Sharp AR M160 User Manual

19
COPY FUNCTIONS
2
Copying from the SPF/RSPF
1Make sure that an original has not 
been left on the document glass. 
Close the SPF/RSPF.
2Adjust the original guides to the size 
of the original(s).
3Set the original(s) face up in the 
document feeder tray.
Insert the original into the document feeder tray as 
far as it will go. When the original is set, the 
SPF/RSPF indicator will light up.
The ORIGINAL SIZE indicator corresponding to the 
size of the original lights up.
Make sure that the ORIGINAL...

20
COPY FUNCTIONS
Auto paper select mode
When the AUTO PAPER SELECT indicator lights up, Auto paper select mode is enable. This function 
automatically selects the paper that is the same size as the original (5-1/2 x 8-1/2, 8-1/2 x 11, 8-1/2 x 11R, 
8-1/2 x 14 and 11 x 17 paper). 
Auto paper select mode can be disabled in the user programs. (p.44)
 If a zoom setting is selected after placing the original, the paper size that is appropriate for the zoom setting will 
be automatically selected.
 Auto...

21
COPY FUNCTIONS
2
MAKING A COPY DARKER OR LIGHTER
Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to 
the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two 
original types and five exposure levels for each original type.) The exposure level used in automatic exposure 
adjustment can also be changed. (ADJUSTING THE AUTOMATIC EXPOSURE LEVEL (p.42))
Original types
●AUTO...

22
COPY FUNCTIONS
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
●The set number of copies appears in the display. A 
maximum of 999 copies (factory default setting) 
can be set.
●If you wish to make only a single copy, copying is 
possible with the display showing 0.
Important note when making a large number 
of copies
The maximum number of copies can be changed in 
the user programs. (p.44)
When the maximum number of pages that can be 
held in the paper output tray...

23
COPY FUNCTIONS
2
4Press the [AUTO IMAGE] key.
The AUTO IMAGE 
indicator lights up and the 
appropriate ratio for the 
original size and paper 
size is selected. (The 
indicator of the selected 
ratio will light up.)
5Set the number of copies and other 
copy settings, and then press the 
[START] key ( ).
The copy will be delivered to the paper output 
tray.
MANUAL RATIO SELECTION
Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( ,  ) can be 
pressed to quickly...

24
COPY FUNCTIONS
SELECTING THE VERTICAL AND HORIZONTAL 
COPY RATIOS SEPARATELY
(XY ZOOM copying)
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Example: Reduction only in the horizontal direction.
Ratios that can be selected will vary depending on the position of the original.
1Place the original(s) in the document 
feeder tray or on the document glass.
2If the original is placed on the 
document glass, select the original 
size. (p.18)
3Press the...

25
COPY FUNCTIONS
2
6Use the [PRESET RATIO] selector 
keys ( ,  ) and [Zoom] keys ( ,  ) 
to change the copy ratio in the 
horizontal direction.
Press the [PRESET RATIO] selector keys ( , 
) to select a ratio close to the desired ratio, and 
then press the [Zoom] keys ( ,  ) to adjust 
the ratio in increments of 1%.
The ratio appears in the display.
7Press the [Copy ratio display] key 
().
The selected ratio for the horizontal direction will 
be entered and the display will change to the 
number of...

26
TWO-SIDED COPYING USING THE 
BYPASS TRAY
To perform manual two-sided copying, follow these steps.
Example: Copying originals A and B onto each side of one sheet of paper
1Copy original A.
2Place original B as shown below.
Vertically-oriented 
original:
If the original is oriented 
vertically, place it in the 
same orientation as 
original A.
Horizontally-oriented 
original:
If the original is oriented 
horizontally, place it with 
the top and bottom and 
left and right sides 
reversed with respect to...

27
2
AUTOMATIC TWO-SIDED COPYING
(AR-M205 only)
On models that support automatic two-sided copying, two originals placed on the document glass can be copied 
onto each side of a single sheet of paper. In addition, an RSPF can be used to copy two originals onto one sheet of 
paper, or one two-sided original onto two sheets of paper, or one two-sided original onto each side of one sheet of 
paper. 
Original → PaperUsable paper
Document 
glassOne-sided original 
→ Two sides
5-1/2 x 8-1/2, 8-1/2 x 11, 
8-1/2...

28
COPY FUNCTIONS
Using the document glass
1Place the original that you wish to 
copy onto the front side of the paper 
on the document glass and close the 
document cover.
2Select the original size. (p.18)
3Press the [ORIGINAL TO COPY] key, 
and make sure that the   
indicator is lit.
4Set the number of copies and other 
settings, and then press the [START] 
key ( ).
The display blinks, and the original is scanned 
into memory.
5When the start indicator lights, 
remove the first original and then 
place...