Sanyo Projector Plc Wxu700 User Manual
Have a look at the manual Sanyo Projector Plc Wxu700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
81 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 51 on the owner’s manual of “Network Set-up and Operation.” Projector Input RGB Computer 2 (Analog) Component RGB (Scart) PJLink Input RGB 2 RGB 1 DIGITAL 1 RGB 3 RGB 4 Video S-video VIDEO 2 VIDEO 3 NETWORK 1NETWORK Computer 1 Video PJLink is a registered trademark of JBMIA and pending trademark in some countries. Pj Link Notice Parameter 12 11 31 13 14 22 23 51 Appendix HDMI(Digital)
8 Vcc - Data + Data Ground 1 3 4 2 3 4 1 COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 4 3 6 7 8 +5V Power/----- Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) DDC Data/----- Ground/----- Vert. sync. DDC Clock/----- 9 13 10 1 11 14 15 RX – TX + TX – RX + 3 4 8 7 6 5 4 3 2 1 5 6 7 8 1 USB CONNECTOR (Series B) LAN TERMINAL ----- ----- ---------- Appendix 13579111315171918161412108642 TMDS Data 2+ Input Ground (TMDS Data 1) Ground (TMDS Data 2) TMDS Data 1+ Input TMDS Data 2- Input TMDS Data1- Input TMDS Data 0+ Input Ground (TMDS Data 0) 1 5 2 4 3 6 7 8 Ground (TMDS Clock) SCL TMDS Clock- Input ----- ----- SDA Ground (DDC/CEC) 11 15 12 14 13 16 17 TMDS Data 0- Input TMDS Clock+ Input 9 10 Plug insert detection19 18+5VPower HDMI (19 Pin Type A)
83 Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code. PIN Code Lock No . Logo PIN Code Lock No . *Should the four-digit number be changed, the factory set number will be invalid. → Hook and loop fastener (supplied) USB Thumb Drive Case While the USB thumb drive is not in use, put it in the USB Thumb Drive Case to prevent lose USB theumb drive. Use hook and loop fastener, the USB Thumb Drive Case will be a fixed place on the projector. USB thumb drive case (supplied)
84 Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 10.14 (257.5) 13.16(334.2) 2.14(53.8) 3.17(80.5) 3.09(78.4) 5.08(129.0)5.20(132.0) 2.78(70.5) 5.08(129.0)4.43(112.5) 5.51(140.0) 3.66(93.0)