Schwinn 170 Journey 15 Manual

							170
ASSEMBLY MANUAL / OWNER’S MANUAL  
Manual en Espa\361ol Latino 
004B005700570053001D00120012005A005A005A  
						

							2
Important Safety Instructions 3
  Safety Warning Labels / Serial Number  5
Specifications	 6
Before	 Assembly	 6
Parts 7
Hardware  8
Tools 8
Assembly 9
Leveling the Bike  15
Moving the Bike  15
Features	 16
  Console Features  17
 Bluetooth
® Connectivity  20
  Virtual Reality Experience on   
  Your Fitness Machine  21
   Remote Heart Rate Monitor  22Operations 
24
 Adjustments  24
  Initial Setup  24
  Quick Start / Manual Program  25
	 User	Profiles	 25
	 Profile	Programs	 27
  Pausing or Stopping  30
 Results  30
  GOAL TRACK Statistics  30
Console Setup Mode  32
Maintenance  33
Troubleshooting  35
Warranty 39
TABLE OF CONTENTS
To validate warranty support, keep the original proof of purchase and rec\
ord the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to:  www.SchwinnFitness.com/register
Or	call	1	(800)	605–3369.
If	you	have	questions	or	problems	with	your	product,	please	call	1	(800)	NAUTILUS	(628–8458)
Or	go	to:	www.SchwinnFitness.com
Nautilus,	Inc.,	 (800)	NAUTILUS	 /	(800)	 628-8458,	www.NautilusInc.com	-	 Customer	Service:	North	America	(800)	 605-3369,	csnls@nautilus.
com	|	outside	U.S.	www.nautilusinternational.com	|	©	2016	Nautilus,	Inc.	|	®	indicates	trademarks	registered	in	the	United	States.	 These	
marks	may	be	registered	in	other	nations	or	otherwise	protected	by	common	law.	Schwinn,	the	Schwinn	Quality	logo,	Schwinn	170,	Schwinn	
Connect,	Bowflex,	Nautilus,	and	Universal	are	trademarks	owned	by	or	licensed	to	Nautilus,	Inc.	Polar®,	OwnCode®,	iTunes®,	Google	
Play™,	Under	 Armour®,	MyFitnessPal®,	iOS®	and	 Android™	are	trademarks	of	their	respective	owners.	 The	Bluetooth®	word	mark	and	
logos	are	registered	trademarks	owned	by	Bluetooth	SIG,	Inc.,	and	any	use	of	such	marks	by	Nautilus,	Inc.	is	under	license.	  
						

							3
IMPORTANT SAFETY INSTRUCTIONS
!This icon means a potentially hazardous situation which, if not avoided,\
 could result in death or serious 
injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
•	 Keep	bystanders	and	children	away	from	the	product	you	are	assembling	at	all	times.
•	 Do	not	connect	power	supply	to	the	machine	until	instructed	to	do	so.
•	 Do	not	assemble	this	machine	outdoors	or	in	a	wet	or	moist	location.
•	 Make	sure	assembly	is	done	in	an	appropriate	work	space	away	from	foot	traffic	and	exposure	to	bystanders.
•	 Some	components	of	the	machine	can	be	heavy	or	awkward.	Use	a	second	person	when	doing	the	assembly	 steps	involving	these	parts.	Do	not	do	steps	that	involve	heavy	lifting	or	awkward	movements	on	your	own.
•	 Set	up	this	machine	on	a	solid,	level,	horizontal	surface.
•	 Do	not	try	to	change	the	design	or	functionality	of	this	machine.	 This	could	compromise	the	safety	of	this	machine	
and	will	void	the	warranty.
•	 If	replacement	parts	are	necessary,	use	only	genuine	Nautilus	replacement	parts	and	hardware.	Failure	to	use	 genuine replacement parts can cause a risk to users, keep the machine fr\
om operating correctly and void the 
warranty.
•  Do not use until the machine has been fully assembled and inspected for \
correct performance in accordance with 
the	Manual.
•	 Read	and	understand	the	complete	Manual	supplied	with	this	machine	before	first	use.	Keep	the	Manual	for	future	 reference.
•	 Do	all	assembly	steps	in	the	sequence	given.	Incorrect	assembly	can	lead	to	injury	or	incorrect	function.
•	 This	product	contains	magnets.	Magnetic	fields	can	interfere	with	the	normal	use	of	certain	medical	devices	at	 a	close	range.	Users	may	come	into	proximity	of	the	magnets	in	the	assembly,	maintenance,	and/or	use	of	the	
product.	Given	the	obvious	importance	of	these	devices,	such	as	a	pacemaker,	it	is	important	that	you	consult	with	
your	medical	provider	in	connection	with	the	use	of	this	equipment.	Please	consult	the	“Safety	Warning	Labels	
and	Serial	Number”	section	to	determine	the	location	of	the	magnets	on	this	product.
Before using this equipment, obey the following warnings:
!Read and understand the complete Manual. Keep the Manual for future refe\
rence.
  Read and understand all warnings on this machine. If at any time the Warning labels become loose, 
unreadable or dislodged, contact Nautilus Customer Service for replaceme\
nt labels.
•	 Children	must	not	be	let	on	or	near	to	this	machine.	Moving	parts	and	other	features	of	the	machine	can	be	 dangerous	to	children.
•	 Not	intended	for	use	by	anyone	under	13	years	of	age.
•	 Consult	a	physician	before	you	start	an	exercise	program.	Stop	exercising	if	you	feel	pain	or	tightness	in	your	 chest,	become	short	of	breath,	or	feel	faint.	Contact	your	doctor	before	you	use	the	machine	again.	Use	the	
values	calculated	or	measured	by	the	machine’s	computer	for	reference	purposes	only.
•	 Before	each	use,	examine	this	machine	for	loose	parts	or	signs	of	wear.	Do	not	use	if	found	in	this	condition.	 Monitor	the	Seat,	Pedals,	and	Crank	 Arms	closely.	Contact	Nautilus	Customer	Service	for	repair	information.
•	 Maximum	user	weight	limit:	300	lbs.	(136	kg).	Do	not	use	if	you	are	over	this	weight.
•	 This	machine	is	for	home	use	only.
•	 Do	not	wear	loose	clothing	or	jewelry.	 This	machine	contains	moving	parts.	Do	not	put	fingers	or	other	objects	into	
moving	parts	of	the	exercise	equipment.  
						

							4
•	 Set	up	and	operate	this	machine	on	a	solid,	level,	horizontal	surface.
•	 Make	the	Pedals	stable	before	you	step	on	them.	Use	caution	when	you	step	on	and	off	the	machine.
•	 Disconnect	all	power	before	servicing	this	machine.
•	 Do	not	operate	this	machine	outdoors	or	in	moist	or	wet	locations.	Keep	the	foot	pedals	clean	and	dry.
•	 Keep	at	least	24”	(0.6	m)	on	each	side	of	the	machine	clear.	This	is	the	recommended	safe	distance	for	access	
and	passage	around	and	emergency	dismounts	from	the	machine.	Keep	third	parties	out	of	this	space	when	
machine	is	in	use.
•	 Do	not	over	exert	yourself	during	exercise.	Operate	the	machine	in	the	manner	described	in	this	manual.
•	 Correctly	adjust	and	safely	engage	all	Positional	 Adjustment	Devices.	Make	sure	that	the	Adjustment	Devices	do	
not	hit	the	user.
•	 Exercise	on	this	machine	requires	coordination	and	balance.	Be	sure	to	anticipate	that	changes	in	speed	and	 resistance	level	can	occur	during	workouts,	and	be	attentive	in	order	to	avoid	loss	of	balance	and	possible	injury.
•	 Prior	to	use,	read	and	understand	the	owner’s	manual.	 The	appliance	is	not	to	be	used	by	persons	with	functional	
limitations and impairments, reduced physical, sensory or mental capabil\
ities, or lack of experience and 
knowledge.	  
						

							5
SAFETY WARNING LABELS AND SERIAL NUMBER
FCC Compliance
!Changes	or	modifications	to	this	unit	not	expressly	approved	by	the	party	responsible	for	compliance	could	void	
the	user’s	authority	to	operate	the	equipment.
The	machine	and	power	supply	comply	with	part	15	of	the	FCC	rules.	Operation	is	subject	to	the	following	two	
conditions: (1) This device may not cause harmful interference, and (2) this device mu\
st accept any interference 
received,	including	interference	that	may	cause	undesired	operation.
Note:     This machine and power supply have been tested and found to comply with \
the limits for a Class B digital 
device,	pursuant	to	Part	15	of	the	FCC	Rules.	 These	limits	are	designed	to	provide	reasonable	protection	
against	harmful	interference	in	a	residential	installation.	 This	equipment	generates,	uses	and	can	radiate	
radio frequency energy and, if not installed and used in accordance with\
 the instructions, may cause harmful 
interference	to	radio	communications.
However,	there	is	no	guarantee	that	interference	will	not	occur	in	a	particular	installation.	If	this	equipment	does	
cause	harmful	interference	to	radio	or	television	reception,	which	can	be	determined	by	turning	the	equipment	off	and	
on, the user is encouraged to try to correct the interference by one or \
more of the following measures:
•		Reorient	or	relocate	the	receiving	antenna.
•		Increase	the	separation	between	the	equipment	and	receiver.
•			 Connect	the	equipment	into	an	outlet	on	a	circuit	different	from	that	to	which	the	receiver	is	connected.
•			 Consult	the	dealer	or	an	experienced	radio/TV	technician	for	help.
Serial number
Product 
specification
WARNING!
•  Injury or death is possible if 
caution is not used while using 
this	machine.
•	Keep	children	and	pets	away.
•   Read and follow all warnings on 
this	machine.
•   Refer to the Owner’s Manual for 
additional warnings and safety 
information.
•    The heart rate displayed is an 
approximation and should be 
used	for	reference	only.
•   Not intended for use by anyone 
under	13	years	of	age.
•    The maximum user weight for 
this	machine	is	300	lbs	(	136kg	).
•    This machine is for home use 
only.  
						

							6
SPECIFICATIONS
41.3” (105cm)21.4” (54cm)55.6” (141cm)
Before Assembly 
Select	the	area	where	you	are	going	to	set	up	and	operate	your	machine.	For	safe	operation,	the	location	must	be	on	
a	hard,	level	surface.	Allow	a	workout	area	of	a	minimum	90”	x	70”	(2.3m	x	1.8m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1.			
Read	and	understand	the	“Important	Safety	Instructions”	before	assembly.
2.			 Collect	all	the	pieces	necessary	for	each	assembly	step.
3.			 Using	the	recommended	wrenches,	turn	the	bolts	and	nuts	to	the	right	(clockwise)	to	tighten,	and	the	left	(counter -
clockwise)	to	loosen,	unless	instructed	otherwise.
4.			 When	attaching	2	pieces,	gently	lift	and	look	through	the	bolt	holes	to	help	insert	the	bolt	through	the	holes.
5.		 The	assembly	can	require	2	people.
Maximum User Weight:		 300	lbs.	(136	kg)
Power Requirements: 
 
Operational Voltage:   9VDC
	 Operating	Current:	 1.5A
Regulatory Approvals:
	 	 AC	Power	 Adapter:		
UL	listed,	CSA 	certified	(or	
equivalent),	Rated	120V	60Hz	Input,	
9VDC,	1500mA 	Output.	Class	2.
Connectivity:
 
WARNING:  This product, its packaging, and components 
contain chemicals known to the State of California to cause 
cancer,	birth	defects,	or	reproductive	harm.	 This	Notice	is	
provided	in	accordance	with	California’s	Proposition	65.	If	
you would like additional information, please refer to our 
website	at	www.nautilus.com/prop65.  
						

							7
PARTS
ItemQtyDescription ItemQtyDescription
1 1Main Frame 91Seat Post
2 1Front Stabilizer 101Adjustment Knob
3 1Rear  Stabilizer 111Seat
4 1Top Shroud 121Left Pedal (L)
5 1Mast Gasket 131Right Pedal (R)
6 1Console  Mast (with Handlebar Mount)  141Water Bottle Holder
7 1Handlebars 151AC Adapter
8 1Console 161Handlebar Mount Cover
  Note:			Media	Cable	is	in	a	bag.
12 (L) 13 (R)11
7
1
2 4
8
5
14
3
9
15
10
616  
						

							8
HARDWARE / TOOLSTo o l s
Included        Not Included
6	mm (recommended)
Item
QtyDescription
A 4Button Head Hex Screw M8 x 25
B 5Lock Washer M8
C 4Curved Washer M8
D 1Flat Washer M8
E 1T-handle
Note:    Select pieces of Hardware have been provided as spares on the 
Hardware	Card.	Be	aware	that	there	may	be	remaining	Hardware	
after	the	proper	assembly	of	your	machine.
D E  
						

							9
ASSEMBLY
1.  Attach Stabilizers to Main Frame
 
Note:			Hardware(*)	is	pre-installed	on	the	stabilizers	and	not	on	Hardware	Card.	Make	sure	transport	wheels	on	the 	
front stabilizer point forward, and the Schwinn®	decal	on	the	rear	stabilizer	faces	outward	from	the	machine.
2.  Install Console Mast, Mast Gasket and Top Shroud on Main Assembly
 NOTICE: 			Make	sure	the	Console	Cable	connector	(a)	does	not	fall	into	the	Console	Mast.	Align	the	clips	on	the	cable 	
connectors	and	make	sure	the	connectors	lock.	Do	not	crimp	Console	Cable.	Be	sure	the	tabs	on	the	Top 	
Shroud	snap	into	the	Main	Assembly.
X2X2
6 mm6 mm
*
*
* *
*
*
6
5 4
A
6 mmCB
X4
a  
						

							10 3. Install Handlebars on Console Mast
  NOTICE: 			Do	not	crimp	the	cables.	Put	the	Handlebar	(7)	in	the	bracket	(6a),	adjust	the	Handlebar	to	the	desired 	
angle,	and	install	the	T-handle	(E)	through	the	holes.	Use	the	pull	cable	in	the	Handlebar	Mount	to	route 	
the	HR	cable	(7a)	through	the	slot	(6c)	under	the	Handlebar	Mount	to	the	top	of	the	mast.	Fully	tighten 	
the 	T-handle 	to 	keep 	the 	Handlebar 	in 	position. 	Push 	the 	cover 	(16) 	into 	position 	on 	the 	Handlebar 	Mount.
7
6a
16
E
6a
E
D
B
7
6a
D
B7a
E
7a
7 6c