Sharp AR M205 User Manual

29
COPY FUNCTIONS
2
IMAGE ROTATION IN DUPLEX COPYING
This function is used to invert the top and bottom of the image on the front side of the paper during two-sided copying.
1Hold down the [ORIGINAL TO COPY] 
key until the   indicator blinks.
The currently set setting 
code blinks in the first 
digit of the number of 
copies display.
2Press a numeric key to enter the 
setting code.
To enable the setting, 
press [1] key. To disable 
the setting, press [0] key. 
The factory default 
setting is 0.
The...

30
DUAL PAGE COPYING
A dual page original can be automatically separated into two pages during copying. This feature is convenient for 
making copies of books and other dual page originals on individual sheets of paper.
1Place the original on the document 
glass, aligning the division between 
the pages with the size marker 
(8
1/2). Close the document 
cover/SPF/RSPF.
Copying will begin from 
the page to the right of 
the size marker.
2Press the [DUAL PAGE COPY] key 
and make sure that the DUAL PAGE...

31
2
INTERRUPTING A COPY RUN
(Interrupt copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished, 
the copy run will resume using the original copy settings.
1Press the [INTERRUPT] key ( ) to 
interrupt the copy run.
The INTERRUPT 
indicator will light up and 
the machine will revert to 
the initial settings. (p.12)
The INTERRUPT 
indicator will blink until 
the current copy run 
stops.
2Remove the previous original(s) and 
place the...

32
3
Chapter 3
CONVENIENT COPY FUNCTIONS
This chapter explains convenient copy functions that can be used when the dual function board (AR-EB7) is installed.
ROTATING THE IMAGE 90 DEGREES
(Rotation copy)
When Auto paper select mode or automatic ratio selection are in operation and the original is placed in a different 
orientation (vertical or horizontal) than the paper, the original image will be automatically rotated 90 degrees to 
enable correct copying onto the paper.
This function is convenient for...

33
CONVENIENT COPY FUNCTIONS
3
Using the document glass
1Place the first original. (p.18)
2Select the original size. (p.18)
If the original size is not selected, 11 x 17 is 
automatically used.
3Press the [SORT/GROUP] key to 
select the desired mode.
The modes are selected 
in the order SORT, 
GROUP, Off.
4Set the number of copies and other 
settings, and then press the [START] 
key ( ).
The ORIGINAL DATA indicator blinks, and the 
original is scanned into memory.
5When the start indicator lights,...

34
COPYING MULTIPLE ORIGINALS 
ONTO A SINGLE SHEET OF PAPER
(2 IN 1 / 4 IN 1 copy)
Multiple originals can be copied onto a single sheet of paper in a selected layout pattern.
This function is convenient for compiling multi-page reference materials into a compact format, or for providing an 
overview of all pages of a document on a single page.
Using the document glass
1Place the first original. (p.18)
2Select the original size. (p.18)
3Press the [2 IN 1 / 4 IN 1] key to select 
the desired mode.
The mode...

35
CONVENIENT COPY FUNCTIONS
3
Using the SPF/RSPF
1Place the originals. (p.19)
2Press the [2 IN 1 / 4 IN 1] key to select 
the mode.
The mode is selected in 
the order 2 IN 1, 4 IN 
1, Off.
3Set the number of copies and other 
settings, and press the [START] key ( ).
The copy is delivered to the paper output tray.
If the memory becomes full
 If the memory becomes full while scanning the 
originals, the ORIGINAL DATA indicator will 
blink, FUL will appear in the display, and the 
machine will stop...

36
CREATING MARGINS WHEN COPYING
(Margin shift)
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to increase the margin by 
approximately 1/2.
The location of the margin to be increased can be select to be either at the left edge or the top of the page (AR-M205 
only).
1Place the original(s). 
If you are using the 
document glass, place 
the side of the original 
where you wish to create 
the margin on the right.
If you are using the 
SPF/RSPF, place the 
side of...

37
3
ERASING SHADOWS AROUND THE 
EDGES OF A COPY
(Erase copy)
●This feature is used to erase shadows that appear around the edges of copies of books and other thick originals. 
(EDGE ERASE)
●The feature can also erase the shadow that appears down the center of books and other originals that open up. 
(CENTER ERASE)
●The factory default setting for the width of the erasure is approximately 1/2. The width can be changed in the 
user programs. (p.45)
1Place the original(s). (p.18)
2If the original is placed...

38
4
Chapter 4
PRINTER/SCANNER FUNCTIONS
The machine includes a USB 1.1 port and a parallel port as standard equipment.
A computer can be connected to these ports to use the machine as a printer or a scanner. 
When the dual function board is used, the following functions can be used in addition to the standard printer/scanner 
functions.
• High-speed data transfer (when connected to a USB 2.0 port)
 ROPM* function
 Automatic rotation printing
To use the machine as a printer or scanner, the printer...