Sanyo Lcd 27xa2 Instruction Manual

							General Operation
11 11
Title-in 16:9
Full
Normal
TITLES ON SCREENTITLES ON SCREENTITLES ON SCREENTITLES ON SCREEN
4:3 14:9 16:9
Letterbox Video
As Zoom (16:9), but
bottom is compressed
even more to allow
subtitles to be seen.As Zoom (16:9), but
bottom is compressed
even more to allow
subtitles to be seen.As Zoom (16:9), but
bottom is compressed
even more to allow
subtitles to be seen.As Zoom (16:9), but
bottom is compressed
even more to allow
subtitles to be seen.
4:3 14:9 16:9
Letterbox Video
The whole screen is
filled stretching the
width.The whole screen is
filled stretching the
height slightly at the
edges.The whole screen is
filled with the correct
picture ratio.The black bars top
and bottom are bot-
tom are present and
the height is 
compressed.
 
4:3 14:9 16:9
Letterbox Video
The correct ratio is
maintained with black
bars on the left and
right.Black bars left and
right, picture height isstretched.Black bars left and
right, picture height isstretched.Black bars left, right,
top and bottom.
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 11
 
						

							Delete All ?
: Delete: Cancel
1
12
9
12 12
General Operation
Use Digital Shotfunction to capture and
save the up to 12 pictures and replay them in
a list mode, full screen mode and automatic
album mode.
Digital Shot Digital Shot
How to capture the pictures
1 1Press the Digital Shotbutton to capture 
a scene that you want to store.
(The screen is not frozen at this time.)
1  /  121  /  12
12  /  12
Memory Full
No Image
Up to 12 frozen pictures can be stored.
1  /  12
12  /  1212  /  12
Memory Full
No Image
“Memory Full” will be displayed for a few
seconds when 12 pictures are stored.
1  /  12
12  /  12
Memory FullMemory Full
No Image
2 2Select a picture that you want to display 
with the cursor / or /
button.
3 3Press the OKbutton to display.
Delete All ?
: Delete: Cancel
1
12
9
4 4To return to the normal TV mode, press 
the CSbutton. To return to the List mode:
Press the Bluebutton.
CS
: Delete All
: Auto Album
: Exit: Delete
: Select
CSOK
Delete All ?
: Delete: Cancel
1
12
9
To replay only the selected picture
1 1Press the CSbutton to display the screen
of List mode.
Delete All ?
: Delete: Cancel
1
: Delete All
: Auto Album
: Exit: Delete
: Select
CSOK1212
9
: Delete All
: Auto Album
: Exit: Delete
: Return
CS
Delete All ?
: Delete: Cancel
1
12
9
: Delete All
: Auto Album
: Exit: Delete
: Return
CS
Delete All ?
: Delete: Cancel
1
12
9
To display guide menu:
Press the OKbutton.To erase guide menu,
press the 
OKbutton again.
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 12
 
						

							General Operation
13 13
CS
: Delete All
: Auto Album
: Exit: Delete
: Select
CSOK
Delete All ?
: Delete: Cancel
1
12
9
Auto Album
Use this function to display each picture
continuously.
1 1Press the CSbutton to display the screen
of List mode.
2 2Press the Greenbutton, and each 
picture is displayed continuously every 
three seconds.
To stop Auto Album on the way:
Press the Greenbutton.
(To start 
Auto Album again, press the 
Greenbutton again .)
or
Press the OKbutton.
(To display guide menu, press the OKbutton 
again
.)
To return to the List mode:
Press the Bluebutton.
To return to the normal TV mode:
Press the CSbutton.
(When the TV/AV Selectoris pressed, TV 
return to the AV mode.)
CS
: Delete All
: Auto Album
: Exit: Delete
: Select
CSOK
Delete All ?
: Delete: Cancel
1
12
9
Deletion of pictures
1 1Press the CSbutton to display the screen
of List mode.
2 2Select a picture that you want to delete 
with the cursor / or /
button. Then press the Yellowbutton.
2) Press the Redbutton again.
(To cancel deletion, press the Blue
button.)
Delete All ?Delete All ?
: Delete: Delete: Cancel: Cancel
1
12
9
To delete all pictures at a time:
1) Press the Redbutton in the List 
mode.
Delete All ?
: Delete: Cancel
: Delete All
: Auto Album
: Exit: Delete
: Select
CSOK
1
12
9
1  /  12
12  /  12
Memory Full
No ImageNo Image
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 13
 
						

							14 14
Note:
Your picture adjustment will be memorized
to “Personal” of the Picture Mode automati-
cally.
4 4Once the adjustments have been 
completed, select “Memory” and press 
OKbutton to store the settings.
Press the MENUbutton to exit.
Picture Adjustments
3 3
Press or to adjust.
Menu Operation
Sound  Adjustments
The on-screen menu provides the viewer
with easy access to adjustments and 
settings. Follow the on-screen instruction at
the bottom of the screen.
■During the menu operation, the following 
buttons are used.
MENU
To call up the menu.
To exit the menu.
To move around the menus.
To make adjustments.
PicturePicture
Contrast
Colour
Sharpness
Tint
Text Brightness Brightness
Memory
Preset
Setting
Sound
P PTimer
To move around
the menus.
PicturePicture
Contrast
Colour
Sharpness
Tint
Text Brightness35
3644
52
Centre
OK?
Memory
32
Brightness
2 2Press to select a content.
•   
Tint :
Adjust colour tints. (Displayed only on 
NTSC signal reception.)
•   
Text Brightness :
Brightness of teletext screen (Minimum, 
Centre, Maximum). You can not control 
the picture and the teletext brightness in 
the teletext mode. You must first switch 
back to the TV mode and then adjust the 
picture control or set the teletext bright-
ness level.
1 1Press the MENU button, and select 
“Sound” menu with  or .
2 2Press to select a content.
Picture
:  Select:  Contents
MENU  :  Exit
OK button
To store the settings.
1 1Press the MENU button, and select 
“Picture” menu with or .
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 14
 
						

							15 15
Menu Operation
• 
 
Balance :
Left and Right speaker volume balance 
adjustment.
• 
 
BBE (ON/OFF)
Enable to switch the BBE sound turn on 
and off.BBE High Definition Sound 
restores clarity and presence for better 
speech intelligibility and musical realism.
•  
Auto Volume (ON/OFF):
This function automatically equates the 
sound volume of each position. It is used 
to prevent the sharp volume change when
you change the channel.
SoundSound
Bass
Tr e b l e
Balance
BBE
0 205
ON
Auto VolumeOFF
23Volume
3 3Press or to adjust.
4 4Press the MENUbutton to exit.
Sound settings will be automatically 
stored when you exit the menu.
Timer Setting
1 1
Press the MENU button, and select 
“Timer” menu with or .
(To display “TIMER” menu directly, press 
the TIMERbutton on the remote control.)
2 2Select “OFF timer” with .
TimerTimer
Alarm TimerOFF Timer- - : - -
- - : - -
When the TV set is turned off, Off Timer setting
will be cancelled.
The time changes in 30 minutessteps.
The maximum time is 2 hours.
When the time period is up, the time up
sign will appear on the screen and the
alarm will sound for about 15 seconds.
■Alarm timer setting
The alarm will ring for about 15 seconds
when you are watching the television and it
reaches at the set-up time. It may remind
you to do something. (This only happens
when the TV is switched on.)
■Off timer setting
The Off timer will switch the TV set into the
standby mode when the selected time has
elapsed.
3 3Press or to select “--:--”.
4 4Press or to set OFF timer.
5 5Press or to make row of OFF 
timer complete yellow.
6 6Press the OK button to store the setting.
Press the MENUbutton to exit, or press 
to set alarm timer.
TimerTimerOFF Timer- - : - -
- - : - -Alarm Timer
The time changes in 5 minutesteps.
The maximum time period is 3 hours.
2 2Press or to select “--:--”.
3 3Press or to set Alarm timer.
5 5Press the OK buttonto store the setting.
Press MENUbutton to exit.
To stop the alarm sound and
to erase alarm sign, press
one of the buttons of the
remote control or TV set.
Timer
4 4Press or to make row of Alarm 
timer complete yellow.
When the TV set is turned off, Alarm timer
will be cancelled.
1 1Select “Alarm timer” with in the 
Timer menu.
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 15
 
						

							16 16
Preset Menu
Use Preset Menu to tune new channels, to
re-order channels and their programme
positions, and to make fine tuning.
Up to 255 broadcast stations can be stored.
Auto T Auto T
uning uning
Menu Operation
Setting Menu
1 1
Press the MENUthen or button to
select “Setting” menu.
SettingSetting
Noise Reduction
Teletext Language
OSD Language
AV 2Child Lock
OFF
A Min
Video
English
3 3Press or to set each option.
4 4Press the MENUbutton to exit.
These settings will be automatically 
stored when you exit the menu.
PresetPreset
Prog. Preset
Swap
Fine TuningAuto Tuning>
P P
>- - -< >
1 1Press the MENU button, and select 
“Preset” menu with or .
2 2Select “Auto Tuning” with
.
3 3Press to enter the Auto Tuning mode,
and “Frequency” will be selected first.
P PAutoAuto
System
Sound
Frequency
007
Auto
BGPosition271.65 MHz
•   
System (Colour System):
You can change the colour system 
with or
.(Auto, PAL, SECAM, 
NTSC4.43 or NTSC.) 
•   
Sound(Sound System):
You can change the sound system 
with or
.(BG, DK, I or M.)
Auto Tuning can be cancelled at any time by
pressing the 
MENUbutton.
5 5Press the MENUbutton to exit.
This setting menu gives you several options
to adjust.
4 4Press to start tuning.
All the available stations are automati-
cally stored, starting from position 1.
After completing this procedure, TV set 
returns to programme position “1”.
• 
 
Child Lock (ON, OFF):
You can prevent that a small child 
operates television with the front control 
button of the TV set. When the power plug
is pulled out, this function is cancelled.
•  
Noise Reduction :
(Displayed only on TV mode.)
You can choose noise reduction 
mode; OFF, Min, Med or Max.
•  
Teletext Language :
You can choose your text language, select
A or B.
A=English, Arabic and Cyrillic.
B=English, Persian and Cyrillic.
• 
 
OSD Language :
This is useful if you wish to change the 
On-screen display language (
English, 
, Dutch, Suomi, Deutsch, Hrvatski,
Dansk, Greek, Magyar, Italiano, Polski, 
Português, Español, Svenska or Cesky
).
•  
Setting of AV2 input mode :
When you use a S-VHS VCR, you should 
connect it to AV2 and change the AV2 
menu to “S-Video”.
2 2Press to select a content.
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 16
 
						

							17 17
Menu Operation
Semi-auto T Semi-auto T
uning uning
This is used to preset a channel in any pro-
gramme position.
1 1Select “Prog. Preset” with in the 
Preset menu.
PresetPreset
Swap
Fine Tuning
Auto Tuning>
P P
< >
Prog. Preset>- - -
SemiSemi
Sound
P P
System
BGAuto 007
Position Frequency
271.65 MHz
Fine T Fine T
uning uning
PresetPreset
Swap
Auto Tuning>
P P
Prog. Preset>
Fine Tuning< >- - -
2 2Press and hold or to fine tune a 
channel.
3 3Press the MENUbutton to exit.
The tuning will be stored when you exit 
the menu.
Any changes made by fine tuning will
remain even when the TV set is turned off.
3 3Select “Position” with .
To select desired programme position:
Press the Digit(-/--) button and enter 
the position number (000-254) using 0-9
buttons.
or
Press to select programme
position sequentially.
6 6Select “Memory” with , and press the
OKbutton to memorize.
7 7Press the MENUbutton to exit.
Repeat steps 3-6 to store other channels in
other programme positions.•
If the clear picture cannot be obtained, 
change the colour system with or
.
•
If the sound is not clear or no sound is 
produced, change the sound system 
with or
.
1 1Select “Fine Tuning” with in the 
Preset menu.
2 2Press to enter the Semi-auto Tuning 
mode.
SemiSemi
Sound
Skip
P P
System
MemoryOK? OFF BGAuto 010
Position
Frequency
273.25 MHz
5 5You can either...
a)Press the Digit(-/--) button, and enter 
the frequency (5 digits) using 0-9
buttons referring channel table.
b)Press and release (toward the lower
frequency) or (toward the higher 
frequency) to search a TV station.
Once a station is found, tuning will stop
automatically. Repeat until desired 
station is found.
SemiSemi
Sound
Skip
P P
System
MemoryOK? OFF BGAuto 010
Position
Frequency
273.25 MHz
4 4Select “Frequency” with .
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 17
 
						

							18 18
Menu Operation
1 1Select programme position eg.3.
PresetPresetAuto Tuning>
P P
Prog. Preset>
Fine Tuning< >Swap- - -
4 4Press the OKbutton to memorize, and 
the programme number disappears.
The channels are now swapped.
5 5Press the MENUbutton to exit.
Channel Swapping Channel Swapping
Use this feature to swap the channels
between two stored programme positions.
This feature is particularly useful after auto-
matic tuning.
First of all, you have to select a programme
position you wish to swap. eg. swap pro-
gramme position 3and 12.
2 2Call up the Menu display, and select 
“Swap” of the Preset menu with .
3 3Enter new programme position number 
eg.12by pressing 0,1and 2numeric 
buttons.
Setting of the Skip Channels Setting of the Skip Channels
If there are positions you do not use, by set-
ting skip channel function, it is possible to
jump over any position when you are select-
ing a channel using the Programme Up/
Downbutton.
1 1Select “Position” in the Semi menu.
SemiSemi
Sound
Skip
P P
System
MemoryOK? OFF BGAuto 007
Position
Frequency
271.65 MHz
3 3Select “Skip” with , and set Skip “ON”
with or .
(To cancel skip channel, set Skip “OFF”.)
4 4Select “Memory” with , and press the
OKbutton to memorize.
5 5Press the MENUbutton to exit.
2 2Select programme position you want to 
skip.
To select desired programme position:
Press the Digit(-/--) button and enter 
the position number (000-254) using 0-9
buttons.
or
Press to select programme
position sequentially.
AUTO
BG
SemiSemi
Sound
P P
System
MemoryOK? ON BGAuto 010
Position
Frequency
273.25 MHz
Skip
03
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 18
 
						

							19 19
Setting of the Hotel Mode
The Hotel Mode is a feature that might be
needed by a hotel management to confine
the TV that put in the hotel room, so it will
not disturb other rooms.
Setting Procedure
1 1
Set the desired maximum sound volume 
by pressing the Volume + or 
-button.
P
Pr
ro
oh
hi
ib
bi
it
ti
io
on
nO
ON
N
Start-Position OFF
2 2Press and hold the Recall/Colour 
Systembutton on the remote control 
and press the Programme Upbutton
on the TV set.
3 3Select desired item with or , and 
set the option with or .
4 4Press the Recall/Colour Systembutton
to exit. • 
 
Prohibition (ON, OFF):
Current volume will be set as the maxi-
mum volume, and channel tuning is 
prohibited.
•  
Start-Position :
Setting of the start up programme 
position when the TV is turned on.
OFF:Last programme position start.
P1:Programme position “1” start.
P2:Programme position “2” start.
P3:Programme position “3” start.
P4:Programme position “4” start.
P5:Programme position “5” start.
P6:Programme position “6” start.
P7:Programme position “7” start.
P8:Programme position “8” start.
AV1:“AV1” start.
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 19
 
						

							20 20
CS
Teletext Operation
Sub page access
Some text pages are made up
of several sub pages which
rotate automatically. If you
wish to view page-4, press the
Sub Pagebutton, and “S----”
will appear. Then enter “0004”
using NUMERICbuttons.
T
eletext / TV selector
To switch TV, TEXT and PAT
(Picture and Teletext) mode.
Direct access to subject
headings
Coloured boxes are displayed
at the bottom of the screen.
The 4 coloured buttons give
access to the corresponding
subjects or pages. Inde
x page selector
To select one of the teletext
index pages.Siz
e switch
Either the top half or the 
bottom half of the page can
be expanded.Up/do
wn page access
To select the next or previous
page number.
Reveal switch
To reveal hidden items on the
text page e.g. a hidden
answer to a quiz question.
Direct access to a pa
ge
To select a page number
directly using the (0-9)
NUMERIC buttons. For exam-
ple, to select page 301, press
3, then 0 and then 1.
Hold
To stop sub pages from changing.
Teletext language selection
You can select a teletext language. Please return to the TV mode. (See Setting menu.)
Teletext brightness level
You can change the teletext brightness level. Please return to the TV mode. (See Picture
Adjustments.)
Sound volume control in teletext mode.
In teletext mode, sound volume and sound muting can be controlled. However they are not
displayed on the screen
Teletext reception
If your aerial signal is poor, the teletext reception may be poor.
Cancel
To view the TV picture in the
teletext mode while waiting for
sub page to change or page
to update. Press again to
return to teletext mode. (Note:
The page number will appear
when the page is updated.)
TELETEXT
DISPLAY
(Picture and Teletext mode)
Inst. Manual_N2WW(UE2-A)  5/30/05 3:08 PM  Page 20