Home > Sanyo > Television > Sanyo Lcd 26xr7 Instruction Manual

Sanyo Lcd 26xr7 Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sanyo Lcd 26xr7 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							TroubleshootingIf your problem is not solved, restart your TV by turning it off and then on again once.
    Never attempt to repair a defective TV yourself.Note:SymptomsCheck item=
    This may be caused by obstruction to the  due to high rise buildings or hills. 
    Using a highly directional antenna may improve the picture. antenna Ghost  or double images=
    Check that the  AC power cord is plugged into the mains socket.
    =
    Unplug the power cord, wait for 60 seconds. Then re-insert plug into the mains 
    socket and turn on the unit again.No power=
    Check antenna connections at the rear of the unit to see if it is properly connected 
    to the unit.
    =
    Possible broadcast station trouble. Try another channel.
    =
    Adjust the contrast and brightness settings.
    =
    Select a correct input.
    =
    Is a non-compatible signal being input?No picture=
    Increase the VOLUME.=
    Check that the unit is not muted.Good picture but no sound=
    Adjust the contrast, colour and brightness settings.Good sound but poor colour=
    Sometimes, poor picture quality occurs when having activated an S-VHS camera or 
    camcorder connected and having connected another peripheral at the same time. In 
    this case, switch off one of the other peripherals.
    =
    Check whether the room is too brightPoor picture=
    Check the antenna connection.=
    This may be caused by electrical interference (e.g. hairdryer, nearby neon lights, 
    etc.)
    =
    Turn off the equipment.=
    Check whether the batteries are working. Replace if necessary.
    =
    Clean the remote control sensor lens on the unit.
    =
    Do not use the remote control under strong or fluorescent lighting.
    =
    The batteries should be inserted with polarity (+, -) aligned.Snowy picture and noiseHorizontal dotted lineTelevision not responding to
    remote control=
    Check if you have selected the correct VGA mode in your PC.No stable or not
    synchronized VGA pictureNo output from one of the speakers=
    Adjust Balance in the SOUND menu.Before calling for repair service, check the following items for possible remedies to an encountered 
    symptom.28Control buttons do not work=
    Unplug the power cord, wait for some seconds. Then re-plug the power cord and 
    turn on the unit again.+ Do not use in hot and cold rooms (locations)
      When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not 
    a malfunction, and the unit will recover when the temperature returns to normal.
      Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as 
    this may cause the cabinet to deform and the LCD panel to malfunction.
    (Storage temperature:  0°C to +50°C  Working  temperature: 5°C to +40°C ) 
    						
    							 Care and MaintenanceLCD Display panel informationThe marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by 
    Warranty. This product is not designed to display fixed image  patterns for extended periods of time.Note:  Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
    The extended use of fixed image program material can cause a permanent shadow image on the LCD panel.
    This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel 
    deterioration can be limited by observing the following steps:
    A. Reduce the brightness/contrast setting to a minimum viewing level.
    B. Do not display the fixed image for extended periods of time.
    C. Turn the power off when not in actual use.Cleaning and MaintenanceTo clean this unit, wipe with a soft, dry cloth.
    If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.
      Use eyeglass cleaner to remove stubborn dirt from the LCD.
      Never use alcohol, paint thinner or benzine to clean this unit.
      Before using a chemically treated cloth, read the instructions that came with the cloth carefully.29 
    						
    							30SpecificationsDesign and specifications are subject to change without notice.Type:                                    LCD TV
    Display Size diagonal:         26  
    						
    							SANYO Electric Co., Ltd.5944029010Ver. 1.0 
    						
    All Sanyo manuals Comments (0)

    Related Manuals for Sanyo Lcd 26xr7 Instruction Manual