Sanyo Vpc T850 Instruction Manual

EN-10
INTRODUCTION
Overview
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital images is fast and easy with this state-of-the-art smart
camera. Equipped with a 8.1-megapixel CCD, this camera is capable of capturing
images with a resolution of up to 3264 x 2448 pixels.
Package Contents
Carefully unpack your camera and ensure that you have the following items:
Common Product Components:
„Digital Camera
„ Software CD-ROM
„ USB cable
„ AV  c a b l e
„ Camera strap
„...

EN-11
GETTING TO KNOW YOUR CAMERA
Front View
1. Shutter button
2. Flash
3. Power button
4. Status LED
5. Microphone
6. Lens
7. Self-timer LED
8. Zoom lever
Downloaded From camera-usermanual.com Sanyo Manuals 

EN-12
Rear View
1. LCD monitor
2.  Mode button
3.  Menu button
4. Direction button
S     button
Focus button
X      button
Flash button
T      button
Self-timer buttonDelete button
W      button
Backlight / Exposure 
compensation button
5. Strap holder
6. USB or AV OUT terminal
7.  Set button   Display button
8.  Playback button
9. Battery / Memory card cover
10. Tripod socket
11. Speaker
Downloaded From camera-usermanual.com Sanyo Manuals 

EN-13
LCD Monitor Display
Capture mode
1. Zoom status2. Voice memo3. Battery condition[ ]    Full battery power
[ ]    Medium battery power
[ ]    Low battery power
[ ]    No battery power
4. Flash  mode[Blank]Auto Flash
[ ]   Red-eye Reduction
[]   Pre-flash
[ ]   Forced Flash
[ ]   Flash Off
5. Storage media[ ]  Internal memory (no card)
[ ]  SD/SDHC memory card
6. [ ] Histogram7. Main focus area (When the shutter
button is pressed halfway)
8. Image quality
     [ ]  Fine
     [ ]  Standard
     [ ]...

EN-14
Video mode []1. Zoom status
2. Flash mode
3. Battery condition
4. Storage media
5. Main focus area
6. Video quality
7. Video resolution
8.
Available recording time/Elapsed time9. Self-timer icon
10. Date and time
11. Focus setting
12. Mode icon
Playback mode  []  -  Still image playback1. Voice memo
2. Battery condition
3. Storage media
4. Histogram
5. ISO
6. Image quality
7. Image size resolution
8. File number
9. Folder number
10. Date and time
11. Exposure value
12. Aperture value
13. Shutter...

EN-15
GETTING START
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation asshown.
4. Insert an SD/SDHC memory card (Optional).  „
The camera has 32MB internal memory (28MB
available for image storage), but you can load an
SD/SDHC memory card to  expand the camera’s
memory capacity.
„ Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/memory card cover and make sure it
is...

EN-16
Charging the Battery
Charge the battery fully with the supplied battery charger before use.
1. Insert the battery into the battery charger.
2. Connect the power cord to the charger andinsert the plug into a wall outlet.
„The status LED on the charger lights red
when charging has started and lights
green when charging is completed. The
LED also lights green if no battery is
inserted into the charger.
„ Charging time varies according to the
ambient temperature and the status of battery.
„ Remove the...

EN-17
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
„The camera is turned on for the first time.
„ The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the   button to [ ] or [ ].
2. Press the   button.
3. Select [Setup] with the  f button.
4. Select [Date/Time] with the  c /  d...

EN-18
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1.Press the   button to [ ] or [ ]; or press the [ ] button.2. Press the   button.
3. Select [Setup] menu with the f button.
4. Select [Language] with the c / d buttons and press
the  button.
5. Select the displayed language with the c / dbuttons and press the  button.„ The setting will be stored.
Formatting the Memory Ca rd or Internal Memory
This utility formats the internal memory (or...

EN-19
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.8 full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the   button to turn the power on.„The status LED lights green and the camera is initiated.
„ If the power is turned on in [ ] or [ ] mode, the lens will extend forward and it
is ready for shooting. In both modes, if the camera mode is changed to [ ], the
lens barrel will retract into the camera body after 30...