Sanyo Vpc T850 Instruction Manual

							
EN-10
INTRODUCTION
Overview
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital images is fast and easy with this state-of-the-art smart
camera. Equipped with a 8.1-megapixel CCD, this camera is capable of capturing
images with a resolution of up to 3264 x 2448 pixels.
Package Contents
Carefully unpack your camera and ensure that you have the following items:
Common Product Components:
„Digital Camera
„ Software CD-ROM
„ USB cable
„ AV  c a b l e
„ Camera strap
„ Camera pouch
„ Rechargeable lithium-ion battery
„ Battery charger
„ AC adapter for battery charger
„ Instruction manual
Optional Accessory:
„ SD/SDHC memory card
„Accessories and components may vary by retailer.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-11
GETTING TO KNOW YOUR CAMERA
Front View
1. Shutter button
2. Flash
3. Power button
4. Status LED
5. Microphone
6. Lens
7. Self-timer LED
8. Zoom lever
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-12
Rear View
1. LCD monitor
2.  Mode button
3.  Menu button
4. Direction button
S     button
Focus button
X      button
Flash button
T      button
Self-timer buttonDelete button
W      button
Backlight / Exposure 
compensation button
5. Strap holder
6. USB or AV OUT terminal
7.  Set button   Display button
8.  Playback button
9. Battery / Memory card cover
10. Tripod socket
11. Speaker
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-13
LCD Monitor Display
Capture mode
1. Zoom status2. Voice memo3. Battery condition[ ]    Full battery power
[ ]    Medium battery power
[ ]    Low battery power
[ ]    No battery power
4. Flash  mode[Blank]Auto Flash
[ ]   Red-eye Reduction
[]   Pre-flash
[ ]   Forced Flash
[ ]   Flash Off
5. Storage media[ ]  Internal memory (no card)
[ ]  SD/SDHC memory card
6. [ ] Histogram7. Main focus area (When the shutter
button is pressed halfway)
8. Image quality
     [ ]  Fine
     [ ]  Standard
     [ ]  Economy
9. Image size resolution
[ ]  3264 x 2448
[ ]  2816 x 2112
[ ]  2272 x 1704
[ ]  1600 x 1200
[ ] 640 x 480
10. Available number of shots
11 . I S O
[Blank] Auto
[] ISO 64
[ ] ISO 100 
[ ] ISO 200
[ ] ISO 400 
[ ] ISO 800 
[ ] ISO 1600
12. Self-timer icon [  ] 2 sec.
[ ] 10 sec.
[  ] 10+2 sec.
13. Date and time
14. [ ]  Exposure compensation 
[] Backlight correction 
(Adjust exposure value with the  e / f buttons)15. Capture mode icon
     [Blank] Single
     [ ] Continuous
     [ ] Auto Exposure Bracketing       [ ] Burst
      [ ] Series+flash
      [ ] Pre-Shot
      [ ] Couple Shot
16. Slow shutter warning
17. White balance
[Blank]  Auto
[ ] Incandescent
[ ] Fluorescent 1
[ ] Fluorescent 2
[ ] Daylight
[ ] Cloudy
[ ] Manual 
18. Focus setting
[Blank] Auto focus
[ ] Face detection
[]   Macro 
[ ] Infinity
19. Scene  mode [ ] Program AE
[ ] Anti Shake
[ ] Panorama
[ ] Portrait Man
[ ] Portrait Lady
[ ] Landscape
[ ] Sports
[ ] Night Portrait
[ ] Night Scene
[ ] Candlelight
[ ] Fireworks
[] Text
[ ] Sunset
[]Sunrise
[ ] Splash Water
[ ] Flow Water
[]Snow
[]Beach
[]Pets
[ ] User Setting
P
m
2 008 / 0 3 / 0 1  0 0 :  0 02008 / 03 / 01  00 : 00
000010000100001+  0 .3+ 0.3 x4.0
x
4.0x4.0
ff
123
10111213
45678914
1516171819qq
P
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-14
Video mode []1. Zoom status
2. Flash mode
3. Battery condition
4. Storage media
5. Main focus area
6. Video quality
7. Video resolution
8.
Available recording time/Elapsed time9. Self-timer icon
10. Date and time
11. Focus setting
12. Mode icon
Playback mode  []  -  Still image playback1. Voice memo
2. Battery condition
3. Storage media
4. Histogram
5. ISO
6. Image quality
7. Image size resolution
8. File number
9. Folder number
10. Date and time
11. Exposure value
12. Aperture value
13. Shutter speed value
14. Protect icon
15. Mode icon
Playback mode [] -  Video playback1. Video status bar
2. Elapsed time
3. File number
4. Folder number
5. Sound off icon (When the  c button is 
pressed during video playback)
6. Play mode
7.Mode icon
8. Total recorded time
2 008 / 0 3 / 0 1  0 0 :  0 02008 / 03 / 01  00 : 0000 :  2 100 : 21
x4.0
x
4.0x4.0
123
8910
4
5
67
11
12
xx
EEff100- 00011 00- 0 001100- 000101 / 0 1 / 2 008 0 0:0 001 / 01 / 2008 00:00+  0 .3+ 0.3F 2.8F2.81 / 381
 / 3 81 / 38
AA
aaShutter:PlayS hutte r:P la yShutter:Play
10
111213
14
15
12
7
98
3
456
R100 - 0001100 -  0 001100 - 0001
T ota lTotal
00 : 00 : 0800 :  0 0 :  0 800 : 00 : 08P la yPlay
00 : 00 : 010 0 :  0 0 :  0 100 : 00 : 01
EE
1
67543
28
qq
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-15
GETTING START
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation asshown.
4. Insert an SD/SDHC memory card (Optional).  „
The camera has 32MB internal memory (28MB
available for image storage), but you can load an
SD/SDHC memory card to  expand the camera’s
memory capacity.
„ Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/memory card cover and make sure it
is locked securely.
„To prevent valuable data from being accidentally erased from
an SD/SDHC memory card, you can slide the write protect tab
(on the side of the SD/SDHC memory card) to “LOCK”.„To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card .
„To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/
SDHC memory card. If inserting or removing the SD/SDHC
memory card with the power on, the camera will automatically turn off.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-16
Charging the Battery
Charge the battery fully with the supplied battery charger before use.
1. Insert the battery into the battery charger.
2. Connect the power cord to the charger andinsert the plug into a wall outlet.
„The status LED on the charger lights red
when charging has started and lights
green when charging is completed. The
LED also lights green if no battery is
inserted into the charger.
„ Charging time varies according to the
ambient temperature and the status of battery.
„ Remove the battery after charging is completed.
„The battery may feel warm after it has been charged or immediately after being used. This is
normal and not a malfunction.
„When using the camera in cold areas, keep the camera and battery warm by holding them inside
your outer clothes.
2
1
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-17
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
„The camera is turned on for the first time.
„ The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the   button to [ ] or [ ].
2. Press the   button.
3. Select [Setup] with the  f button.
4. Select [Date/Time] with the  c /  d buttons, and
press the   button.
5. Select the date format with the  c /  d buttons,
and press the   button.
„ Select the item’s field with the  e / f  buttons
and adjust the value for the date and time
with the  c / d  buttons.
„
The time is displayed in 24-hour format.„After confirming all settings are correct, press
the  button.6. To exit from the [Setup] menu, press the 
button.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-18
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1.Press the   button to [ ] or [ ]; or press the [ ] button.2. Press the   button.
3. Select [Setup] menu with the f button.
4. Select [Language] with the c / d buttons and press
the  button.
5. Select the displayed language with the c / dbuttons and press the  button.„ The setting will be stored.
Formatting the Memory Ca rd or Internal Memory
This utility formats the internal memory (or memory card) and erases all stored images
and data.
1. Press the [ ] button.
2. Press the   button.
3. Select [Setup] menu with f button.
4. Select [Format] with the c / d buttons, then
press the  button.
5. Select [Execute] with the c / d buttons, and
press the  button.„To cancel formatting, select [Cancel] and
press the  button.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							
EN-19
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.8 full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the   button to turn the power on.„The status LED lights green and the camera is initiated.
„ If the power is turned on in [ ] or [ ] mode, the lens will extend forward and it
is ready for shooting. In both modes, if the camera mode is changed to [ ], the
lens barrel will retract into the camera body after 30 seconds.
2. Press the   button to [ ].
3. Compose your image in the LCD monitor. „Slide the zoom lever to   side to zoom in on the subject, and enlarges the
subject on the LCD monitor.
„ Slide the zoom lever to   side to zoom out on the subject, and provides a wider
angle image.
4. Press the shutter button.
„
Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the images.
„The focus area frame turns green when
the camera is in focus and the exposure is
calculated.
„ When the focus or exposure is not
suitable, the frame of the focus area turns
red.
a
b
Downloaded From camera-usermanual.com Sanyo Manuals