Sanyo Vpc S60ex Instruction Manual

115English
COMMONLY ASKED QUESTIONS
Viewing 
imagesWhy isn’t the 
magnified image 
clear?Due to the 
characteristics of 
the camera, 
magnified images 
appear less clear.Not a malfunction.
Why isn’t the 
captured image 
clear?The image was 
captured using 
the digital zoom.Not a malfunction.
Zoom in only within 
the optical zoom 
range when 
shooting.
Can I play back 
image data that I 
edited using my 
computer?— We cannot 
guarantee the 
accurate playback of 
data that has been 
edited using a...

English116
Misc.Why can’t the 
camera be 
operated?A temporary 
internal circuitry 
problem may be 
the cause.Remove the AC 
adaptor and 
batteries from the 
camera, wait a few 
minutes, then 
reinstall the 
batteries and try 
again.
Can I use my 
camera abroad?—If you have 
questions about 
using the AC 
adaptor and power 
cord abroad, please 
consult with a dealer 
near you for advice.
Why does the 
“SYSTEM 
ERROR” 
message appear?A problem has 
occurred within 
the camera or 
card.Check the following...

117English
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a 
possible solution to the problem.
CAMERA
Problem Cause ActionReference 
page
PowerNo power. The batteries 
are dead.Insert new 
batteries.
14 The batteries 
have not been 
inserted 
correctly.Reinsert the 
batteries, 
making sure to 
orient them 
correctly.
The battery/
card cover is 
not completely 
closed.Close the 
battery/card 
cover 
completely.
The camera 
turns off by 
itself.The power 
save...

English118
ShootingAn image is 
not captured 
when the shut-
ter button is 
pressed.The maximum 
number of 
images that 
can be cap-
tured or the 
maximum 
video clip 
recording time 
has been 
reached.Install a new 
card.14
Erase the 
images that are 
not necessary.
Save the 
images to sep-
arate media, 
then erase all 
the images 
from the card.37, 95
The operation 
buttons (arrow 
buttons, 
MENU button, 
etc.) do not 
work.A finger is 
touching the 
shutter button, 
and the focus 
lock is...

119English
TROUBLESHOOTING
ShootingWhen zooming 
in or out, the 
zoom 
movement 
stops 
momentarily.The optical 
zoom has 
moved to the 
maximum 
magnification 
position.Not a 
malfunction. 
Release the 
zoom switch, 
and press it 
again.47
There is noise 
in the captured 
image.The ISO 
sensitivity 
setting is too 
high.Set the ISO 
sensitivity to a 
lower setting.62
MonitorNo playback 
image 
appears.The playback 
mode is not 
active.Press the 
playback button 
[=].26
Viewing 
imagesThe image is 
too...

English120
Viewing 
imagesThe image is 
too bright.The forced 
flash mode is 
selected.Select a 
different flash 
mode.48
The subject 
was too bright.Use the 
exposure 
correction 
function.65
The ISO 
sensitivity 
setting is 
incorrect.Set the ISO 
sensitivity to 
t.62
The image is 
not in focus.The subject is 
too close to the 
camera.Select the 
correct focus 
setting for your 
needs.31, 52
The focus 
setting is not 
correct.
The camera 
moved when 
the shutter 
button was 
pressed.Hold the 
camera...

121English
TROUBLESHOOTING
Viewing 
imagesA part of the 
image is 
missing.The handstrap 
or a finger was 
blocking the 
lens or lens 
opening.
Hold the camera 
correctly, and 
make sure the 
lens is not 
obstructed.
22
“NO IMAGE” is 
shown.
There is no 
image stored in 
the installed 
card or the 
internal memory.Play back after 
capturing 
images. 31, 33
Image 
editingYou cannot 
edit or rotate 
an image.The protect 
mode is set.Cancel the 
protect mode. 68
Misc.
The 
“PROTECTED” 
message 
appears and...

English122
Notes regarding the scene function
During still image shooting
About the scene function and focus range 
settings
iThe scene function changes to . when the focus range is set to +.
iEven if you set the focus range to -, it changes to * when the scene 
function is set to a ^.
YThe macro + focus range setting is not available.Z
_
The resolution is fixed at [.
The flash is disabled even when shooting single 
shots.
\The macro + focus range setting is not available.]
^
The macro + and manual focus...

123English
SPECIFICATIONS
Camera
Type CCD digital camera (recording and playback)
Recording system Digital recording
Image file formatStill images:JPEG format (DCF, DPOF, Exif 
2.2 compliant) 
Note: Designed mainly by the Japan 
Electronics and Information Technology 
Industries Association (JEITA), DCF 
(Design rule for camera file system) is 
standard for digital still camera image 
files to provide interoperability between 
digital photography devices for the 
images stored on removable memory 
cards....

English124
Recording resolutionk: 3,680 × 2,760 pixels (single-shot still 
images only)
D: 2,816 × 2,112 pixels (single-shot still 
images and sequential shots only)
z: 2,288 × 1,712 pixels (single-shot still 
images and sequential shots only)
t: 1,600 × 1,200 pixels (single-shot still 
images and sequential shots only)
[: 640 × 480 pixels (single-shot still images 
and sequential shots only)
d: 640 × 480 pixels, 30 frames/second 
(video clip recording only)
5: 320 × 240 pixels, 15 frames/second 
(video...