Sharp Aquos Lc 70le735u Operation Manual

							59
Link Operation Menu
Recorder Power On/Off
Device Operation panel
[By AQUOS SP]
Play from Rec. List
Show Start Menu
Change Media of Device
Link Booking (Rec. Book)
Change Audio Output Device
Change Surround Mode
HDMI Device Selection
AQUOS LINK Setup Link Operation
MenuLink
Operation
Start Recording
Stop Recording Link Operation
MenuLink
Operation
Displaying the Link Operation Menu
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “AQUOS LINK Setup”, and 
then press ENTER.
•  The AQUOS LINK Setup menu screen is displayed.
Turning On/Off AQUOS LINK-compatible 
Equipment
You can manually turn on/off the power of connected 
AQUOS LINK-compatible equipment.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Recorder Power On/Off”, and 
then press ENTER.
3   Select “On” (or “Off”) and press ENTER to turn on 
(or off) the equipment.
Using AQUOS LINK
One Touch Recording
This function allows easy one-touch recording of the 
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by 
simply pressing 
(REC on the remote control.
Prepare the connected AQUOS LINK-compatible 
recorder for recording. Check the following items.
•  Make sure that the antenna cable is connected.
•  Check that there is suffi cient available space on the 
recording media (HDD, DVD, etc.).
•  On the TV, use “AQUOS LINK Setup” and “Selecting 
Recorder” to select the equipment for recording.
•  By default, the recorder connected to HDMI 1 is selected 
for recording.
1 Press (REC to start recording.
•  When you are viewing a broadcast received with the 
AQUOS LINK-compatible recorder selected in "Selecting 
Recorder", recording to the AQUOS recorder of the 
broadcast being viewed starts.
•  When you are viewing a broadcast received with 
equipment other than the AQUOS LINK-compatible 
recorder selected in "Selecting Recorder" or other 
external input equipment, pressing 
(REC on the remote 
control does not start recording.
2  Use the Link Operation Menu to stop recording.
1PressOPTION to display the Link Operation 
Menu screen.
2Pressa
/
b to select “Stop Recording”, and 
then press ENTER.
Start/Stop Recording
You can also use the Link Operation Menu for 
recording on the connected AQUOS LINK-compatible 
equipment.
1 Press OPTION to display the Link Operation Menu 
screen.
2  Select “Start Recording”, and then press ENTER to 
start recording.
•  You can also start recording by pressing (REC on the 
remote control unit.
3  Select “Stop Recording”, and then press ENTER to 
stop recording.
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							
60
Using the Device Operation Panel
You can use the device operation panel to control 
playback operations.
1   Press OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Device Operation Panel”, and 
then press  ENTER.
3   Press 
a/
b /
c /
d  to select the desired operation.
•  This function works only when AQUOS LINK-compatible 
equipment with the Device Operation Panel function is 
connected.
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the 
AQUOS LINK-compatible equipment.
1   Power on the AQUOS LINK-compatible equipment, and select appropriate external input.
2   Press  OPTION  to display the Link Operation Menu 
screen.
3   Press  a/
b  to select “Play from Rec. List”, and 
then press  ENTER.
•  The title list data from the connected AQUOS LINK-
compatible equipment displays.
4   Select the title with  a/
b /
c /
d , and then press 
d
to start playback.
•  This function works only when AQUOS LINK-compatible 
equipment is connected.
Displaying the Setup Menu of AQUOS 
LINK-Compatible Equipment
You can call up a setup menu from the connected 
AQUOS LINK-compatible equipment.
1    Press OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select "Show Start Menu", and then 
press ENTER .
•  The setup menu of the AQUOS LINK-compatible  equipment is displayed.
•  Depending on the status of the equipment (recording or in 
standby mode, etc), the setup menu will not be displayed.
•  The setup menu will not be displayed with the player  BD-HP20U currently available.
Selecting Media Type for AQUOS LINK-
Compatible Recorder
You can switch the media (HDD or DVD) for playback 
or recording on the AQUOS LINK-compatible recorder.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Change Media of Device”, 
and then press  ENTER.
3Select the desired media such as HDD or DVD.
•  The Media type toggles each time you press  ENTER in 
“Change Media of Device”.
•  Select the media to be operated by the player.
Using AQUOS LINK
Timer Recording
You can call up the AQUOS LINK-compatible 
recorder’s EPG and preset timer recordings using the 
TV’s remote control.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Link Booking (Rec. Book)”, 
and then press  ENTER.
•  The recorder’s EPG is displayed.
3   Select the program to record.
•  You can use 
a/
b /
c /
d ,
ENTER ,RETURN ,EXIT  and 
the colored buttons.
•  This function works only when an AQUOS LINK-compatible  recorder is connected.
•  Refer to the operation manual of the recorder for details.
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the 
AQUOS LINK-compatible audio system and manually 
change its sound mode.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Change Audio Output 
Device”, and then press  ENTER.
3   Press 
a/
b  to select “By AQUOS audio SP”, and 
then press  ENTER.
•  The sound from the TV speaker is muted and only the 
sound from the AQUOS LINK-compatible audio system 
is audible.
•  You can use  VOL
k/
l  and 
MUTE .
Select “By AQUOS SP”, and then press  ENTER to 
listen to the TV sound.
Manually Changing AQUOS AUDIO Speaker
System’s Sound Mode
1   Press  OPTION to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “Change Surround Mode”, 
and then press  ENTER.
•  The sound mode changes each time you press  ENTER.
•  Refer to the operation manual of the AQUOS LINK- compatible audio system for details.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1   Press  OPTION  to display the Link Operation Menu 
screen.
2   Press  a/
b  to select “HDMI Device Selection”, and 
then press  ENTER.
•  A list of connected HDMI devices is displayed.
3   Press 
a/
b  to select the desired device, and then 
press ENTER .
-$-&6@&@JOEE


-$-&6@&@JOEE









 
						

							61
VIEW MODE
You can select the screen size.
1   Press VIEW MODE.
•  The View Mode menu displays.
•  The menu lists the View Mode options selectable for the type of video signal currently 
being received.
2   Press VIEW MODE or 
a/
b while the View Mode menu is displayed to select a 
desired item on the menu.
•  You can sequentially select a View Mode that has its own aspect ratio.
•  Connect the PC before making adjustments. (See page 17.)
•  Selectable screen size may vary with input signal type.
•  You can have the same settings by choosing "View Mode" on the menu items. (See page 31.)•  You may not be able to change the View Mode while in 3D mode.
Example: Screen size images
Input signalNormal Zoom Stretch Dot by Dot
4:3Keeps the original 
aspect ratio in a full 
screen display.For viewing 
widescreen
programs. The top 
and bottom of the 
image is cropped.An image fully fi lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.
Input signalStretch Dot by Dot
16:9An image fully fi lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.
Using a PC
Displaying a PC Image on the Screen
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							62
Using a PC
Example
Menu
View Option
Input Terminal Setting AQUOS LINK Setup
3D Setup
Menu Design
OtiLkOt System Options
System
Options
1   Press MENUto display the MENU screen, and then 
press
c/
d to select "System Options".
2   Press 
a/
b to select "Input Terminal Setting", and 
then press ENTER.
3   Press 
a/
b to select "PC input" or "Audio Select", 
and then press ENTER.
4   Press 
a/
b to select a specifi c adjustment item, 
and then press ENTERto set each item.
5   Press 
a/
b (or 
c/
d) to select or adjust the desired 
setting, and then press ENTER.
Adjusting the PC Image
Auto Sync. (for Analog PC Input Mode Only)
For automatically adjusting the PC image.
Yes:Auto Sync. starts and "Now adjusting the image." 
displays.
No:This function does not work.
•  When "Auto Sync." is successful, "Completed" displays. If 
not, "Auto Sync." failed.
•  "Auto Sync." may fail even if "Completed" displays.
•  "Auto Sync." may fail if the computer image has low 
resolution, has unclear (black) edges, or is moved while 
executing "Auto Sync.".
•  Be sure to connect the PC to the TV and switch it on before 
starting "Auto Sync.".
Fine Sync.
Ordinarily you can easily adjust the picture as necessary 
to change image position using "Auto Sync.". In some 
cases, however, manual adjustment is needed to 
optimize the image.
H-Pos.:Centers the image by moving it to the left or right.
V-Pos.:Centers the image by moving it up or down.
Clock:Adjust when the image fl ickers with vertical 
stripes.
Phase:Adjust when characters have low contrast or 
when the image fl ickers.
•  For resetting all "Fine Sync." adjustment items to the factory 
preset values, press 
a/
b to select "Reset", and then press 
ENTER.
•  It is not necessary to adjust the "Clock" or "Phase" when a 
digital signal is being input, so it cannot be selected.
•  The default cursor position may not be in the center, 
because the screen position variable ranges may be 
asymmetrical.
•  The screen position variable ranges depend on the View 
Mode or the signal type. The ranges can be seen on the 
position-setting screen.
Setting Audio Input
Audio Select
This function sets the terminal to output the computer 
audio.
The adjustment items vary depending on the input 
source. Select the input source corresponding to the 
terminal connected to the PC and then adjust the 
desired item.
■ PC IN
Video:Select this when the TV and PC are connected 
using an analog RGB cable and the audio is not input.
Video+Audio:Select this when the TV and PC are 
connected using an analog RGB cable and the audio is 
input via a Ø 3.5 mm stereo minijack.
■ HDMI 1HDMI(Digital):Select this when the TV and PC are 
connected using an HDMI-certifi ed cable and audio is 
input via the same cable.
HDMI+Analog:Select this when the TV and PC are 
connected using a DVI-HDMI conversion cable and the 
audio is input via a Ø 3.5 mm stereo minijack.
•  When "Audio Select" is set to "HDMI(Digital)", sound will 
not be produced if you use only an HDMI-certifi ed cable to 
connect HDMI-compatible equipment. To produce sound, 
you should make an analog audio connection.
•  If you want to connect HDMI-compatible equipment 
using only an HDMI-certifi ed cable, set "Audio Select" to 
"HDMI(Digital)".
PC Compatibility Chart
It is necessary to set the PC correctly to display XGA 
and WXGA signal. 
VGA and XGA are registered trademarks of International 
Business Machines Corp.
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz 640 x 480 720 x 400
VGA
800 x 600 SVGA
XGA 1024 x 768
WXGA 1360 x 76870 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 HzO
O
O
O
O
O
O
O O
O
O
64.0 kHz SXGA 1280 x 1024 60 Hz O
65.3 kHz SXGA+ 1400 x 1050 60 Hz O
75.0 kHz UXGA 1600 x 1200
60 Hz
67.5 kHz 1080p 1920 x 1080 60 HzO
Horizontal
FrequencyVESA
Standard ResolutionVertical
Frequency
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							63
•  The TV can be controlled from a PC, control panels 
and other devices using the RS-232C or IP.
•  Use a cross-type RS-232C cable, ETHERNET cable 
(commercially available) or wireless LAN for the 
connections.
•  This operation system should be used by a person who is 
accustomed to using computers.
■ Communication conditions for IPConnect to the TV with the following settings made for 
IP on the PC.
IP protocol:TCP/IP
Host IP address:Set the IP address on the TV menu
Service:None (Do not select Telnet or SSH)
TCP port#:Set a port number on the TV menu 
(Control port)
When you set your ID and password on the TV menu, 
you need to enter them as soon as you connect to the 
TV.
•  The connection will be cut off when there has been no 
communication for 3 minutes.
IP Control Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX®Setup Broadcasting Setup Initial SetupInitial
Setup[English]
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Initial Setup".
2 Press a
/
b to select "Internet Setup", and then 
pressENTER.
3 Press a
/
b to select "Network Setup", and then 
pressENTER.
4 Press a
/
b to select "IP Control Setup", and then 
pressENTER.
5 Press 
c/
d to select "Change", and then press 
ENTER.
6  To use IP Control, press 
c/
d to select "Enable", 
and then press ENTER.
7  Set the device name.
8  Set your login ID and password.
9  Set the port to use with IP Control.
10  Confi rm the settings, and then press "OK".
■ Communication conditions for RS-232CSet the RS-232C communication settings on the PC to 
match the TV's communication conditions.
The TV's communication settings are as follows:
Baud rate:9,600 bps
Data length:8 bits
Parity bit:None
Stop bit:1 bit
Flow control:None
■ Communication procedure Send the control commands from the PC via the RS-
232C or IP.
The TV operates according to the received command 
and sends a response message to the PC.
Do not send multiple commands at the same time. 
Wait until the PC receives the OK response before 
sending the next command.
■ Command format
Eight ASCII codes 
eCR
Command 4-digits
Parameter 4-digitsReturn code
C1 C2 C3 C4 P1  P2  P3  P4
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0–9, x, blank, ?
■ ParameterInput the parameter values, aligning left, and fi ll with 
blank(s) for the remainder. (Be sure that 4 values are 
input for the parameter.)
When the input parameter is not within an adjustable 
range, “ERR” returns. (Refer to “Response code format”.)
Any numerical value can replace the “x” on the table.
a30 0009
0???? ?
When “?” is input for some 
commands, the 
present setting 
value responds.
■ Response code format
Normal response
Return code (0DH)
Return code (0DH) Problem response (communication 
error or incorrect command)
OKERR
Control of the TV
Using a PC
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							64
■ Command table•  Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMANDPARAMETERCONTROL CONTENTS
POWER ON COMMAND SETTING
POWER SETTINGThe Power On command rejected.
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the 
signal type. The ranges can be seen on the position-setting screen.
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input. 
    [AV] Only available when 1080i/p is being input.
9: Only available when 720p is being input.
10, 11: Available when USB-Video, DLNA-Video or Internet application is used. (Toggle)
0: (Toggle), 1:  STANDARD, 2: MOVIE , 3: GAME, 
4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC, 
8: x.v. Color, 14: STANDARD (3D), 15: MOVIE (3D), 
16: GAME (3D), 100: AUTO
Volume (0–60)
Only PC mode. (0–180)
Only PC mode. (0–40)
0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]
3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]
6: Zoom [PC], 7: Stretch [PC], 
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]
10:
Auto [USB-Video, DLNA-Video or Internet applications],11:Original [USB-Video, DLNA-Video or Internet applications]
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
If it is not TV display, it will input-switch to TV. (same function as CHU)
If it is not TV display, it will input-switch to TV. (same function as CHV)
Toggle operation of a closed caption. 0: (Toggle), 1: Normal, 2: Off, 4: 3D Hall, 5: 3D Movie, 
6: 3D Standard
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN., 
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
The channel number of TV
The channel number of TV +1
The channel number of TV–1(Toggle) (1–135) RSPW
ITGD
ITVD
IAVD INPUT SELECTION TOGGLE
AV MODE SELECTION
VOLUME
POSITION
VIEW MODE
SURROUND
SLEEP TIMER
CHANNEL
CCDIRECT
(ANALOG)
(DIGITAL)
CH UP
CH DOWN CHANNEL H-POSITION H-POSITION
V-POSITION
CLOCK
PHASEAVMD
VOLM
HPOS
VPOS
CLCK
PHS E
ACSU
OF TM
DCCH
CHUP
CHDW
CLCP WI DE0
x
0
*
*
*
*
*
*
*
*
*
*
x
x
x*
*
_
_
_ _
_ _*
*
*
*
* _
_
_
_
_
*
_
_
_ _
_ _*
*
*
* _ _
_
_
_
_
_
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit) (0100-9999)
(1-999)
(0-999)
(0-9999)
(0-6383)DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
DIRECT
CHANNELDA 2 P * * * *
DC 2 U * * * _
DC 2 L * * * _
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000) DC 1 0 * * * *
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000) DC 1 1 * * * *
_
_
_
The device name set in "IP Control Setup" is displayed. DEVICE NAME
TVNM1 _ _ _
The model name of the TV MODEL NAME
MN R D 1 _ _ _
The current version of the TV software is displayed. SOFTWARE VERSION
SWV N 1 _ _ _
The currently supported version of IP protocol is displayed.
IP PROTOCOL VERSION
IPPV1____
(Toggle) AUDIO SELECTION
ACHA x _ _ _
_0: (Toggle), 1: On, 2: Off MUTE
MU T E * _ _ __ _
_
_
_ _ _Off
The Power On command accepted. 1 _ _ _ On [RS-232C]
The Power On command accepted.
When the power is in standby mode, commands also go to waiting status 
and so power consumption is just about the same as usual. With the 
commands in waiting status, the Center Icon Illumination on the front of the 
TV lights up. 2 _ _ _ On [IP]
Power On 1 _ _ _ Power OnIt shifts to standby. P O W R 0 _ _ _ Power Off
_
_
_
_ TV
1-7
3D
0: 3D Off
1: 2D➝3D
2: SBS
3: TAB
4: 3D➝2D (SBS)
5: 3D➝2D (TAB)
6: 3D auto
7: 2D auto TDCH * _ _ _1: HDMI 1, 2: HDMI 2, 3: HDMI 3, 4: HDMI 4, 
5: COMPONENT, 6: VIDEO 1, 7: VIDEO 2
•  If an underbar (_) appears in the parameter column, enter a space.
•  If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
•  Any numerical value can replace the “x” on the table.
Using a PC
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							65
Using the Internet
By connecting your TV to a broadband system, you can access the Internet from the TV.
•  Display the latest Internet information and access a range of useful information for AQUOS users from the 
original home page*.
•  Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support.
•  You can enjoy a variety of streaming content and Internet applications.
•  You may not be able to view 3D images when accessing the Internet.
*About the original home page
•  The original home page is a website set up specifi cally for AQUOS owners. 
•  The website is worth visiting as it provides a range of useful information, including tips on using your AQUOS 
and a frequently asked questions section.
Connecting to the Internet
•  To connect your TV to the Internet, you must have a broadband Internet connection.
•  If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your 
Internet service provider or telephone company.
•  When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same time. 
Use only one of the connection types. (See page 67.)
+Using an ETHERNET cable
Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband 
router (commercially available).
ETHERNET cable
Internet ModemPC
LAN
Broadband router
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							66
+Using the wireless LAN
This TV is equipped with a wireless LAN function.
For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 67.)
Internet ModemPC
Wireless LAN router/
access point
•  This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications 
that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter.
•  This TV has received the following certifi cations.
- Wi-Fi CERTIFIED™ (certifi cation program from the Wi-Fi Alliance
®)
- Wi-Fi Protected Setup™ (certifi cation program from the Wi-Fi Alliance®)
•  Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certifi cation.
•  A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation 
manual of your access point for setup.
•  If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a 
connection. In this case, disable the stealth mode on the access point.
•  A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the 
wireless LAN signal may be poor or drop, or the connection speed may become slower.
- When used in buildings made with concrete, reinforced steel, or metal
- When placed near objects that obstruct the signal
- When used with other wireless devices that emit the same frequency
- When used in the vicinity of microwave ovens and other devices that emit a magnetic fi eld, electrostatic charge, or 
electromagnetic interference
•  When there is signifi cant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth
® devices, 
2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that 
supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of 
your access point.
•  For users outside the United States, be sure to select your country before using the wireless LAN function. (See page 68.)
•  A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed 
is unstable.
•  Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings.
•  Please follow the legislation in your country when using the wireless LAN outdoors.
Using the Internet
-$-&6@&JOEC


-$-&6@&JOEC









 
						

							
67
Internet Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX®Setup
Broadcasting Setup
Initial Setup
Initial
Setup[English]
Connection Type
1 Press 
MENU to display the MENU screen, and then 
press c/
d  to select "Initial Setup".
2 Press  a
/b  to select "Internet Setup", and then 
press ENTER .
3 Press a
/b  to select "Network Setup", and then 
press ENTER .
4 Press a
/b  to select "Connection Type", and then 
press ENTER .
5 Press 
c/
d  to select "Wired" or "Wireless", and 
then press  ENTER.
•  If you select "Wired", the signal is detected and setup 
is performed automatically. Use "IP Setup" to check 
and change the settings as necessary. (See page 68.)
•  If you select "Wireless", use "Wireless Setup" to  confi gure the access point settings. 
Wireless Setup
If your access point supports Wi-Fi Protected Setup 
(WPS), it is recommended that you use this function 
for the wireless connection. You can press the WPS 
button on the access point to confi gure the settings 
automatically.
•  The name of the WPS button function may differ depending  on the access point. See the operation manual of the 
access point for details.
1  Confi rm the current settings in "Connection Type".
•  If "Wired" is selected, press  c/
d  to select "Wireless".
2 Press  a
/b  to select "Wireless Setup", and then 
press ENTER .
•  Confi rm the settings. If each setting item is correct, 
press MENU  to exit.
•  If you are confi guring the wireless setup for the fi rst  time or changing the settings, go to step 3.
3 Press  c/
d  to select "Change", and then press 
ENTER .
4 Press a
/b  to select "WPS", and then press 
ENTER .
•  To select and register an access point manually, select 
"Search" or "Manual Setup" and make the necessary 
settings.
5 Press  a
/b  to select "Push button", and then press 
ENTER .
•  To confi gure the setting via PC, select "PIN code". 
Follow the on-screen instructions and the operation 
manual of the access point to confi gure the settings.
6  Select "Next" to complete the settings. 
•  The connection process starts and the WPS button on the access point can be pressed.
7  Press the WPS button on the access point.
•  Pressing the WPS button displays a confi rmation screen. Please wait until a connection is established.
8  When a connection is established, the connection 
details are displayed. Press  ENTER.
Interactive Service
If you do not want other people to connect to the 
Internet in your absence, you can make settings to 
keep the TV away from the Internet.
1 Press MENU to display the MENU screen, and then 
press c/
d  to select “Initial Setup”.
2 Press  a
/b  to select “Internet Setup”, and then 
press ENTER .
3 Press a
/b  to select “Interactive Service”, and then 
press ENTER .
•  Input the 4-digit secret number by using 0-9.
4 Press 
c/
d  to select “No”, and then press 
ENTER.
•  If you want to allow Internet connection, select “Yes”, 
and then press ENTER.
5 Press  MENU to exit.
Checking Your Internet Connection
1 Press  APPS to display the application window.
2 Press  a
/b /
c /
d  to select "AQUOS NET" and then 
press ENTER .
• If "" is displayed after you connect to the Internet, 
check your TV's network settings and connection.
•  You can also display the AQUOS NET screen by  pressing FAV APP  on the remote control unit. See 
page 35 for details on the FAV APP key Assign 
function.
3 Press  APPS and select "AQUOS NET" once or 
twice to switch to the TV + Web or Web screen.
•  When the original home page appears, now you are 
connected to the Internet.
•  If you have failed to connect to the Internet in the above 
operation, then an error message will appear. In this case, 
press EXIT to exit from the connected TV feature to make 
changes to the network settings (see page 68).
•  If you still cannot connect to the Internet, please consult  your Internet service provider or telephone company.
•  When an application is used, you cannot make settings for  "Internet Setup".
If you need to make the settings of "Internet Setup", press 
EXIT  to exit from the connected TV feature.
Using the Internet
-$-&6@&@JOEE


-$-&6@&@JOEE









 
						

							
68
Using the Internet
+If you cannot connect to the Internet
Perform the procedures below to check your TV's 
network settings.
IP Setup
1 Press  EXIT to exit from the connected TV feature.
2 Press  MENU to display the MENU screen, and then 
press c/
d  to select “Initial Setup”.
3 Press  a
/b  to select “Internet Setup”, and then 
press ENTER .
4 Press a
/b  to select “Network Setup”, and then 
press ENTER .
5 Press a
/b  to select “IP Setup”, and then press 
ENTER .
•  Check that numbers are displayed for each setting.
•  If there are any settings without numbers, specify the 
numbers by following the on-screen instructions.
•  For information on how to enter text, see page 69.
Example
InitializeChange
IP Address  :  Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : No Use
MAC Address  :  XX:XX:XX:XX:XX:XX Setting IP information
[Current Setup]
6Press MENU  to exit.
Setting the Country
1  Repeat steps 1 to 4 in  IP Setup.
2 Press a
/b  to select "Country", and then press 
ENTER .
3 Press a
/b  to select "US", "Canada", "Mexico" or 
"Others", and then press  ENTER.
•  If you select “Others”, you need to set the desired area.
4 Press MENU to exit.
Setting the Zip Code
1  Repeat steps 1 to 4 in  IP Setup.
2 Press a
/b  to select “Zip Code”, and then press 
ENTER . After “Change” is highlighted, press 
ENTER  again.
3  Enter your zip code.
• Use 0-9 on the remote control unit, or use the software 
keyboard.
4  After “Complete” is highlighted, press  ENTER.
5 Press MENU to exit.
Displaying Updated Information and 
Support Service
This function can be used to display up-to-date 
information on the original home page and allow you to 
receive support service over the network.
Original Home Page
1 Press  APPS to display the application window.
2 Press 
c/
d  to select "AQUOS NET" and then press 
ENTER .
•  You can also display the original home page by 
pressing FAV APP  on the remote control unit. See 
page 35 for details on the FAV APP key Assign 
function.
•  Each time you select "AQUOS NET" from the  application window or press  FAV APP, the screen 
image toggles as shown below:
TV+Web      Web      TV
•  When you are not connected to the Internet, a network  function explanation screen is displayed.
The services displayed vary depending on circumstances.
3 Press  a
/b /c
/d
 to select a title, and then press 
ENTER .
•  The service details vary depending on circumstances.
4PressEXIT to exit from the connected TV feature.
•  Web page appearances may differ depending on the type 
of screen (TV+Web or Web).
•  When displaying TV+Web with a channel in which the  V-Chip is enabled, the cursor keys on the remote control 
unit do not function.
AQUOS Advantage Live
1 Press  APPS to display the application window.
2 Press 
c/
d to select “AQUOS ADVANTAGE LIVE”, 
and then press  ENTER.
•  You can also display the AQUOS ADVANTAGE LIVE 
screen by pressing  FAV APP on the remote control 
unit. See page 35 for details on the FAV APP Key 
Assign function.
3 Press  a
/b /
c /
d  to select the desired service.
4 Press 
EXIT to exit from the connected TV feature.
•  The display may change as a result of a software update.
-$-&6@&@JOEE


-$-&6@&@JOEE