Schwinn 170 Journey 15 Manual

31
c.)		
TIME	(average),	DISTANCE	(average)	/	or	LEVEL 	(average)	*, and CALORIES (average)
   *		If	the	Goal	 Track	Statistic	is	a	single	workout,	LEVEL 	(average)	is	displayed.	If	the	Goal	Track	Statistic	is	a	
combination	of	multiple	workouts,	DISTANCE	(average)	is	displayed	instead	of	LEVEL 	(average).	
To	view	the	GOAL 	TRACK	statistics	of	a	User	Profile:
1.	 	
From	the	Power-Up	screen,	push	the	User button to select	a	User	Profile.
2.	 	
Push	the	GOAL TRACK button.	The	Console	will	display	the	LAST...

32
The Console Setup Mode lets you input the date and time, set the units o\
f measurement to either English or Metric, 
change	the	machine	type,	control	the	sound	settings	(	on/	off),	or	see	maintenance	statistics	(Error	Log	and	Run	Hours	–	
for	service	technician	use	only).
1.		 Hold	down	the	PAUSE/END	button	and	Right	button	together	for	3	seconds	while	in	the	Power-Up	Mode	to	go	into	
the	Console	Setup	Mode.
  Note:		Push	PAUSE/END	to	exit	the	Console	Setup	Mode	and	return	to	the	Power-Up	Mode...

33
Read	all	maintenance	instructions	fully	before	you	start	any	repair	work.	In	some	conditions,	an	assistant	is	necessary	to	
do	the	necessary	tasks.
!Equipment must be regularly examined for damage and repairs. The owner is resp\
onsible to make sure that 
regular maintenance is done. Worn, damaged or loose components must be repaired or replaced immedi-
ately. Only manufacturer supplied components can be used to maintain and repa\
ir the equipment.
  If at any time the Warning labels become loose,...

34
A
B
C
C
D
E
F
G H
J K
I
M
R QN
O
P
S T
U V J
D
X
W
AA
Y
Z
CC
BB
DD
EEA
J L
A Console LHR Cables WFlywheel
B Console Mast MCHR Sensors XBrake Assembly
C Pedals NSeat YRPM Sensor
D Crank Arms OSeat Post w/ Slider ZSpeed Sensor Magnets (8)
E Left Shroud PAdjustment Knob AAServo Motor
F Power Inlet QSeat Post Shroud BBDrive Belt
G Right Shroud RWater Bottle Holder CCDrive Pulley
H Top Shroud SRear Stabilizer DDHandlebar Mount Cover
I Mast Gasket TLevelers EET-handle
J Data Cable UFront Stabilizer
K...

35
TROUBLESHOOTING
Condition/ProblemThings to Check Solution
No display/partial display/
unit will not turn on Check electrical (wall) 
outlet Make	sure	unit	is	plugged	into	a	functioning	wall	outlet.
Check connection on 
console Connection	should	be	secure	and	undamaged.	Replace	
adapter	or	connection	at	unit	if	either	are	damaged.
Check data cable integrity All	wires	in	cable	should	be	intact.	If	any	are	visibly	crimped	or	
cut,	replace	cable.
Check data cable 
connections/orientation Be	sure	cable	is...

36
Condition/ProblemThings to Check Solution
No speed/RPM reading, 
Console	displays	“Please	
Pedal” error code Check data cable integrity
All	wires	in	cable	should	be	intact.	If	any	are	cut	or	crimped,	
replace	cable.
Check data cable
connections/orientation Be	sure	cable	is	connected	securely	and	oriented	properly.	
Small	latch	on	connector	should	line	up	and	snap	into	place.
Check magnet position 
(requires shroud removal) Magnets	should	be	in	place	on	pulley.	
Check Speed Sensor 
(requires shroud...

37
Condition/ProblemThings to Check Solution
Clicking sound when 
pedaling Check pedal to crank arm 
connection Remove	pedals.	Make	sure	there	is	no	debris	on	threads,	and	
reinstall the pedals
Seat post movement Check locking pin Be sure adjustment pin is locked into one of the seat post 
adjustment	holes.
Check adjustment knob Be	sure	knob	is	securely	tightened.  

38  

39
WARRANTY
Who Is Covered
This warranty is valid only to the original purchaser and is not transfe\
rable or applicable to any other person(s).
What Is Covered
Nautilus, Inc. warrants that this product is free from defects in materi\
als and workmanship, when used for the purpose intended, under normal co\
nditions, and provided it receives proper care and 
maintenance as described in the Product’s Assembly and Owner’s manual.  This warranty is good only for authentic, original, legitimate machines \...

8011554.030117.B
EN
Nautilus\256Bowex\256Schwinn\256Universal\256