Sanyo Vpc S4 Instruction Manual

							English58
3 Play back a video clip.
Normal playback
hPress the SET button.
hPressing [l] during a video clip playback will start reverse playback.
To pause playback
hPress the [n] button to pause playback; press the SET button to 
continue playback.
To play back one image at a time (single-frame step)
hWhile video clip playback is paused, you can press the [m] arrow 
button to view the frames in order, or [l] to view them in reverse order.
To accelerate playback
h2x fast forward playback: During normal speed playback, press [m].
h20x fast forward playback: During 2x playback, press [m].
*Pressing [l] will start reverse playback.
hFor normal playback: during playback, press the SET button.
NOTE
iSound cannot be played back.
iTo play back images from the cameras internal memory, remove the card 
from the camera.
HINT
iIf you press the shutter release button while an image is displayed, the 
image number will be shown. Press the shutter release button again to turn 
off the image number indication.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							59English
VIEWING IMAGES
HINT
To view video clips on your computer
iYou can view video clips taken with this camera on your computer using 
QuickTime Ver. 3.0 or later from Apple.
iBy using the QuickTime Plug-in included with QuickTime, you can also 
play back your video clips on your Internet browser.
iQuickTime 6.5 for Windows and Macintosh is supplied with the included 
CD-ROM (SANYO Software Pack).
iOnline information about QuickTime can be found at
http://www.apple.com/quicktime/.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English60
Convenient 9-image display playback
1 Set the main switch to [ ], 
and turn on the camera.
2 Press [W] ([ ]) on the zoom 
switch.
hThe 9-image display appears.
3 Select the image to play back.
hPress the [n], [o], [l] or [m] 
arrow button to move the 
orange frame to the desired 
image, and press the SET 
button.
Instead of pressing the SET 
button, you can press [T] ([ ]) 
on the zoom switch to show the 
image full screen.
PC
[W]
 100
           0001               0002               0003
           0004               0005               0006
           0007               0008               0009
Main switch
Zoom switch
Video clip
Still imageOrange 
frame
Image number
Folder numberArrow button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							61English
VIEWING IMAGES
Magnifying (zooming in) the image
1 Display the image that you want to magnify (see pages 57 and 58).
hFor a video clip, pause playback at the place you want to magnify.
2 Press [T] ([]) on the zoom switch.
hMagnification is enabled.
hThe image is magnified, and the 
central portion of the image is 
displayed.
hUse the arrow buttons to view 
different parts of the magnified 
image.
To magnify:
Press [T] ([ ]) on the zoom 
switch.
To return to normal size:
Press [W] ([ ]) on the zoom switch.
hThe maximum degree of magnification will depend on the resolution of 
the original image.
hThe maximum magnification is about 51x at   resolution.
hIf the image has been rotated, it will be returned to its original 
orientation and then enlarged.
hOne scene (still image) of a paused video clip can be enlarged; 
however, a video clip cannot be played while enlarged.
HINT
The magnified portion of the image can be saved as a separate image.
iPress the shutter release button. The magnified portion is saved as a new 
still image.
ZOOM
MOVE
ZOOM I/O
SHUTTER FOR SAVE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English62
DISPLAYING THE PLAYBACK SETTING SCREEN
To process your photographed images, select the desired menu from the 
Playback Setting Screen.
Displaying the Playback Setting Screen
1 Set the main switch to [ ], and 
turn on the camera (see page 23).
hThe image that was last captured 
appears on the LCD monitor.
2 Press the MENU button.
hThe Playback Setting Screen 
appears.
kTo cancel the Playback Setting 
Screen
hPress the MENU button.
PROTECT
Change image  
protect setting
242KB 100 - 0001
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							63English
DISPLAYING THE PLAYBACK SETTING SCREEN
Playback Setting Screen
* All the icons never appear at the same time.
1Setting/option switch (see 
page 82)
hSwitch between the Playback 
Screen and the Option 
Screen.
2Data protect setting (prevent 
accidental erase)
3Data erase
4Resize
5Rotate image
6Print settings
7Copy image data
hDisplayed only when there is a 
card installed.8Extract still image
9Slideshow settings and 
playback
0HELP display
AImage number
BData size
CProtect mark
DResolution
ECompression rate
FInternal memory icon
GRemaining battery charge
iIcons 7 through 9 on the Playback Setting Screen are displayed when 
you press the [n] or [o] arrow button to scroll down the screen.
PROTECT
Change image  
protect setting
1004KB 100 - 0001
COPY IMAGE
EXTRACT STILL
SLIDESHOW
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English64
CHANGING IMAGE SIZE (RESIZE)
For a still image that was captured using a higher resolution than  , you 
can change the size to 640 × 480 pixels or 320 × 240 pixels and save it as a 
separate still image.
1 Display the still image whose size you want to change.
2 Display the Playback Setting Screen (see page 62). 
3 Select the resize icon  , and 
press the SET button.
hThe Resize Screen appears.RESIZE
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							65English
CHANGING IMAGE SIZE (RESIZE)
4 Press [n] or [o] on the arrow button to select the new image size.
5 Press the SET button. 
hThe Confirm Size Change Screen 
appears.
6 Select “YES”, and press the SET 
button.
hResizing begins.
hWhen resizing is completed, you 
are returned to the Playback 
Setting Screen.: The saved image will be 640 × 480 pixels.
: The saved image will be 320 × 240 pixels.
: Return to the Playback Setting Screen.
RESIZE?
YES
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English66
ROTATING AN IMAGE
Captured images can be rotated to the correct orientation for viewing.
1 Display the still image you want to rotate.
2 Display the Playback Setting Screen (see page 62).
3 Select the rotate image icon  , and 
press the SET button.
hThe Rotate Image Screen appears. 
4 Select the rotate right icon   or rotate left icon  , and press the 
SET button.
hEach time the SET button is pressed, the image is rotated another 90 
degrees.: Rotates image clockwise 90 
degrees
: Rotates image counterclockwise 
90 degrees
ROTATE
RIGHT
LEFT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							67English
SLIDESHOW PLAYBACK 
1 Display the still image or video clip to play back, and display the 
Playback Setting Screen (see page 62).
2 Select the slideshow icon  , and 
press the SET button.
hThe Slideshow Screen appears.

1Select “TIME” or “EFFECT”, press the SET button.
2Press [n] or [o] on the arrow button to select the desired setting. 
3Press the SET button.
3 Select “START”, and press the SET 
button.
hSlideshow playback is canceled 
when the SET button, MENU button 
or an arrow button is pressed.STILL 
IMAGE:Only still images are played 
back in the slideshow.
VIDEO 
CLIP:Only video clips are played 
back in the slideshow.
MIX:Still images and video clips 
are played back in the 
slideshow.
EXIT:Return to the Playback 
Setting Screen.
SLIDESHOW
STILL IMAGE
VIDEO CLIP
EXITMIX
SLIDESHOW
TIME
EFFECT
START
EXITOFF
Downloaded From camera-usermanual.com Sanyo Manuals