Sharp DX B350P User Manual

User’s Guide3-15
Operator Panel Menus
Operator Panel
System Menu
The System menu allows you to specify system-level operation of the printer during normal and 
certain error conditions. Items available in this menu are described below
Menu ItemVa l u e  DefaultDescription
Factory Defaults U.S.
Non-U.S.U.S. for 110V
Non-U.S. for 
230VResets the menu to factory defaults. You 
change these defaults by changing the 
options in the Operator Panel; however, 
settings in the driver will override Operator 
Panel...

3-16User’s Guide
Operator Panel Menus
Operator Panel
Quality Menu
The Quality Menu allows you set image quality options. Items available in this menu are 
described below 
Functions Menu
The Functions menu provides a variety of performance and summary reports. Items available in 
this menu are described below
Job Timeout 00000 - 99999 00000 Increase or decrease the limit (in seconds) 
for the total time of processing a PostScript 
job. A 0 setting indicates no timeout. This 
setting applies only to...

User’s Guide3-17
Operator Panel Menus
Operator Panel
FLASH/Disk/CF Menu
For each installed drive: FLASH, Disk, CF the following menu items are available. The menu 
only appears on the Operator Panel if the accessory is installed. Items available in this menu are 
described below
Date/Time Menu
The Date/Time Menu provides setup for Date and Time options. Items available in this menu 
are described below
Menu ItemVa l u e  DefaultDescription
Print List of files Prints the selected file. 
Delete Deletes the...

3-18User’s Guide
Operator Panel Menus
Operator Panel
Status Information
Status information is printed on the Configuration Summary.
Changes to some configuration items may not be available in the Operator Panel. Some items 
are only configurable via the EWS and do not appear in the Operator Panel although their 
configuration is displayed in the Configuration Summary.
CategoryDescription
Status Info This listing on the Configuration Summary provides the status for each tray’s Paper Type, Paper 
Size, and...

User’s Guide3-19
Operator Panel Menus
Operator Panel
     mDNS SVC Name data entry Model Name 
plus last 7 digits 
of MAC 
(Network) 
address
     Current Zone  empty Shows the name of the current zone for 
EtherTalk networking
     Preferred Zone * Allows you to choose from a list of existing 
zones. * uses the default zone.
Netware Setup
        Print Server Name data entry Model Name 
plus last 7 digits 
of MAC 
(Network) 
address
       NDS Tree Name data entry empty
       NDS Context data entry...

3-20User’s Guide
Operator Panel Menus
Operator Panel
Understanding Page Counters
Page Counters are included in Status information.
Counter TypeDefinition
Image Counter This counter reflects the number of images (sides) printed for the printer.
Toner Page Count This counter reflects the number of pages printed using the installed cartridge. 
Sheet Counter This counter displays the number of sheets (one sheet equals two sides) the printer 
has printed. 
Usage Count This counter calculates usage by image...

4-1
Chapter 4: Windows Operations
This chapter describes features of the Windows Driver. The 
driver allows you set default settings for all print jobs as 
well as print settings for individual print jobs. Similar 
features may be available in the Operator Panel or EWS. If 
there is a conflict between settings in the Operator Panel, 
Printing Preferences (default driver settings), or Embedded 
Web Server and printer settings set via your application for 
individual print jobs, the application settings...

4-2User’s Guide
Setting Default Values
Windows Operations
10 .Click Browse… and navigate to:
\Drivers\\\ where:
•  is the drive letter for your CD drive, typically this is D:
•  is: 
• ENUS is for English drivers
• FREN is for French drivers
• SPAN is for Spanish drivers.
•  is:
• W2K is for Windows 2000, Windows XP, Vista, Server 2003 32bit and Server 2008 
32bit.
• W9X is for Windows 98 and Windows ME.
• W64 is for Vista 64bit, Server 2003 64bit and Server 2008 64bit.
• WNT is for Windows NT4.
•  is:
•...

User’s Guide4-3
Setting Default Values
Windows Operations
The Printer’s configuration window appears.
The driver can automatically recognize all the installed options for your printer. To get the 
installed options, click the Configuration tab and then the Auto Configuration button. You 
can also manually install an option by selecting it from the pulldown and changing its 
status.
Downloaded From ManualsPrinter.com Manuals 

4-4User’s Guide
Printing a Test Page
Windows Operations
3.On the General Tab, click Printing Preferences
The Printing Preferences window appears.
4.Any options set in any tab become your default values.
Printing a Test Page
You can print a Test page to verify printer connectivity and operation.
To print a test page through your Printer Properties:
1.Select the General tab within your Printer Properties accessed by right-clicking your 
printer.
2.Click Print Test.
3.Click OK.
4.Click OK.
Downloaded From...