Sharp Aquos User Manual

9
ENGLISH
Connecting Your TV to a Wireless or Wired Network 
You have the option to connect your TV to a wireless or wired network to\
 access the Internet. For more information about 
the network settings on TV, see Network Menu on page 19.
Connecting to a wireless network  
Our built-in wireless LAN adapter supports the IEEE 802.11 b/g/n communi\
cation protocols and we recommend that 
you use an IEEE 802.11n router. When you play a video over an IEEEE 802.\
11 b/g connection, the video may not play...

10
 Option 2
You can attach your TV to your LAN by connecting the  LAN port on the back of your TV to an IP Sharer which is 
connected to an external modem. Use an Ethernet cable for the connection\
. See the illustration below.
  Option 3
Depending on how your network is configured, you may be able to attach y\
our TV to your LAN by connecting the  LAN
 
port on the back of your TV directly to a network wall outlet with an Et\
hernet cable. See the diagram below. 
If you have a Dynamic Network, you...

11
Using Your TV Remote Control 
Buttons on your TV remote
Remote control range information
 The remote control can work at a distance of up to 26 feet in front of t\
he TV set.
 It can work at a 30 degree horizontal or vertical angle.
SLEEP
VOLCH
OK
CC
BA CK EXIT
INPUTPower on / off
Enter Channels / input  numbers
Media content control function buttons Dash button
 
Select a digital sub-channel
D-pad (up/down/left/right  navigation buttons)
Volume (up / down)
Mute and restore sound Adjust Sleep timer...

12
Begin using your remote
1. Slide the back cover to open the battery compartment of the remote contr\
ol. 
2.  Insert two AAA size batteries. Make sure to match the (+) and (-) en\
ds of the batteries with the (+) and (-) ends 
indicated in the battery compartment. 
3.  Replace the battery compartment cover.
NOTES
•	Discard batteries in a designated disposal area. Do not throw them into \
a fire.
•	 Remove old batteries immediately to prevent them from leaking into the b\
attery compartment.
•	 If you...

13
Completing the First-Time Setup Menu 
Press the [  ]] button on the remote to turn on the TV. 
After the splash screen that displays the SHARP logo appears, begin the \
first-time setup menu.
Screen Task
1. Using the D-pad arrows of 
your remote, choose your 
Language , 
Country  and 
Time 
Zone . 
2.  Navigate to the Forward arrow 
and press 
[OK].
TIP:  The edge of the drop-down 
boxes and the back and forward 
arrows change to blue when you 
select them.
1.  Press 
[OK] on your remote to 
select...

14
ScreenTask
If your TV does not automatically 
detect an 
Ethernet connection, 
then select  WiFi. When you’re 
done, select your network from 
the list that displays and move to 
the next screen.
Select how you receive your TV 
channels. Choose from one of 
the following sources below and 
then move to the next screen.
•	 TV
•	 AV
•	 COMPONENT
•	 HDMI
NOTE
•	If you use an antenna to 
receive channels, then you 
must complete the first-time 
setup menu in order to run 
a channel scan.
Press the  [OK]...

15
Shortcuts Instructions 
You can use shortcuts on the remote control for fast operation. 
Turning your TV on or off
 To turn your TV on:
1.  Connect the power cord to the back of the TV, then plug the power cord i\
nto an AC outlet.
2.  When the TV is powered on, press the
 [ 
 ] button on the remote to turn TV.
 
To turn your TV off, press the
 [  ] button on the remote.
NOTES
•	
When your TV is in standby mode, it is still consuming power. To complet\
ely disconnect power, please remove the  
plug...

16
Viewing channel information
As you use the [CH+/CH-] button on your remote to scroll through channels, an information banner appears on the top 
of the screen.
The information banner displays the following information:
1.  Channel number
2.  Lock status
3.  Input
4.  Program name
5.  Show identification
6.  Channel name
7.  Current date and time
8.  Prompt
9.  Beginning and end time of the next program
10.  Start/Stop time progress bar of the current program
If you are watching a particular channel,...

17
Basic Settings 
Your SHARP TV comes with many TV setting features to allow you to custom\
ize the picture based on your viewing 
preference and environment. As you navigate throughout different screens\
 to access settings, some of the indicators 
appear as words On and Off and some are open 
 and closed  symbols. An  indicator signifies a feature that is 
disabled.
Using the Settings Menu
You can press the  [
  ]
 button to access the 
Quick Settings Menu, then press the 
[
 >
 ]
 button on the D-pad...

18
•	Noise Reduction:  Improve how clear the picture appears by reducing noise.
•	 Adaptive Contrast:  Automatically darken dark areas and lighten light areas of images to see more details.
•	 Color Temperature:  Select a preset color temperature.
•	 White Balance:  Adjust the intensity
 of red, green and blue lights to view the true colors of all images in the 
picture.
•	 Color Tuner:  Adjust the 
Hue, 
Saturation  and 
Brightness  of color settings.
 
Restore Defaults Picture Settings:  Restore all...