Sanyo Lcd 19xr7 Instruction Manual

Remote Control1. POWER
Turn the unit on or off
2. Teletext
To enter or exit teletext mode (Teletext)
3. Hold
To hold the current teletext page temporarily (Teletext) 
4. Reveal
To display hidden information such as solution to riddles and  
puzzles(Teletext)
5. Menu
To access the menu main page 
6. CH+/-(5/6),VOL+/-(3/4) , OK 
    CH+/-(5/6)
To select channels upward or downward; to move upward or downward in 
menu operation;
     VOL+/-(3/4)
    Used to adjust volume
     To move left or right in menu...

ConnectionsCautions before connectingCarefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.9Decoder21-pin SCART...

10Note:

Connections (continued)Connect AV or S-Video inputs11VCR
Video CameraExamples of external devices that can be connectedHome video
game systemNote:For better video, you can use the S-Video terminal if your source supports it. The S-Video is prior 
to Video terminal when they are connected at the same time. To view picture from the Video 
terminal, disconnect any plug from the S-Video terminal.The Video input terminal on the AV IN and the S-Video input terminal share the same Audio input terminals.1. Turn...

Connect a DVD playerConnections (continued)12Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD player.
Connect the Audio cable between  the AUDIO  input jack on the unit and AUDIO output jacks on the DVD player.How to connect a DVD Player using Component Video Connections:1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select YPBPR and press  or to confirm.
3. Turn on your DVD player, insert a...

Connections (continued)13Device with HDMI jackHDMI OUTPUTAudio cableD-Sub cablePCConnect a HDMI deviceConnect a PC1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select VGA and press  or to confirm.
3. Turn on your PC and check for PC system requirements.
4. Adjust the PC screen.34To Watch the PC screenConnect a D-Sub cable between the D-Sub interface on the PC and the D-Sub 
interface on the unit.How to connect:1. Turn on your LCD TV , press SOURCE...

Turning the Unit On and OffTurning OnTurning OffWith the power on, press the Power     button on the remote control to turn off.
If you would like to cut off the power completely, press the Power Switch directly.Note:You can also use the Power     button on the Control panel on the main unit.
After you turn off the TV, you should wait for some seconds to turn the TV on again .Viewing the Menus and DisplaysViewing the MenusYour LCD TV has a simple, easy-to-use menu system that appears on the screen. This...

ÿSELÿADJÿEXITOSD  LANGUAGEOSD  H-POSITIONOSD  HALFTONEOSD  DURATIONMENUOSD  V-POSITION15  SEC504450SYSTEMSelecting Input Source SignalPress the SOURCE button to display the SOURCE menu .112VGA------Select signal from VGA (D-SUB) jack.
HDMI-------Select signal from HDMI/DVI terminals.
TV--------Select TV signal.
AV(or AV/SV)-------Select signal from AV IN or S-Video terminals.
SCART  1----Select signal from 21-PIN SCART 1 interface.
SCART2  AV-----Select signal from 21-PIN SCART 2  interface.
SCART2...

Memorizing the ChannelsYour LCD TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan through 
the channels.16CHANNEL  LABELD/KBefore you start AUTO SCAN, it is necessary to select a region firstly.Selecting a RegionPress  to . 3or4select a proper region according to your area4Press  MENU to display the menu main page.1Press repeatedly to select  menu, and press to access. 3or4TV-CHANNEL62Press or to select  item. 56repeatedly PROGRAM...

Memorizing the Channels (continued)17If you fine-tune a program manually, the AFC will be turned off automatically.Manual Fine TuningPress or to select FINE TUNING item. 564Press  MENU to display the menu main page.1Press 3 or 4repeatedly to select TV-CHANNEL menu, and press to access. 62Press or to select MANUAL SEARCH item, and press  to access. 56repeatedly 43Press and hold3 or 4 to fine tune till the best possible picture and sound 
are obtained.5TV - CHANNELÿSELÿADJÿEXITCURRENT...