-17
Display 3-1
Display Area 6-2
Display Language 3-15, 6-3, 6-4
DL 2-5
DNS 6-5
DNS Settings 6-4
Driver 4-1
Driver access 4-6
Driver Configure 7-2
Drivers 2-4
Duplex 3-6, 4-9, 6-4
Duplex Bind 3-6, 6-4
Duplex Module 2-2, 8-10, 10-8
DX-B350P 1-1
DX-B450P 1-1
E
Edge to Edge 3-8, 6-4
Embedded web server 6-1
Envelope 2-6
Envelopes 2-8
Erase Cycles 6-5
Error 9-8
Error messages 9-8
Ethernet 2-2
EtherTalk 6-5
EWS 6-1
EWS IP 7-2
Executive 2-5
F
Factory Defaults 3-15, 6-4
Faded 9-2
Fault 3-2
Feed error 9-7
FF Mode 3-14, 6-4
fibrous paper 2-11
Fit to page 4-14
FLASH Menu 3-17
Flash Summary 3-17
FMM 11-1
Font and Macro Manager Utility 11-1
Font Number 3-13, 6-4Font Source 3-13, 6-4
Font Substitution 4-17
Fonts 4-17
Format device 3-17
Front view 2-1
Full-color transparencies 2-11
full-color transparencies 2-11
Functions Menu 3-16
Fuser Count 3-20
Fuser Counter 6-4
Fuser Unit 2-3, 10-4
G
GSM 2-5
H
Hard Disk Drive 8-21
Heat sensitive paper 2-11
Hewlett Packard Web Jet Administrative Com-
patibility 7-6
Hex Print 3-16, 6-4
Hold After Print 4-21
Hold Only 4-21
Hour 3-17
Hub Link Speed/Duplex Configuration 7-3
I
I/O Port Configuration 7-3
IEEE 1284 2-2
Image Counter 3-20, 6-4
Image Options 4-16
Indicators 3-2
Info 3-2
Input tray linking 4-14
Install options in windows driver 4-3
Installing/uninstalling the duplex module 8-15
Installing/uninstalling the offset catch tray 8-15
Installing/uninstalling the tray module 8-2
Interface Menu 3-8
Internal Components 2-3
Invoice 2-5
IP Address 6-5, 7-1
IP Filtering 6-5, 7-4
IPv4 6-1
IPv6 6-1, 6-5
IPv6 Implementation 7-5
Downloaded From ManualsPrinter.com Manuals