Sharp AR 5520N User Manual

19
COPY FUNCTIONS
2
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
●The set number of copies appears in the display. A 
maximum of 999 copies (factory default setting) can be set.
●If you wish to make only a single copy, copying is 
possible with the display showing 0.
Important note when making a large number 
of copies
When the maximum number of pages (about 250 
pages) that can be held in the paper output tray are 
output, copying will temporarily stop. When this...

20
COPY FUNCTIONS
4Press the [AUTO IMAGE] key ( ).
The AUTO IMAGE 
indicator ( ) lights 
up and the appropriate 
ratio for the original size 
and paper size is 
selected. (The indicator 
of the selected ratio will 
light up.)
5Set the number of copies and other 
copy settings, and then press the 
[START] key ( ).
The copy will be delivered to the paper output 
tray.
MANUAL RATIO SELECTION
Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( ,  ) can 
be pressed to...

21
COPY FUNCTIONS
2
SELECTING THE VERTICAL AND HORIZONTAL COPY 
RATIOS SEPARATELY 
(XY ZOOM Copying)
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Example: Reduction only in the horizontal direction.
Ratios that can be selected will vary depending on the position of the original.
1Place the original(s) in the document 
feeder tray or on the document glass.
2If the original is placed on the 
document glass, select the original 
size. (p.15)
3Press the...

22
COPY FUNCTIONS
6Use the [PRESET RATIO] selector 
keys ( ,  ) and [Zoom] keys ( , 
) to change the copy ratio in the 
horizontal direction.
Press the [PRESET RATIO] selector keys ( , 
) to select a ratio close to the desired ratio, 
and then press the [Zoom] keys ( ,  ) to 
adjust the ratio in increments of 1%.
The ratio appears in the display.
7Press the [Copy ratio display] key 
().
The selected ratio for the horizontal direction will 
be entered and the display will change to the 
number of copies...

23
2
AUTOMATIC TWO-SIDED COPYING
Two originals placed on the document glass can be copied onto each side of a single sheet of paper. In addition, an 
RSPF can be used to copy two originals onto one sheet of paper, or one two-sided original onto two sheets of paper, 
or one two-sided original onto each side of one sheet of paper. 
Original → PaperUsable paper
Document 
glassOne-sided original → Two sides
A5 to A3
 The bypass tray cannot be 
used.
RSPFOne-sided original 
→ Two sidesTwo-sided original 
→...

24
COPY FUNCTIONS
Using the document glass
1Place the original that you wish to 
copy onto the front  side of the paper 
on the document glass and close the 
document cover.
2Select the original size.  (p.15)
3Press the [ORIGINAL TO COPY] key, 
and make sure  that the   
indicator is lit.
4Set the number of copies and other settings, 
and then press the [START] key ( ).
The display blinks, and the original is scanned 
into memory.
5When the start indicator lights, remove 
the first original and then...

25
COPY FUNCTIONS
2
IMAGE ROTATION IN DUPLEX COPYING
This function is used to invert the top and bottom of the image on the front side of the paper during two-sided copying.
1Hold down the [ORIGINAL TO COPY] 
key until the   indicator blinks.
The currently set setting 
code blinks in the first 
digit of the number of 
copies display.
2Press a numeric key to enter the 
setting code.
To enable the setting, 
press [1] key. To disable 
the setting, press [0] key. 
The factory default 
setting is 0.
The...

26
TWO-SIDED COPYING USING THE 
BYPASS TRAY
To perform manual two-sided copying, follow these steps.
Example: Copying originals A and B onto each side of one sheet of paper
1Copy original A.
2Place original B as shown below.
Vertically-oriented 
original:
If the original is oriented 
vertically, place it in the 
same orientation as 
original A.
Horizontally-oriented 
original:
If the original is oriented 
horizontally, place it with 
the top and bottom and 
left and right sides 
reversed with respect to...

27
2
DUAL PAGE COPYING
A dual page original can be automatically separated into two pages during copying. This feature is convenient for 
making copies of books and other dual page originals on individual sheets of paper.
1Place the original on the document 
glass, aligning the division between 
the pages with the size marker ( A4). 
Close the document cover/RSPF.
Copying will begin from 
the page to the right of 
the size marker.
2Set the original size to A3.
3Press the [DUAL PAGE COPY] key 
( ) and...

28
INTERRUPTING A COPY RUN 
(Interrupt Copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished, 
the copy run will resume using the original copy settings.
1Press the [INTERRUPT] key ( ) to 
interrupt the copy run.
The INTERRUPT 
indicator will light up and 
the machine will revert to 
the initial settings. (p.8) 
The INTERRUPT 
indicator will blink until 
the current copy run 
stops.
2Remove the previous original(s) and 
place the...