Sanyo VPC S60EX User Manual

							55English
ACCESSING THE RECORDING MENU
Overview of the Recording Menu
RECORDING MENU
TOUCH SENSOR
RESOLUTION
FOCUS METHOD
ISO
WHITE BALANCE
EXPOSURE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English56
1Touch sensor menu (page 57)
2Resolution menu/video clip 
mode menu (page 58)3Focus mode menu (page 61)
4ISO sensitivity menu 
(page 62)
5White balance menu (page 63)
6Exposure correction icon 
(page 65)
hChange the brightness of the 
image.
iWhen you specify multiple functions that cannot be simultaneously 
enabled, the function which was last set becomes the active setting, and 
the other settings accordingly change automatically.#: Set the shutter button 
touch sensor to ON.
$: Set the shutter button 
touch sensor to OFF.

k: Shoot at 3,680 × 2,760 
pixels (single-shot 
shooting mode only
D: Shoot at 2,816 × 2,112 
pixels
z: Shoot at 2,288 × 1,712 
pixels 
t: Shoot at 1,600 × 1,200 
pixels 
[: Shoot at 640 × 480 pixels 

5: Shoot at 320 × 240 pixels
d: Shoot at 640 × 480 pixels
: The camera will determine 
the setting automatically.
r: For photography in fair 
weather (sunny) conditions
o: In overcast conditions
p: Under fluorescent lighting
q: Under incandescent 
lighting
]: For setting the most 
accurate white balance
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							57English
TOUCH SENSOR (TOUCH FOCUS) 
SETTING
The touch sensor function, by which the autofocus is activated by a finger-
touch on the shutter button, can be set to ON or OFF. When the touch sensor 
function is set to OFF, the autofocus is activated when you press the shutter 
button halfway; then gently press the shutter button to snap the picture.
1 Display the Recording Menu (page 54).
2 Select “TOUCH SENSOR” and 
press the SET button.
hThe sensor menu appears.
3 Select the desired icon, and press the SET button.
hThe selected touch sensor function is set.
CAUTION
iWhen the camera is attached to a tripod, the touch sensor sensibility may 
be diminished. This happens because the touch sensor works by detecting 
changes in the capacitance when the camera is touched with bare hands. 
The touch sensor sensibility will also be diminished, for example, if you 
hold the camera with gloved hands.
iWhen the camera is used near inverter-type fluorescent lights, the touch 
sensor sensitivity may be diminished.#: The touch sensor function is set to 
ON.
$: The touch sensor function is set to 
OFF.
RECORDING MENU
TOUCH SENSOR
RESOLUTION
FOCUS METHOD
ISO
WHITE BALANCE
EXPOSURE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English58
RESOLUTION/VIDEO CLIP SETTING
By setting the image resolution (pixels) to a higher setting, image detail is 
enhanced for a smoother, finer picture. However, the file size also becomes large 
and uses more memory. Select the resolution setting that suits your purpose.
1 Display the Recording Menu (page 54).
2 In the single shot or sequential 
shots shooting mode select 
[RESOLUTION], or in the video clip 
recording mode select [VIDEO CLIP 
MODE], and press the SET button.
hThe resolution menu or video clip 
mode menu appears.


3 Select the desired icon, and press the SET button.
hThe selected resolution setting or video clip mode setting is set. k: Shoot image at 3,680 × 2,760 
pixels (Single shot mode only) 
D: Shoot image at 2,816 × 2,112 
pixels
z: Shoot image at 2,288 × 1,712 pixels 
t: Shoot image at 1,600 × 1,200 pixels 
[: Shoot image at 640 × 480 pixels 
5: Shoot at 320 × 240 pixels.
d: Shoot at 640 × 480 pixels.

						

							59English
RESOLUTION/VIDEO CLIP SETTING
Record and play back an audio file
In the video clip recording mode, your camera can make audio recordings.
kRecord an audio file
1 Display PAGE 1 of the Recording 
Menu for the video clip recording 
mode (page 54).
2 Select the audio recording icon 
< from the video clip mode 
menu, and press the SET button.
3 Press the MENU button.
hThe recording mode is enabled.
4 Press the shutter button.
hAudio recording begins. It is not 
necessary to continue pressing 
the shutter button while recording.
hTake care not to cover the 
microphone with your fingers.
5 End the recording.
hPress the shutter button again to 
stop recording.
17:03:19
Remaining time
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English60
kPlaying back audio recordings
Listen to your audio recordings.
1 Display the desired audio data.
hA musical note graphic appears on 
the screen.
2 Play back the recording.
To do this...Do this
Forward playback Press the SET button.
Stop playback During playback, press the [o] button
PauseDuring playback, press the SET button.
During fast forward or fast reverse, press the 
[n] button.
Fast forwardDuring forward playback, press the [m] button.
* The speed changes each time the [m] button 
is pressed, as follows:
Normal playback 
→ 2x → 5x → 10x → 15x
Press the [l] button to resume normal speed.
Fas t revers eDuring forward playback, press the [l] button.
* The speed changes each time the [l] button 
is pressed, as follows:
15x ← 10x ← 5x
Press the [m] button to resume normal speed.
Return to normal playback speedPress the SET button.
Adjusting the volumeLouder: During playback, press [T] on the 
zoom switch.
Softer: During playback, press [W] on the 
zoom switch.
100-0013
2006.12.24
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							61English
FOCUS AREA SETTING
You can choose from the following 2 types of autofocus (still image shooting 
only):
9-point range finder focus: The correct focus is determined from 9 different 
focus points within the shooting area visible on the 
monitor. When the image is focused, a target 
mark & appears.
Spot focus: The camera focuses on the subject in the center 
of the monitor.
1 Display the Recording Menu 
(page 54). 
2 Select “FOCUS METHOD” and 
press the SET button.
hThe focus mode menu appears.
B: 9-point range finder focus is 
selected. 
C: Spot focus is selected. 
hWhen the spot focus setting is 
selected, the focus mark + appears 
in the center of the monitor. 
3 Select the desired icon, and press 
the SET button.
hThe focus area is set.
12
RECORDING MENU
TOUCH SENSOR
RESOLUTION
FOCUS METHOD
ISO
WHITE BALANCE
EXPOSURE
Focus mark
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English62
ISO SENSITIVITY
With the initial settings, the ISO sensitivity is automatically set according to 
the brightness of the subject. However, the ISO sensitivity can be set to a 
fixed setting.
1 Display the Recording Menu (page 54).
2 Select “ISO” and press the SET 
button.
hThe ISO sensitivity menu appears.
3 Select the desired icon, and press the SET button.
hThe ISO sensitivity is set.
HINT
iBy setting a higher ISO sensitivity, you can set higher shutter speeds and 
capture images in darker locations, but noise in the captured images may 
increase.t: Sets the ISO sensitivity 
automatically (equivalent to 
ISO50 to 200 [video clip recording 
mode: ISO200 to 800]).
*: Sets the sensitivity to ISO50 
equivalent (video clip recording 
mode: ISO200).
u: Sets the sensitivity to ISO100 equivalent (video clip recording 
mode: ISO400).
v: Sets the sensitivity to ISO200 equivalent (video clip recording 
mode: ISO800).
w: Sets the sensitivity to ISO400 equivalent (video clip recording 
mode: ISO1,600).
RECORDING MENU
TOUCH SENSOR
RESOLUTION
FOCUS METHOD
ISO
WHITE BALANCE
EXPOSURE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							63English
WHITE BALANCE
This camera automatically adjusts the white balance under most lighting 
conditions. However, if you want to specify the lighting conditions or change 
the overall tone of the image, the white balance can be manually set.
1 Display the Recording Menu (page 54).
2 Select “WHITE BALANCE” and 
press the SET button.
hThe white balance menu appears.
>: The camera will make the white 
balance adjustment automatically 
based on the natural and artificial 
light conditions. This is the setting 
used in the auto mode.
r: For shooting outside on a sunny 
day.
o: For shooting outside on a cloudy day.
p: For shooting inside under fluorescent lighting.
q: For shooting inside under incandescent lighting.
]: For more accurate adjustment or when the light source cannot be 
specified (one-push).
Setting procedure 
1Select the ] icon, fill the entire screen with a plain white 
card (or piece of paper, etc.), and press the SET button.RECORDING MENU
TOUCH SENSOR
RESOLUTION
FOCUS METHOD
ISO
WHITE BALANCE
EXPOSURE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English64
3 Select the desired icon, and press the SET button.
hThis completes the white balance setting.
hOnce the white balance setting is programmed for the ] icon, it is 
retained even if another white balance setting (>, r, o, p, or 
q) is selected. If you changed to another setting, whenever you 
select the ] icon and press the SET button, the previously 
programmed setting is recalled. 
HINT
To cancel the white balance setting
iPerform step 1, select >, and then press the SET button.
Downloaded From camera-usermanual.com Sanyo Manuals