Sharp AR 5520N User Manual

							39
PRINTER FUNCTIONS
3
FITTING THE PRINTED IMAGE TO THE PAPER 
(Fit To Paper Size)
The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine.
Follow the steps shown below to use this function. The explanation below assumes that you intend to print an A3 
size document on A4 size paper.
1Click the Paper tab in the printer 
driver setup screen.
2Select the original size (A3) of the 
print image in Paper Size.
3Check the Fit To Paper Size button.
4Select the actual size of paper to be 
used for printing (A4).
The size of the printed image will be 
automatically adjusted to match the paper loaded 
in the machine.
ROTATING THE PRINT IMAGE 180 DEGREES 
(Rotate 180 degrees)
The feature rotates the image 180 degrees so that it can be printed correctly on paper that can only be loaded in one 
orientation (such as envelopes).
1Click the Main tab in the printer 
driver setup screen.2Check the Rotate 180 degrees box.
Paper Size: A3
Fit To Paper Size: A4
A3 size 
document
(Paper Size)A4 size paper 
(Fit To Paper 
Size)
ABCDABCD
Downloaded From ManualsPrinter.com Manuals 
						

							40
PRINTER FUNCTIONS
ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
This function is used to enlarge or reduce the image to a selected percentage. This allows you to enlarge a small 
image or add margins to the paper by slightly reducing an image.
1Click the Paper tab in the printer 
driver setup screen.
2Select Zoom and click the 
Settings button.
The actual paper size to be 
used for printing can be 
selected from the pop-up 
menu.
3Select the zoom ratio.
Directly enter a number or 
click the   button to change 
the ratio in increments of 1%. 
PRINTING FAINT TEXT AND LINES IN BLACK 
(Text To Black/Vector To Black)
When printing a colour image, colour text and lines that are faint can be printed in black. (Raster data such as bitmap 
images cannot be adjusted.) This allows you to bring out colour text and lines that are faint and difficult to see.
1Click the Advanced tab in the printer 
driver setup screen.2Check the Text To Black box and/or 
the Vector To Black box.

selected to print all text 
other than white text in 
black.

selected to print all vector 
graphics other than white 
lines and areas in black.
The Zoom setting is not available when N-Up Printing is selected.Note
ABCDABCD
Downloaded From ManualsPrinter.com Manuals 
						

							41
PRINTER FUNCTIONS
3
ADJUSTING THE BRIGHTNESS AND CONTRAST OF 
THE IMAGE 
(Image Adjustment)
The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These 
settings can be used for simple corrections when you do not have image editing software installed on your 
computer.
1Click the Advanced tab in the printer 
driver setup screen.
2Click the Image Adjustment button.
3Adjust the image settings.
To adjust a 
setting, drag the 
slide bar   or 
click the   or 
 button.
ADDING A WATERMARK TO PRINTED PAGES (Watermark)
Faint shadow-like text can be added to the background of the printed image as a watermark. The size, density, and 
angle of the watermark text can be adjusted. The text can be selected from a pre-stored list, or entered to create an 
original watermark.
1Click the Watermarks tab in the 
printer driver setup screen.2Select the watermark settings.
Select a stored 
watermark from 
the pull-down 
menu. You can 
click the Edit 
button to edit the 
font and select 
other detailed 
settings.
If you wish to create a new watermark, enter 
the text of the watermark in the Text box and 
click the Add button.
Note
Downloaded From ManualsPrinter.com Manuals 
						

							42
PRINTER FUNCTIONS
TWO-SIDED PRINTING
The machine can print on both sides of the paper. This function is useful for many purposes, and is particularly 
convenient when you want to create a simple pamphlet. Two-sided printing also helps conserve paper.
1Click the Main tab in the printer 
driver setup screen.2Select 2-Sided(Book) or 
2-Sided(Tablet).
When using two-sided printing, select a source other than Bypass Tray for the Paper Source in the Paper tab.
Paper orientationPrinting result
Ve r t i c a l2-Sided (Book) 2-Sided (Tablet)
Horizontal
2-Sided (Book)2-Sided (Tablet)
The pages are printed so that they can be 
bound at the side.The pages are printed so that they can be 
bound at the top.
Note
Downloaded From ManualsPrinter.com Manuals 
						

							43
3
SAVING FREQUENTLY USED PRINT 
SETTINGS
Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used 
settings or complex colour settings under an assigned name makes it easy to select those settings the next time you 
need to use them.
SAVING SETTINGS AT THE TIME OF PRINTING 
(User Settings)
Settings can be saved from any tab of the printer driver properties window. Settings configured on each tab are 
listed at the time of saving, allowing you to check the settings as you save them.
For the steps for opening the printer driver, see BASIC PRINTING (p.35).
1Configure print settings on each tab 
and click the Save button on any 
tab.2After checking the displayed settings, 
enter a name for the settings 
(maximum of 20 characters).
3Click the OK button.
Using saved settings
Select the user settings that you wish to use on any tab.
Deleting saved settings
Select the user settings that you want to delete in Using saved settings (above), and click the Delete button.
 Up to 30 sets of user settings can be saved.
 A watermark that you created cannot be 
saved in user settings.
Note
Downloaded From ManualsPrinter.com Manuals 
						

							
44
4
Chapter 4
SCANNER FUNCTIONS
This chapter explains how to use the scanner functions.
SCANNING OVERVIEW
The flow chart shown below provides an overview of scanning.
*
1 To scan using the machines operation panel, you must first install Button Manager and establish the appropriate 
settings in the Control Panel. For details, see  SETTING UP BUTTON MANAGER in the Start Guide.
*2 TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN 
driver on your computer, you can scan and work with images using a variety of TWAIN-compliant applications.
*3 WIA (Windows Imaging Acquisition) is a Windows function that a llows a scanner, digital camera or other imaging device to 
communicate with an image processing application. The WIA driv er for this machine can only be used in Windows XP/Vista.
• You must first connect to the machine using SC-Scan A to use the scanner functions. For details, see 
CONNECTING TO AND DISCONNECTING FROM THE SCANNER FUNCTION USING SC-Scan A (p.46) .
 Scan jobs received while the machine is copying or printing will be stored in memory. When the copy job is  finished, the scan jobs will begin.
 Scanning is not possible when the front or side cover is opened for machine maintenance, or when a misfeed  occurs or the machine runs out of paper or toner, or  when the drum cartridge reaches its replacement time. 
 If an original misfeed occurs in the RSPF, scanning will not be possible until the misfed original is removed and 
the RSPF is restored to a usable state.Note
Scanning from a 
TWAIN*2-compliant or 
WIA*3-compliant application Scanning from the Scanner 
and Camera Wizard 
(Windows XP)
Place the original in the scanning position
For more information, refer to  SCANNING USING THE KEYS  ON THE MACHINE (p.47).
Start up a Twain-compliant 
or WIA-compliant 
application, and select the 
machines scanner driver.  Start up the Scanner 
and Camera Wizard 
from Control Panel in 
your computer.
Change the machine to 
scanner mode and select the 
scan menu. (ScanMenu SC1 
to ScanMenu SC6)
Set the scan preferences
(only if the preferences are set 
to appear) Set the scan preferences
Scanning
SCANNING FROM A TWAIN-COMPLIANT  APPLICATION (p.50)
SCANNING FROM A 
WIA-COMPLIANT APPLICATION 
(Windows XP/Vista) (p.54)
Scanning
OUTLINE OF BUTTON  MANAGER (p.48) Scanning
SCANNING FROM THE  Scanner and Camera 
Wizard (Windows XP)  (p.55)
Scanning from the machine*
1
Downloaded From ManualsPrinter.com Manuals 
						

							45
4
OUTLINE OF SC-Scan A
SC-Scan A is a software utility that allows you to use the scanner function via a network. On the machine, a device 
server has been installed. SC-Scan A recognises the device server and establishes the connection to the device 
(the scanner function). For details on connecting to and disconnecting from the scanner function, see 
CONNECTING TO AND DISCONNECTING FROM THE SCANNER FUNCTION USING SC-Scan A (p.46).
SC-Scan A is automatically installed when the scanner driver of the machine is installed. For the procedure to install 
the scanner driver of the machine, see INSTALLING THE SOFTWARE in the Start Guide.
Help button
Click this button to display the Online help menu 
and About SC-Scan A. You can view the Help or 
version information of SC-Scan A from the menu.
Option button
Click this button to display the Option window. In 
the window, you can configure the settings for 
basic operation and screen display for SC-Scan A, 
and broadcast addresses.
Device server list window
This list shows the device server and the device 
(the scanner function) with icons. For details on 
icons, see the Online help of SC-scan A.Add to Favorites button
Select the device (the scanner function) from the 
Device server list window and click the Add to 
Favorites button to register the scanner function to 
the Favorites list window. In the Favorites list 
window, you can configure advanced settings with 
the Properties button.
Search button
Click this button to search the machine if not listed in 
the Device server list window.
Connect button
Select the device (the scanner function) from the 
list and click the Connect button to connect to the 
scanner function.
1
76
2
3
54
Device server tab
1
76
2
910
8
Favorites tab
1
2
3
4
5
6
Downloaded From ManualsPrinter.com Manuals 
						

							46
SCANNER FUNCTIONS
Disconnect button
Select the device (the scanner function) from the 
list and click the Disconnect button to disconnect 
from the scanner function.
Favorites list window
This list shows the device (the scanner function) 
which is added to the list with icons. For details on 
icons, see the Online help of SC-scan A.Properties button
Select the device (the scanner function) from the 
Favorites list window and click the Properties 
button to display the properties window of the 
scanner function. In the window, you can configure 
advanced settings.
Delete button
Select the device (the scanner function) from the 
Favorites list window and click the Delete 
button to delete the machine from the Favorites 
list window.
CONNECTING TO AND DISCONNECTING FROM THE 
SCANNER FUNCTION USING SC-Scan A
The procedure for connecting to and disconnecting from the scanner function using SC-Scan A is explained below. 
Note that multiple users cannot connect to the scanner function at a time. After using the scanner function, make 
sure to click the Disconnect button to release the function.
1Click the Start button, select All 
Programs, select SC-Scan A, and 
then click SC-Scan A.
2Select the device (the scanner 
function) in the Device server list 
window or Favorites list window 
and click the Connect button.
The network connection between your computer 
and the scanner function has been established. 
You can use the scanner function of the machine.
3When you have finished scanning, 
select the device (the scanner 
function) from the list and click the 
Disconnect button. 
The network connection is disconnected.
7
8
9
10
 In Windows XP, click the start button, 
select All Programs, select SC-Scan A, 
and then click SC-Scan A.
 In Windows 2000, click the Start button, 
select Programs, select SC-Scan A, and 
then click SC-Scan A.Note
Downloaded From ManualsPrinter.com Manuals 
						

							47
4
SCANNING USING THE KEYS ON 
THE MACHINE
When scanning is performed by this method, the application that has been set in Button Manager will automatically 
start and the scanned image will be pasted into the application. For the steps to allocate applications using the 
Button Manager or other settings, see BUTTON MANAGER SETTINGS (p.49).
Scanning from the operation panel of the machine
1Press the [SCAN] key ( ).
When the SCAN indicator 
lights up, the machine 
enters scanner mode.
2Place the original(s) that you wish to 
scan on the document glass/RSPF.
[When scanning from the document glass]
Place the original face 
down on the document 
glass. Align the edge of 
the original with the 
original size scale, to be 
centred with the centring 
mark ( ).
[When scanning from the RSPF]
Set the original(s) face up 
in the document feeder 
tray.
3Press the [SCAN MENU] key to begin 
scanning.
Scanning will start and the 
scanned data will be 
transferred to the 
application.
The target application can 
be selected by the [SCAN 
MENU] key.
For the default application 
allocated to each key, see 
BUTTON MANAGER 
SETTINGS (p.49).
The display will show the 
number of the [SCAN 
MENU] key that you
pressed, and the number 
will light and the SCAN 
indicator will be blinking.
If the machine is in copy mode, press the [SCAN] key ( ) to switch to scanner mode and clear the previously 
set copy settings.Note
Original size scale mark
 To return to copy mode from scanner mode, 
press the [SCAN] key ( ) or [CLEAR 
ALL] key ( ).
 For limitations on copying and printing in 
scanner mode, and scanner mode while 
copying or printing, see OPERATION IN 
COPY, PRINTER, AND SCANNER 
MODES (p.14). Note
Downloaded From ManualsPrinter.com Manuals 
						

							48
SCANNER FUNCTIONS
OUTLINE OF BUTTON MANAGER
Button Manager is a software utility that allows you to use the scanner function at the machine. Button Manager 
allows you to configure six sets of scanning settings as a scan menu on the machine.
To view Help for a setting, click the   button in the upper right-hand corner of the window and then click the 
setting.
To begin scanning using the machines operation panel, settings must be established in the Control Panel after 
Button Manager is installed. For information on installing Button Manager and establishing the Control Panel 
settings, see SETTING UP BUTTON MANAGER in the Start Guide. For information on scanning using the 
machines operation panel, see SCANNING USING THE KEYS ON THE MACHINE (p.47).
You can use Button Manager to select and change the functions of the six scan menus. Refer to BUTTON 
MANAGER SETTINGS (p.49).
Ta b
Click to set scan menu options. Each tab contains 
scan settings for the scan menu.
Application Selection area
Select the start-up application here.
Show TWAIN setting screen when scanning
Checkbox
You can select whether or not the TWAIN screen 
is shown. When the checkbox is selected, the 
TWAIN screen appears when scanning is 
executed to let you adjust the scanning conditions.
Scan Setup area
Set the scan conditions.OK button
Click to save your settings and exit the dialog box.
Cancel button
Click this button to exit the dialog box without 
making any changes to the settings.
Apply button
Click to save your settings without closing the 
dialog box.
Help button
Click this button to display the help file for Button 
Manager.
2
3
4
5678
1
Some applications may limit your choice of 
settings. 
1
2
3
4
Note
5
6
7
8
Downloaded From ManualsPrinter.com Manuals