Sanyo Lcd 32ca9s Owners Manual

31
PICTURE
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select PICTURE, and will display 
PICTURE menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
Select PERSONAL, STANDARD, DYNAMIC or SOFT by 
pressing POINT 
{
y  buttons.

”PERSONAL: User presets picture adjustment in PICTURE 
MODE.

”STANDARD: Natural and splendid picture level preset on LCD TV.

”DYNAMIC: Bright and dynamic picture. It is suitable for nice...

32
SOUND
Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select SOUND, and will display 
SOUND menu.
Press POINT
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
SCREEN MENU
Note:  For the details, please refer to SOUND  on page 27.
MENU OPERATION (PC/HDMI mode)
TIMER
SELECTADJUSTBACKEXIT
- - : - -ON TIMER
SELADJ BACK
EXIT
ON TIMER CH                                  29OFF
BACKMENU
OFF TIMER
SCREEN MENU Press MENU button and the main menu...

33
MENU OPERATION (PC/HDMI mode)
SCREEN MENU Press MENU button and the main menu will appear. Press 
POINT 
{
y buttons to select SYSTEM, and will display 
SYSTEM menu.
Press POINT 
x
z buttons to select the item desired.
Press POINT 
{
y buttons to adjust value.
ECO
This function can automatically adjust panels brightness by ambient 
brightness.
Press POINT 
{
y buttons to set ON or OFF.
CHILD LOCK
SYSTEM
This function is used to adjust the position of image displayed on 
screen. It can be selected when...

34
MENU OPERATION
The Dealer Mode has 7 different modes: VOLUME LOCK, TUNING LOCK, STA R T  MODE, OSD, RC,
RESET and AC POWER MODE.
SIDE  CONTROLS
REMOTE  CONTROLSVOLUME LOCK
This function is used to limit the maximal volume.
STA R T  MODE
The LCD TV will automatically enter to the setting mode while being
turned on. You can select OFF, TV, AV1-S, AV2-DVD, PC,
HDMI 1 or HDMI2 in STA R T  MODE. When it is set OFF, it willkeep the mode before being turning off.
OSD
When it is set OFF, Corresponding OSD...

35
Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV. 
Clean your LCD TV as follows:

”Gently wipe the screen and cabinet with dry soft cloth.

”The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard 
cloth or paper. Do not use solvents or abrasions.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These chemicals may 
damage the cabinet finish.
AUTO POWER OFF
When a trouble is detected...

36
APPENDIX
TROUBLESHOOTING
Before calling your dealer or service center for assistance, check the matters below once again.
1. Make sure you have connected LCD TV to your equipment as described in the section CONNECTING 
LCD TV.
2. Check cable connection. Verify that all external equipment  and power cords are properly connected.
3. Verify that all power is switched on.
4. If LCD TV still does not produce an image, re-start  the  external equipment.
5. If the image still does not appear, unplug LCD TV...

37
Model LCD-32CA9S / LCD-37CA9S / LCD-42CA9S
Maximum Visible Range LCD-32CA9S: 81cm (Screen Diagonal Size);
   LCD-37CA9S: 94cm (Screen Diagonal Size); 
    LCD-42CA9S: 106cm (Screen Diagonal Size); 
Picture Resolution 1366(H) x 768(V)
Viewable Angle(L
{/3) L/R:+/- 89D, U/D:+/- 89D 
Brightness 500cd/m²
Contrast 1500:1
HILQLWLRQ 5)$QDORJ6LJQDOV+RUL]RQWDO

38
512341096781514131112
 CONFIGURATIONS OF VGA TERMINALS
VGA IN (D-SUB) 
TERMINAL
Terminal : D-SUB15  PIN 
Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting 
Macintosh computer, the MAC Adapter (not supplied) is required.
Pin Configuration
SIGNAL MODE COLUMN (recommended)
APPENDIX
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2Blue Input
Ground (Red)Ground (Green)Ground (Blue)
1
5
2
43
678
No Connect
Horiz. sync.
Ground (Vert.sync.)
Sense 1Sense...

39
APPENDIX
When input signal is digital from DVD terminal, refer to the chart below\
.
When input signal is digital from HDMI terminal, refer to the chart belo\
w.
Parts NameToxic Element
Plastic
Display Screen
Circuit Board
Hardware
Remote Control
Other Parts
( eg. :paster,line etc)
O:The symbol means  the content of toxic materials in all of homogeneous m\
aterials must meet requirement
     of SJ/T11363-2006 standard.
X:The symbol means  the content of toxic materials in all of homogeneous m\...

40

”Through in uninstalling work, handling with more than two people is recommended.

”When holding (moving or lifting) the LCD Display, hold the displays body. Do not handle the LCD TV by 
holding the attached accessory parts (speakers), otherwise it may result in damage.

”Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of the 
LCD TV and this stand. The desk must be larger than the LCD Display screen size. The desks surface 
must be flat and...