Sharp AR M207E User Manual

Be sure to become thoroughly familiar with this manual to 
gain the maximum benefit from the product.
Before installing this product, be sure to read the 
cautions and installation requirements sections.
Be sure to keep all operation manuals handy for reference 
including this manual, the Operation manual (for general 
information and copier) and operation manuals for any 
optional equipment which has been installed.
MODEL
DIGITAL MULTIFUNCTIONAL 
SYSTEM
OPERATION MANUAL
(for general information and...

Warranty
While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation 
makes no warranty of any kind with regard to its content. All information included herein is subject to change without 
notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this 
operation manual. 
© Copyright SHARP Corporation 2004. All rights reserved. Reproduction, adaptation or translation without prior 
written...

1
Part 1: General Information
Pegasus-E_Copy_Ex.book  1 ページ  ２００４年９月２３日　木曜日　午前１１時４１分
Downloaded From ManualsPrinter.com Manuals 

2
Pegasus-E_Copy_Ex.book  2 ページ  ２００４年９月２３日　木曜日　午前１１時４１分
Downloaded From ManualsPrinter.com Manuals 

3
Notes
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the 
manual, please contact your nearest authorised service representative.
 This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or 
other problem is discovered, please contact your dealer or nearest authorised service representative.
 Aside from instances provided for by law, SHARP is not responsible for failures occurring during...

4
CONTENTS
Part 1: General Information
PRODUCT CONFIGURATIONS ................................................................................................................ 3
CAUTIONS ................................................................................................................................................. 6
CAUTIONS ON USING..................................................................................................................................... 6
LASER INFORMATION...

5
CONTENTS
Part 2: Copier Operation
4COPY FUNCTIONS
NORMAL COPYING ........................................ 45

MAKING A COPY DARKER OR LIGHTER ....48

SELECTING THE TRAY .................................49

SETTING THE NUMBER OF COPIES ...........49

SELECTING THE ORIGINAL SIZE ................50

USING THE BYPASS TRAY TO COPY A 
SPECIAL SIZE ORIGINAL..............................51
REDUCING OR ENLARGING A COPY........... 52

AUTOMATIC RATIO SELECTION .................52

MANUAL RATIO SELECTION (PRESET...

6
CAUTIONS
Follow the cautions below when using this machine.
CAUTIONS ON USING
Warning:
• The fusing area is hot. Exercise care in this area when removing misfed paper.
 Do not look directly at the light source. Doing so may damage your eyes.
Caution:
 Do not switch the machine rapidly on and off. After turning the machine off, wait 10 
to 15 seconds before turning it back on.
 Place the machine on a firm, level surface.
 When the machine is not used for a long time, for example, during prolonged...

7
CAUTIONS
LASER INFORMATION
Wave length 785 nm + 10 nm/- 15 nm
Pulse times (8.141 µs ± 0.1 µs)/7 mm
Output power 0.14 mW - 0.22 mW
At the production line, the output power of the scanner unit is adjusted to 0.8 MILLIWATT PLUS 10 % and is maintained 
constant by the operation of the Automatic Power Control (APC).
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous 
radiation exposure.
For North America:
SAFETY PRECAUTIONS
This...

8
INSTALLATION REQUIREMENTS
Improper installation may damage this product. Please note the following during initial installation and whenever the 
machine is moved.
1. The machine should be installed near an accessible power outlet for easy connection.
2. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current 
requirements. Also make certain the outlet is properly grounded.
For the power supply requirements, see the name plate on the back of the main unit....