Sharp Aquos Lc 70le735u Operation Manual

LC-70LE735U  OPERATION MANUAL  MODE D'EMPLOI  MANUAL DE OPERACIÓN
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-F207WJZZ
11P07-MX-NM
ENGLISH FRANÇAIS ESPAÑOL
IMPORTANT  :  Please read this operation manual before starting operating the equipment.
IMPORTANT  :  Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE  :  Lea este manual de operación antes de...

Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
Dimensional Drawings
153/4 (400)7
31/64 (190)
153/4 (400)
217/64 (536)
343/32
(865.62)
*1
6019/32 (1538.88)*1
631/2 (1613)
3945/64 (1008)
38
25/64 (975)
213/16 (538)
AN-52AG4
525/64(137)13
1/8 (333)
21/64 (51)*2
31/2 (89)
523/64(136)
109/32 (261)
38
9/32 (972)
759/64(201)5°
41/2
(114)
815/32 (215)
*1  Active area/Área activa/Zone active*2  Thinnest part/Parte más delgada/Partie la plus mince...

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: 
The lightning flash with arrow-head 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product's 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a 
triangle is intended to alert the user 
to the presence of important 
operating and...

INFORMATION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference...

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage 
if improperly handled. This product has been engineered and manufactured with the highest priority on safety. 
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please 
observe the following instructions when installing, operating and cleaning the product. To ensure your safety 
and prolong the service life of your Liquid Crystal Television,...

IMPORTANT SAFETY INSTRUCTIONS
4
•  Outdoor Antenna Grounding — If an outside antenna is 
connected to the television equipment, be sure the antenna 
system is grounded so as to provide some protection against 
voltage surges and built-up static charges.
  Article 810 of the National Electrical Code, ANSI/NFPA 70, 
provides information with regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location...

IMPORTANT SAFETY INSTRUCTIONS
5
Caring for the front panel
•  Turn off the main power and unplug the AC cord from the wall outlet before handling.
•  Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.).
  To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry 
sheet type cloth, etc.). This may damage the surface of the front panel.
•  Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
•...

6
3D Glasses
Prevention of accidental ingestion
•  Keep the accessory out of the reach of small children. Small children ca\
n accidentally swallow these parts.–  If a child accidentally swallows any of these parts, seek immediate medi\
cal attention.
Do not disassemble
•  Do not disassemble or modify the 3D Glasses except when recycling the ba\
tteries. Do not modify the 3D glasses.
Handling the 3D Glasses
•  Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may \
damage the glass...

7
Contents
IMPORTANT INFORMATION ..................... 1
DEAR SHARP CUSTOMER  ....................... 3
IMPORTANT SAFETY INSTRUCTIONS  ........ 3-6
Supplied Accessories  ............................ 8
QUICK REFERENCE Attaching the Stand  ............................ 8
QUICK INSTALLATION TIPS  ................... 9
Experiencing HD Images  ....................... 9
Using the Remote Control Unit  ................. 9
Preparation Antennas  ...................................... 10
Installing Batteries in the...

8
1Confi rm that there are 12 screws (8 long screws 
and 4 short screws) supplied with the stand unit.
21Set the post for the stand unit onto the box.
2Attach the base to the post.
3Insert and tighten the 8 screws into the 8 holes 
on the bottom of the base.
•  Hold the stand unit securely with one hand, and then 
tighten the screws.
FRONT
2
2
1
1
1
Long
screws
3Insert the stand into the openings on the rear of the TV.
•  Make sure that the stand is fi rmly inserted into the TV. 
Improper installation may...