Sanyo Plc Xp100l Projector User Manual
Have a look at the manual Sanyo Plc Xp100l Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 79
79
The command is sent from PC to the projector with
the format below;
'C' [Command] 'CR'
Command: two charactors (refer to the
command table below.
-The projector decodes the command and returns the
'ACK' with the format below;
'ACK' 'CR'
-When the projector can not decode the command, it
returns with format below.
‘?’ ‘CR’
Format
Appendix
Functional Execution Command
CommandFunction
C00Turn the projector ON
C01Turn the projector...](http://img.usermanuals.tech/thumb/67/95730/w64_sanyo-plc-xp100l-manual_d-78.png "Page 79
79
The command is sent from PC to the projector with
the format below;
'C' [Command] 'CR'
Command: two charactors (refer to the
command table below.
-The projector decodes the command and returns the
'ACK' with the format below;
'ACK' 'CR'
-When the projector can not decode the command, it
returns with format below.
‘?’ ‘CR’
Format
Appendix
Functional Execution Command
CommandFunction
C00Turn the projector ON
C01Turn the projector...")
![Page 80
80
Status Read Command
Appendix
The command is sent from PC to the projector with
the format below;
'CR' [Command] 'CR'
Command: one character (refer to the command
table below.
The projector decodes the command and returns the
'Charactor string' with the format below;
Format
CommandFunctionProjector
ReturnProjectro status
CR0Status Read
00Power On
80Stand-by mode
40Countdown
20Cooling down
10Power Malfunction
28Cooling down at the temperature anomaly
24Cooling...](http://img.usermanuals.tech/thumb/67/95730/w64_sanyo-plc-xp100l-manual_d-79.png "Page 80
80
Status Read Command
Appendix
The command is sent from PC to the projector with
the format below;
'CR' [Command] 'CR'
Command: one character (refer to the command
table below.
The projector decodes the command and returns the
'Charactor string' with the format below;
Format
CommandFunctionProjector
ReturnProjectro status
CR0Status Read
00Power On
80Stand-by mode
40Countdown
20Cooling down
10Power Malfunction
28Cooling down at the temperature anomaly
24Cooling...")
