Sharp AR M207E User Manual
Have a look at the manual Sharp AR M207E User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the cautions and installation requirements sections. Be sure to keep all operation manuals handy for reference including this manual, the Operation manual (for general information and copier) and operation manuals for any optional equipment which has been installed. MODEL DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for general information and copier) PART 1: GENERAL INFORMATION •BEFORE USING THE PRODUCT •TROUBLESHOOTING AND MAINTENANCE •PERIPHERAL DEVICES AND SUPPLIES PART 2: COPIER OPERATION •COPY FUNCTIONS •CONVENIENT COPY FUNCTIONS •APPENDIX • KEY OPERATORS GUIDE 12 24 40 45 64 73 75 Page AR-M161/AR-M162/AR-M165 AR-M206/AR-M207 With the RSPF installed AR-M161 AR-M162 AR-M165 AR-M206 AR-M207 HINAKS1 QSZZ Pegasus-E_Copy_Ex.book 0 ページ ２００４年９月２５日 土曜日 午前１２時２８分 Downloaded From ManualsPrinter.com Manuals
Warranty While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. © Copyright SHARP Corporation 2004. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws.Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In some areas, the POWER switch positions are marked I and on the copier instead of ON and OFF. The symbol denotes the copier is not completely de-energized but in a stand-by condition at this POWER switch position. If your copier is so marked, please read I for ON and for OFF. Caution! For a complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. Required in IEC-950 (EN 60 950) - Europe • The equipment should be installed near an accessible socket outlet for easy disconnection. Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom MAINS PLUG WIRING INSTRUCTIONS The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse to BS1362 marked or and of the same rating as the one removed from the plug must be used. Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code below. DANGER:The fuse should be removed from the cut-off plug and the plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in this mains lead may not correspond with coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug which is marked with the letter E, or by the safety earth symbol , or coloured green or green- and-yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. If you have any doubt, consult a qualified electrician. WARNING: THIS APPARATUS MUST BE EARTHED. ➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ ➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢ Pegasus-E_Copy_Ex.book 1 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
1 Part 1: General Information Pegasus-E_Copy_Ex.book 1 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
2 Pegasus-E_Copy_Ex.book 2 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
3 Notes • Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please contact your nearest authorised service representative. This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem is discovered, please contact your dealer or nearest authorised service representative. Aside from instances provided for by law, SHARP is not responsible for failures occurring during use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product. PRODUCT CONFIGURATIONS This product series consists of the models indicated below. The product configuration varies by model. The explanations and illustrations in this manual generally use the AR-M206/AR-M207 (with the optional RSPF installed). (As of the end of October, 2004) The Dual function board cited in this manual can be installed as an option in some models and is pre-installed standard in other models. For detailed information, please refer to PERIPHERAL DEVICES AND SUPPLIES (page 40). The display screens, messages, and key names shown in the manual may differ from those on the actual machine due to product improvements and modifications. ModelAppearanceCopying speedPaper traysOptional trays AR-M161 AR-M162 AR-M16516 copies/min. One (250 x 1)250-sheet paper feed unit (AR-D24) 2 x 250-sheet paper feed unit (AR-D25) AR-M206 AR-M207 With the RSPF installed20 copies/min. Two (250 x 2) Some models may not be available in some countries.Note Chapter00.fm 3 ページ ２００４年１０月１４日 木曜日 午後６時１分 Downloaded From ManualsPrinter.com Manuals
4 CONTENTS Part 1: General Information PRODUCT CONFIGURATIONS ................................................................................................................ 3 CAUTIONS ................................................................................................................................................. 6 CAUTIONS ON USING..................................................................................................................................... 6 LASER INFORMATION .................................................................................................................................... 7 INSTALLATION REQUIREMENTS ........................................................................................................... 8 ENVIRONMENTAL INFORMATION ................................................................................................................. 8 MANUALS PROVIDED WITH THE PRODUCT......................................................................................... 9 MAIN FEATURES .................................................................................................................................... 10 1BEFORE USING THE PRODUCT PART NAMES AND FUNCTIONS ................... 12 OPERATION PANEL ......................................14 OPERATION IN COPY, PRINT, SCAN, AND FAX MODES ...................................................16 TURNING THE POWER ON AND OFF ........... 17 POWER ON ....................................................17 POWER OFF ..................................................17 LOADING PAPER............................................ 18 PAPER ............................................................18 LOADING PAPER...........................................19 CHANGING THE PAPER SIZE SETTING OF A TRAY ..............................................................21 DISABLING (ENABLING) AUTO TRAY SWITCHING ...................................................22 AUDITING MODE ............................................ 23 NUMBER OF ACCOUNTS IN AUDITING MODE .............................................................23 USING AUDITING MODE...............................23 2TROUBLESHOOTING AND MAINTENANCE TROUBLESHOOTING ..................................... 25 MACHINE/COPYING PROBLEMS ................ 25 INDICATORS AND DISPLAY MESSAGES .... 28 REMOVING MISFEEDS .................................. 29 ORIGINAL MISFEED IN THE SPF ................ 29 MISFEED IN THE BYPASS TRAY ................ 30 MISFEED IN THE MACHINE ......................... 31 MISFEED IN TRAY 1 ..................................... 33 MISFEED IN TRAY 2 ..................................... 34 REPLACING THE TONER CARTRIDGE ........ 35 CHECKING THE TOTAL OUTPUT COUNT ... 36 CLEANING THE MACHINE............................. 37 CLEANING THE DOCUMENT GLASS AND SPF/DOCUMENT COVER............................. 37 CLEANING THE BYPASS TRAY PAPER FEED ROLLER ......................................................... 37 CLEANING THE TRANSFER CHARGER ..... 38 ADJUSTING THE DISPLAY CONTRAST ....... 39 3PERIPHERAL DEVICES AND SUPPLIES OPTIONAL EQUIPMENT ................................ 40 REVERSING SINGLE PASS FEEDER / SINGLE PASS FEEDER................................ 41 250-SHEET PAPER FEED UNIT / 2 X 250-SHEET PAPER FEED UNIT................... 41 DUAL FUNCTION BOARD ............................ 42 STORAGE OF SUPPLIES ............................... 42 PROPER STORAGE ..................................... 42 Pegasus-E_Copy_Ex.book 4 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
5 CONTENTS Part 2: Copier Operation 4COPY FUNCTIONS NORMAL COPYING ........................................ 45 MAKING A COPY DARKER OR LIGHTER ....48 SELECTING THE TRAY .................................49 SETTING THE NUMBER OF COPIES ...........49 SELECTING THE ORIGINAL SIZE ................50 USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL..............................51 REDUCING OR ENLARGING A COPY........... 52 AUTOMATIC RATIO SELECTION .................52 MANUAL RATIO SELECTION (PRESET COPY RATIOS/ZOOM)..............................................52 SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY (XY zoom copying) ......................................... 54 TWO-SIDED COPYING ................................... 56 TWO-SIDED COPYING ..................................56 TWO-SIDED COPYING OF ONE-SIDED ORIGINALS ....................................................57 TWO-SIDED COPIES OF TWO-SIDED ORIGINALS (ONLY WHEN USING THE RSPF) ......................59 ONE-SIDED COPIES OF TWO-SIDED ORIGINALS (ONLY WHEN USING THE RSPF) ......................60 TWO-SIDED COPIES USING THE BYPASS TRAY... 61 DUAL PAGE COPY (Dual page copy) ........... 62 INTERRUPTING A COPY RUN (Interrupt copying)........................................................... 63 5CONVENIENT COPY FUNCTIONS ROTATING THE IMAGE 90 DEGREES (Rotation copy) ............................................... 64 SORT MODE .................................................... 64 COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER (2 in 1 / 4 in 1 copy) ............... 66 CREATING MARGINS WHEN COPYING (Margin shift) ................................................... 68 ERASING SHADOWS AROUND THE EDGES OF A COPY (Erase copy) ............................... 69 CARD SHOT .................................................... 71 6APPENDIX SPECIFICATIONS ........................................... 73 7KEY OPERATORS GUIDE PURPOSE OF THE KEY OPERATOR PROGRAMS .................................................... 75 PROGRAMS RELATED TO ALL FUNCTIONS OF THE MACHINE (COPY, FAX, PRINTER, AND NETWORK SCANNER FUNCTIONS) .............. 75 PROGRAMS FOR COPY MODE ....................... 75 PROGRAMMING A KEY OPERATOR CODE ... 75 PROGRAMMING A KEY OPERATOR CODE ... 76 KEY OPERATOR PROGRAM LIST ................ 77 USING THE KEY OPERATOR PROGRAMS .. 78 ACCOUNT CONTROL ....................................... 79 DEVICE CONTROL............................................ 81 OPERATION SETTING ...................................... 83 ENERGY SAVE .................................................. 85 COPY SETTINGS .............................................. 86 MATERIAL SAFETY DATA SHEET................ 89 INDEX .............................................................. 97 KEY OPERATOR CODE NUMBER: FACTORY SETTING ........................................................ 103 Pegasus-E_Copy_Ex.book 5 ページ ２００４年９月２５日 土曜日 午前１２時２１分 Downloaded From ManualsPrinter.com Manuals
6 CAUTIONS Follow the cautions below when using this machine. CAUTIONS ON USING Warning: • The fusing area is hot. Exercise care in this area when removing misfed paper. Do not look directly at the light source. Doing so may damage your eyes. Caution: Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it back on. Place the machine on a firm, level surface. When the machine is not used for a long time, for example, during prolonged holidays, turn the power switch off and remove the power cord from the outlet. When moving the machine, be sure to turn the power switch off and remove the power cord from the outlet. Do not cover the machine with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat dissipation, damaging the machine. Do not make any modifications to this machine. Doing so may result in personal injury or damage to the machine. Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from printing by national law. Other items may be prohibited by local law. Money Stamps Bonds Stocks Bank drafts Checks Passports Drivers licences Do not touch the photoconductive drum. Scratches or smudges on the drum will cause dirty prints. Store spare toner cartridges in a cool dry place without removing from the package before use. If they are exposed to direct sunlight or excessive heat, poor copies may result. Fusing unit Chapter00.fm 6 ページ ２００４年１０月５日 火曜日 午前１１時５７分 Downloaded From ManualsPrinter.com Manuals
7 CAUTIONS LASER INFORMATION Wave length 785 nm + 10 nm/- 15 nm Pulse times (8.141 µs ± 0.1 µs)/7 mm Output power 0.14 mW - 0.22 mW At the production line, the output power of the scanner unit is adjusted to 0.8 MILLIWATT PLUS 10 % and is maintained constant by the operation of the Automatic Power Control (APC). Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. For North America: SAFETY PRECAUTIONS This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below. Do not remove the cabinet, operation panel or any other covers. The equipments exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. For Europe: CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARATCAUTION INVISIBLE LASER RADIATION WHEN OPEN INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VORSICHT UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN. ADVARSEL USYNLIG LASERSTRÅLNING VED ÅBNING, NÅR SIKKERHEDSBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. VARNING OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1. CLASS 1 LASER PRODUCT LASER KLASSE 1 Pegasus-E_Copy_Ex.book 7 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
8 INSTALLATION REQUIREMENTS Improper installation may damage this product. Please note the following during initial installation and whenever the machine is moved. 1. The machine should be installed near an accessible power outlet for easy connection. 2. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. For the power supply requirements, see the name plate on the back of the main unit. 3. Do not install your machine in areas that are: damp, humid, or very dusty exposed to direct sunlight poorly ventilated subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. 4. Be sure to allow the required space around the machine for servicing and proper ventilation. ENVIRONMENTAL INFORMATION Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker. A small amount of ozone is produced within the printer during operation. The emission level is insufficient to cause any health hazard. NOTE: The present recommended long term exposure limit for ozone is 0.2 mg/m3 (0.1 ppm) calculated as an 8 hr. time-weighted average concentration. However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier in a ventilated area. As an ENERGY STAR ® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Note 20 cm (8) 20 cm (8)20 cm (8) Pegasus-E_Copy_Ex.book 8 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals