Sanyo DP42861, DP46861 Hdtv Lcd Owners Manual
Here you can view all the pages of manual Sanyo DP42861, DP46861 Hdtv Lcd Owners Manual. The Sanyo manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 2
2Need help? www.sanyoctv.com 1-800-877-5032 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety...
Page 3
3Need help? www.sanyoctv.com 1-800-877-5032 PC RESOLUTION CHART FCC INFORMATION __________ This equipment has been tested and found to comply with the lim- its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may...
Page 4
4Need help? www.sanyoctv.com 1-800-877-5032 CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . 2 FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 SPECIFICATIONS . . . . . . . . . . . ....
Page 5
5Need help? www.sanyoctv.com 1-800-877-5032 Hook up your antenna or your cable service to the HDTV’s ANTterminal with the use of a 75 OHM coaxial cable. NOTE: Keep your indoor antenna at least 3 ft. away from the television set and any other electronic equipment. The tuner in this HDTV can receive: • Digital and Analog off air signals from an antenna • Analog or ClearQAM cable channels from a direct Cable TV connection. GETTING STARTED Install two (2) “AAA” batteries in the remote control....
Page 6
6Need help? www.sanyoctv.com 1-800-877-5032 GETTING STARTED HDTV INPUT/OUTPUT REFERENCE HDTV BACK PANEL 5 2 3 USB Input View pictures stored in a USB flash drive or connect to the inter- net with the USB Wireless dongle. NOTE: Please refer to the Internet Ready HDTV Guide for the proper connection methods. HDMI (INPUT1, INPUT2, & INPUT3) An all digital Audio/Video interface that can accept uncom- pressed video signals up to 1080p for the very best picture possible with the use of a single...
Page 7
7Need help? www.sanyoctv.com 1-800-877-5032 GETTING STARTED AUDIO / VIDEO CONNECTIONS DVD PLAYER (or similar device)VCR (or analog device) MULTICHANNEL RECEIVER NOTE: Audio/Video cables are not supplied Componentconnections will accept SDTV, EDTV and HDTV video signals. Use them for great image quality from digital devices. NOTE: Always match the color of your device’s output jack, the connector and the HDTV’s input jack.SATELLITE RECEIVER (or similar device) USB FLASH DRIVE OR DONGLE HDMI...
Page 8
8Need help? www.sanyoctv.com 1-800-877-5032 REMOTE CONTROL OPERATION Selects the video source to view. Turns your HDTV On or Off. Displays on-screen Help menu. Pressing it twice restores your HDTV to its factory settings. All user customized settings will be cleared. Cycles through the available aspect ratios. The different settings either stretch, zoom, or fill the image on your screen. Bars may appear on top and bot- tom of your screen (or on left and right sides) depending on the...
Page 9
9Need help? www.sanyoctv.com 1-800-877-5032 1. PLUG IN AC POWER CORD 120V AC, 60Hz 2. TURN ON TV (PRESS POWER BUTTON) Wait for on-screen instructions to set an Initial Energy Saving Mode, and perform an Initial Channel/Signal Search. 3. TV SET LOCATION SELECTION: Select “Home Mode” to set the HDTV’s backlight to an Energy Star qualified level, or select “Store Mode”to set the backlight to a retail display level. Press ENTERon the desired option to continue. 4. CHANNEL AND AV SIGNAL SEARCH:...
Page 10
10Need help? www.sanyoctv.com 1-800-877-5032 Video 2 Setting- Use this feature to establish either a Component or Composite connection to the VIDEO INPUT 2 jacks on your HDTV. Use the CURSORkeys to select the type of connec- tion you’ll use in VIDEO INPUT 2. Press ENTER, a blue mark will appear next to the select- ed option indicating it is the active option. HDMI CEC- Use the HDMI-CEC Functionto enable or disable all available CEC functions. HDMI Power ON Syncand Power OFF Syncenable...