Sharp DX B350P User Manual

User’s Guide2-13
Loading Paper
Getting to Know Your Printer
5.Squeeze the right width guide and slide it to the desired paper size. 
6.Fan the paper well. 
7.Load the paper with the side to be printed facing up and all 4 corners aligned. Make sure 
the right width guide is correctly aligned with the paper. 
NOTE:Do not load paper exceeding the maximum fill line or the maximum capacity allowed. 
Align the right width guide to the paper width. If the right width guide is not in place, the paper will
not be...

2-14User’s Guide
Loading Paper
Getting to Know Your Printer
8.Replace the lid of the paper tray and firmly close the lid. 
9.Firmly insert the tray in the printer. 
Loading Paper Larger Than A4/Letter Size In The Paper Tray
1.Place the paper tray on a flat surface. 
2.Remove the lid of the tray. 
3.Slide the right and left lock tabs in the paper tray outwards to unlock them. 
Downloaded From ManualsPrinter.com Manuals 

User’s Guide2-15
Replacing the Toner Cartridge
Getting to Know Your Printer
4.Grasp the front of the paper tray and extend it until the right and left lock tabs in the paper 
tray move inwards and lock automatically.
5.Squeeze the length guide and slide it to the desired paper size. 
6.Squeeze the right width guide and slide it to the desired paper size. 
7.Load the paper with the side to be printed facing up and with all 4 corners aligned. 
8.Close the lid of the paper tray. 
9.Push the paper tray...

2-16User’s Guide
Replacing the Toner Cartridge
Getting to Know Your Printer
1.Open the top cover and remove the empty Toner Cartridge. 
2.Take the Toner Cartridge out of the box and shake it 7 to 8 times as shown in the diagram. 
3.Place the Toner Cartridge on a flat surface and pull the seal out horizontally. Note that the 
seal may offer resistance and a firm pull may be necessary to extract it from the Toner 
Cartridge. 
NOTE:When pulling out the seal, pull it out horizontally. The tape might break if...

User’s Guide2-17
Power Save Mode
Getting to Know Your Printer
4.Hold the Toner Cartridge by the grip and insert it into the slot inside the printer. 
5.Close the top cover securely. 
6.Wait for the printer to become Ready.
Power Save Mode
This printer is equipped with a low power mode to reduce power consumption when it is left 
idle. When no print data is received for 15 minutes (default), the printer will enter Power Save 
mode. The Operator Panel display indicates the printer is in Power Save mode....

2-18User’s Guide
Understanding Printing Options
Getting to Know Your Printer
Downloaded From ManualsPrinter.com Manuals 

3-1
Chapter 3: Operator Panel
Operator Panel Features
The Operator Panel is located on the front of the printer. It 
contains the display, indicators, and push buttons that allow 
you to view and change default printer settings. All 
features of the printer are accessible through the Operator 
Panel. These changes affect all documents printed unless 
instructions are provided through your application’s printer 
settings.
NOTE:If there is a conflict between settings in the Operator
Panel, Printing...

3-2User’s Guide
Operator Panel Features
Operator Panel
LED Indicators
The LED indicators indicate printer status. The table below explains the LED indicators.
Push buttons
The Operator Panel push buttons allow you to access and navigate menus and also assist you in 
recovering from printer errors. The table below explains the functions of the nine push buttons.
LEDColorWhen OffWhen OnWhen Blinking
Green Printer is NOT 
READYPrinter is READY N/A
Green Printer is IDLE Printer is ACTIVE (processing 
a...

User’s Guide3-3
Operator Panel Features
Operator Panel
Navigating the Operator Panel Menus
When you press the MENU button on the Operator Panel, you enter the printer’s menu system. 
At that point, the first line of the display contains the text “Menu”, indicating that you are in the 
menu system. The second line of the display lists the active menu, which you can change by 
pressing the NEXT or PREVIOUS buttons. 
If you press the NEXT button repeatedly, the second line of the display cycles through the...

3-4User’s Guide
Printing a Configuration Summary
Operator Panel
1.Pressing the MENU button on the Operator Panel enters the printer’s menu. 
The first line of the display contains the text “Menu”.
2.Press the NEXT button until the text “Paper Menu” is shown on the second line of the 
display.
3.Press the SELECT button to enter the Paper menu. 
4.Press the NEXT button until the text “Copies” is shown on the second line of the display.
5.Press the SELECT button to enter the copies submenu.
6.Press the NEXT...