Sanyo DP32242 HDTV LCD User Manual

							11
English
POWER CONNECTION/CHANNEL SEARCH
5 TV will begin the scanning Progress.
If no channels found, TV will show below  
message.
OKSkip
No channels found. Please cjeck if Antenna or 
Cable signal is available. Select ‘Skip’ if Satellite
or cable box is used to recevie channels.
 
While doing scanning, pressing MENU or EXIT  
key will pop up below message. 
 
OKEnter
EnterMove
Quit auto program?
Yes
No
6 If Skip is selected, TV will display as below  
message.
 
If you wish to perform a scan, select Auto  
program on ANT/Cable setup menu on Setup  
menu. 
Setup
ANT in CableAuto program Manual programSignal meter
 
INITIAL SETUP
1 8VHWKH&85625
xDQG
zEXWWRQVWRKLJKOLJKW 
preferred Language (English / Español / Français). 
Press the 
OK button.
Language / Idioma / Langue Page  1/4
MoveEnterOK
EnglishEspañolFrançais 
2 8VHWKH&85625
xDQG
zEXWWRQVWRKLJKOLJKW 
preferred viewing mode Store Demonstration or 
Home Use . Press the  OK button. 
 
3 8VHWKH&85625
{DQG
yEXWWRQVWRVHWXS$17 
Cable settings (Cable/Antenna/Not used). Press the 
OK button. 
ANT / Cable setup Page  3/4
Select “Not used” when viewing TV via Satellite recelver or Cable box. Note : Select “Cable” when viewing 
via Cable DTA Box.
AntennaNot usedCable
ANTENNA
Cable In
 
4 Use the CURSOR  
xDQG
z buttons to set auto 
program  Start or Skip . Press the  OK button. Select 
Start 
         
						

							12
English
ADVANCED DIGITAL SIGNAL  
CONNECTIONS HDMI TO HDMI
Connect compatible Digital devices such as a HD  
Cable Box, HD Satellite Receiver, DVD Player, and 
Game System. 
HDMI-High-Definition Multimedia Interface. 
This is a digital AV interface that accepts uncompressed 
video signals  for the best picture quality possibl e. It 
supports HDCP copy protection and allows transmissi on 
of copy-protected digital content.  
The signal can also include PCM audio, when availab le.
1 Connect the HDMI input and your external  
device with HDMI cable. 
NOTE : Press the INPUT button to select the input signal 
as HDMI1,HDMI2 or HDMI3(only for 46).
DVI TO HDMI
(ONLY HDMI1 IS COMPATIBLE WITH THIS FUNCTION)
1 Use an adapter (not supplied) to connect a DVI  
device to a HDMI1 input jack.
NOTE : HDMI Audio setting is necessary. Please see p14.
ANTENNA CABLE IN
HDMIHDIGITAAUDI
OUCOMPONENT IN VIDEO IN
Y/VIDEO P
B
PRL
R
AV IN
AUDI
BACK-SIDE VIEW OF HDTV
SATELLITE   RECEIVER PC
DIGITAL AUDIO
1 Connect the Digital Audio output to a  
multichannel receiver as shown.
NOTE:  Dolby  Digital  audio  signal  is  available  from 
the 
Digital  Audio output terminal only when receiving  
as part of a Digital input on the screen.
ANTENNA CABLE IN
HHDIGITAAUDI OUCOMPONENT IN VIDEO IN
Y/VIDEO P
B
PR L
R
AV IN
AUDI
(Coaxial) 
DIGITAL  
AUDIO CABLE 
(Not supplied)
MULTICHANNEL  RECEIVER
BACK-SIDE VIEW OF HDTV
ADVANCED AV CONNECTIONS 
						

							13
English
ON-SCREEN MENU OPERATION
PICTURE / AUDIO / TIMER / LOCK / CLOSED CAPTION / SETUP
PICTURE ( Adjust the image or picture quality )
Function Items Description 
Picture mode Vivid
Provides enhanced picture contrast and sharpness for viewing in a  
well-lit room.
Standard Recommended for normal viewing conditions with subdued room 
lighting.
Cinema For watching movies in a darkened room. It provides a soft, film-l
ike 
picture.
Custom  Customize each item according to your taste.
Back light Adjusts the luminance of the back light.
Contrast, Brightness, Color, Tint, 
Sharpness Adjusts the color, brightness, etc. for each picture mode to sui
t your 
WDVWH‡LVSOD\UDQJH&RQWUDVW%ULJKWQHVV&RORU7LQW 
+50    Sharpness : 0 - 30
Game Mode  Off/On Allows optimum picture settings for gaming. (Except TV)
Color temp. Cool/Normal/Warm Selects a choice of Cool (blue), Normal, or Warm (re d) color.
A.I. picture  Off/On Controls dark area
Video NR Off/OnReduces noise, commonly called snow. Leave it off when receiving
 a 
strong signal.
MPGE NR Off/On Reduces noise of specific digital signals of DVD, Cabl e box, etc.
Pix shape FULL/H-FILL/
JUST/4.3/ZOOM/
NATIVEChanges the format (aspect ratio). Lets you choose the aspect  
depending on the format of received signal.
Reset to defaults Resets all picture adjustments to factory default s
ettings except for “Pix 
shape” 
						

							14
English
AUDIO ( Adjust Audio quality )
AudioBassTrebleBalanceSurroundVolume levelerTV speskersHDMI 1 inReset to defaults 0 00
Off 0
On
Digital
Function Items Description 
Bass Increases or decreases the bass response.
Treble Increases or decreases the treble response.
Balance Emphasizes the left / right speaker volume.
Surround Off/On Enhances audio L/R response when listening to stereo.
Volume leveler -7 ~ +7 Minimizes volume disparity after switching to external inputs.
TV speakers Off/OnSwitches to “Off” when using external speakers. Off: “Surround” and  
“Volume leveler” do not work if “Off” is selected.
HDMI 1 in Digital/AnalogThe default setting is “Digital” for the HDMI connection. (D
igital input 
signal) Select audio input terminal when DVI cable is connecte d.
(Use White and Red audio jacks as Analog audio input signa l)
Reset to defaults Resets Bass, Treble, and Balance adjustments to factory default  
settings.
TIMER
 ( The TV can automatically turn On/Off at the desi gnated date and time. )
TimerClock setting Sleep
Timer setImputChannelDayOn timeOff timeANT/Cable in
- - - - - -Off
- - : - -    - - 
- - : - -    - -
‡ If the Timer settings are grayed out, first set the clock complete ly.
Function Items Description 
Clock settingyear/month/day/hour/minute
Sleep Sleep(minutes) 
Off / 15 / 30 / 60 /  
90 / 120 / 150 / 180
Select how long for the TV to automatically turn off.
Timer set Enables or disables this timer. (Off/On)
Inputs Sets the input to select when the TV turns on.
Channel Sets the channel to select when the TV turns on.     
						

							15
EnglishDaySets the day when the TV turns on.[ SUN / MON / TUE / WED / T
HU /
FRI/SAT(displays the nearest future date)MON-FRI/SAT-SUN / DAIL Y 
/ Every SUN / Every MON / Every TUE / EveryWED / Every THU/  
Every FRI / Every SAT ]
On time Sets the time when the TV turns on. The TV will turn off af
ter 90 
minutes or as specified.
Off time Sets the time when the TV turns off within 24 hours.
LOCK ( Locks Specified Channels Or Shows To Prevent Chi ldren From Watching 
Objectionable Content. )
LockCreat password Enter password.
‡ You will be asked to enter your password each time you display t he Lock menu. 
‡ For password setting/entering please see p18.
‡ Set “Custom” in “Mode” to specify “Channel”, “Game” and “Program” settings.
Function Items Description 
Mode Off Unlocks all the Lock settings of “Channel”, “Game” and “Program”.
All Locks all the inputs regardless of the Lock settings of “Channel
”, 
“Game” and Program”.
Custom Locks specified inputs of “Channel”, ”Game” and “Program”.
Channel  
(These channels will  
be blocked regardless  
of the program rating.) Mode
Set channel lock status. (Off/All/Custom) All: Locks all channelsO
ff: 
Unlocks all channels Custom: Locks specified channels. Set “Channel  
1” - “Channel 7”
Channel 1-7 Select a channel to lock. (Select up to 7 (1-7) chann els to block.)
Game On/Off Locks Channel 3, Channel 4, and external inputs.
Program 
(To set a  rating level) Mode
Set program lock status. (Off/On) “V-chip” technology enables  
restricted shows to lock according to TV ratings. On: Set each ratin
g 
level (MPAA, US.TV, C.E.L.R., C.F.L.R.)
MPAA Select U.S. movie ratings to lock. 
U.S.TV U.S. TV program ratings. 
C.E.L.R. Canadian English ratings. 
C.F.L.R. Canadian French ratings.
Change password Change the password. Input the new 4-digit password twice.
‡ This television is designed to support the “Downloadable U. S. Region Rating System” when available.
(Available only in U.S.A.)
‡ The Off rating is independent of other ratings.
‡ When placing a lock on a specific-age-based-rating level, the O ff rating and any other more  restrictive ratings will 
also be blocked.
‡ It is downloaded and stored in memory and can be adjusted on  the program lock menu page 2. ( Page 2 only 
appears while detecting RRT5 data.)   
						

							16
English
CLOSED CAPTION ( Display closed caption. )
‡The television includes a built-in decoder that is capable o f providing a text display of the audio.
‡ The program being viewed must be transmitting the Closed capti on (CC) information.
Function Items Description 
ModeOn/Off/CC on muteOn: To display Closed captions.CC on mute: To display Closed
 
captions when the audio is muted.(When not using, select “Of f”).
Analog CC1-4/T1-4Choose the Closed caption service of Analog broadcasting.CC1-4
: 
Information related to pictures (Appears at the bottom of th e screen)
T1-4: Textual information (Appears over the entire screen)
Digital Primary/Second./ 
Service 3/4/5/6The Digital Closed caption menu lets you configure the way 
you 
choose to view the digital captioning.
Digital setting 
(Set display setting  
digital program Size Text size 
Font Text font 
Style Text style (Raised, Depressed, etc.) 
Foreground Color of text 
Fore. opacity Opacity of text 
Background Color of text box 
Back. opacity Opacity of text box 
Outline Outline color of text (Identify the setting option
s on the screen.)
Reset to defaults Yes / No Resets all Closed caption settings to factory default  settings
‡ The settings in “Analog” or “Digital” depend on the broadca ster. 
						

							17
English
SETUP ( Other function settings. )
Language ANT/Cable setupUSB photo viewerPower savingFirst time setupAboutReset to defaults
Function Items Description 
Language English/Español/ 
FrançaisSelects the screen menu language.
ANT/Cable setup See p.22 for more 
detailThe current channel settings can be changed accordi
ng to your needs 
and reception conditions.
USB photo viewer See p.19 for more 
detailYou can enjoy photo contents stored in a USB storage device.
Power saving No signal for 15 
minutes(Stay on/ 
Power TV off)
To conserve energy, the TV automatically turns off when NO SIGN
AL 
and NO OPERATION continue for more than 15 minutes.
‡ “No signal for 15 minutes was activated” will be displayed for  about 
10 seconds when the TV is turned on for the first time after t he 
power was turned off by “No signal for 15 minutes”.
‡ The on-screen display will flash 3, 2 and 1 to indicate the  last three 
(3) remaining minutes prior to the shut-off.
No activity for 4 
hours(Stay on/ 
Power TV off) To conserve energy, the TV automatically turns off when no ope
ration 
of remote and side panel key continues for more than 4 hours.
‡ No activity for 4 hours was activated” will be displayed for abo ut 10 
seconds when the TV is turned on for the first time after the  power 
was turned off by “No activity for 4 hours”.
‡ The on-screen display will flash 3, 2 and 1 to indicate the  last three 
(3) remaining minutes prior to the shut-off.
First time setup Restarts the first time setup from “Language” setting.
About Displays TV version.
Reset to defaults Yes / NoPerforming Reset will clear all settings made with Setup, such a
s 
channel settings.
‡ Password setting/entering, please see p18. 
						

							18
English
LISTEN WITH SECONDARY AUDIO PROGRAMMING
 

v Select the Audio mode for watching TV
Digital mode
Press the  AUDIO button to select all available audio 
service (if available).
‡ Audio information is displayed in banner for the first 
time.
‡ When pushing  AUDIO key twice, audio information 
and actual output audio from speaker will change.
Analog mode
Press the  AUDIO button to select Audio mode.
Each press of  AUDIO key will change the Audio 
mode. ( Stereo / SAP / Mono )
‡ AUDIO  is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
‡ Contact your Cable or Satellite operator for  
instructions on enabling SAP with their box.
CLOSED CAPTION
 

v Switches the Closed Caption mode On or Off. 
Press the 
CAPTION button to select  Closed Caption 
menu.( Closed caption Off / Closed caption on / 
Closed caption on mute )
‡ Closed Caption is not available when watching TV  
with a Cable or Satellite box connected via HDMI.
‡ Contact your Cable or Satellite operator for 
instructions on enabling CC with their box.
GUIDE FEATURE
When viewing the TV, press GUIDE button to display  
the information window about the current channel on  
your HDTV screen.
‡ This feature is only for digital channels.
DISPLAYING INFORMATION
 

v Displays and removes information. When  
watching programming via the Antenna/Cable 
input, shows the channel banner. 
USEFUL FUNCTIONS OPERATION 
CHANGE ASPECT RATIO AND ZOOM THE PICTURE
Press the  PIX SHAPE  button to cycle through the 
aspect modes.
‡ ATV \ Video \ DTV \ HDMI \ Component (480i) :  
FULL / JUST/ 4:3/ ZOOM
‡ DTV \ Component (except 480i) :  FULL/ H-FILL/ 
JUST / 4:3/ ZOOM
‡ HDMI (except 480i) :  FULL/ H-FILL/ JUST / 4:3/ 
ZOOM / NATIVE
‡ HDMI (DVI) :  FULL / 4:3
Use when the picture does not fill the whole screen  (bars 
appear on either side of the image) or portions of the  
picture is trimmed. 
Note:
‡ Some content, such as film-based movies, are  
available in extra-wide format. Top and bottom bars are 
unavailable.
‡ Connected devices, such as Cable/Satellite box, DVD/ 
Blu-ray players and game consoles have their own  
aspect (format) settings. Adjust the device’s aspect 
settings.
OTHER USEFUL OPERATIONS
ENTERING CHARACTERS
You can use the remote control keys to enter the  
alphanumeric characters.
Switches input mode
Press each number key to cycle through the 
alphanumeric character.
PASSWORD SETTING/ENTERING
You need to enter the password when you access  
locked channel or inputs. 
Press (0 - 9) Number button to input your 4-digit p assword.
LockCreat password Enter password.   
						

							19
English‡If it is your first time entering the password, enter  
the password twice in order to register it.
‡ Make a note of your password. Do not forget it. (If 
you have forgotten your password, consult your 
local dealer.)
‡ When you select a locked channel, a message will 
be displayed that allows you to view the channel 
after you input your password.
CALL UP A FAVORITE CHANNEL
Favorite
Channel numbers registered in Favorite are displayed  
on the favorite tune screen. Select the desired bro adcast 
station with the cursor or use the number buttons.
1 Press  FAVORITE  button to display menu.
2 8VHWKH&85625
xDQG
zEXWWRQVRU 
Number key to select your favorite channel. Press  
the OK button.
To change the page
3UHVV&85625
{DQG
y  button  to change pages (1/3, 
2/3, 3/3). 
Note:
‡ Favorite channels cannot be set when using Cable or  
Satellite box.
ENERGY SAVING MODE
Press  ECO button to select Energy saving mode options 
Off and On in turn.
SLEEP TIMER
Press  SLEEP  button to set Off Timer function among 
Off, 30 min, 60 min, 90 min, 120 min,150 min and 180  
min. 
Note: 
‡7KH2II7LPHUZLOOEHFDQFHOHGZKHQWKH79LVWXUQHG 
off or when a power failure occurs.
USEFUL FUNCTIONS OPERATION (CONTINUED) 
RESET TO DEFAULT
Press  RESET  button to enter password and display 
RESET menu. If you execute RESET function, the TV  
will clear all customized settings.
 
Note: 
‡7KH&KDQQHO6FDQ0HPRU\GDWDEDVHZLOOEHUHVHWWR 
default (all analog channel enabled). You will need to  
execute Auto program after RESET.
WATCHING CONTENT FROM  
EXTERNAL DEVICES
1 Press the  INPUT button to display input menu.
2 Press the corresponding (0-9) NUMBER buttons on 
the remote control to select the input of your choice.  
Or, press the  INPUT button repeatedly to cycle 
through the available inputs.
 
3 Select the input of your choice, Press the  OK 
button.
Note:
‡ During the selection, if no action is taken for several  
seconds, the “Input select” menu disappears.
USB PHOTO VIEWER
There are two methods for starting the Photo Viewer.
Automatically:
Gently insert a supported USB storage device to the  
USB port on the rear side of the TV. A prompt will 
appear.
1 USE CURSOR 

{DQG
y buttons to select  Yes. 
Press the  OK button then Photo Viewer menu will 
appear. When you select  No, nothing happens. 
						

							20
English
USEFUL FUNCTIONS OPERATION (CONTINUED) 
Note:
‡The prompt will disappear after about 10 sec.
‡ If you repeatedly insert and remove the USB device, the 
prompt may not appear.
Manually:
1 Firstly, insert the USB flash memory into USB Port.
2 Press  MENU  button on the remote control and use 
the CURSOR  
{DQG
y buttons to select  SETUP 
menu. Press the  OK button.
3 8VHWKH&85625
xDQG
zEXWWRQVWRKLJKOLJKW 
USB photo viewer  function. Press the  OK button.
4 The USB photo viewer will appear. Press  OK 
button. When you do nothing, it will disappear after  
few seconds.
Note:
‡ The viewer will also open even if there are no photo file
s.
‡ While the USB Photo Viewer is active, the main menu  
cannot be displayed.
VIEWING PHOTOS
There are three types of view modes.
Multi View:
This view allows you to search for photos in a grid  
format. These pictures are displayed using thumbnail  
data in each image file.
1 3UHVV&85625
x
z
{
y  to move the highlight 
in one window. If all of the photos will not fit in  
one screen, when pressing CURSOR  
{ button 
at the top left thumbnail, the screen will move to  
the previous page. Conversely, when pressing 
CURSOR  
y button at the bottom right thumbnail, 
the screen will move to the next page.  CH+ and CH-
buttons can be used to page up/down the photo list 
when there are more photos than will fit onto one 
screen.
Photos
/USB/
Navigate09110807538cdac9e6053c973b.jpgDate : 04-30-2006 14:39:55 1440X900OKSelectCHPage BackR
2 When you select a folder, press  OK to move to the 
next layer.
3 When you select a photo. Press  OK to view the 
selected photo in Single view mode.
Single View:
In this view mode, only files located in the selected  
directory shall be displayed. This view allows you to 
change the photo content manually. When moving from 
Multi View to the Single View, the currently selected  
photo shall be displayed.
1 Use CURSOR  
ybutton to view the next photo. Use CURSOR  
{button to view the previous photo.
2 Use CURSOR  
xbutton to rotate the image 90° 
counterclockwise. Use CURSOR  
zbutton to rotate 
the image 90° clockwise.
Slideshow:
This view allows you to watch a slideshow of the 
photos. In this mode, only files located in the selected 
directory will be played.
1 To start slideshow, press  OK button in the Single View 
mode. You can see the state of Sildeshow is On or Off  
at the right bottom.
Date : 10-22-2006 13:48:10 1440X900
BackRMENUPhotos menu
Slideshow off
Date : 10-22-2006 13:48:101440X900
BackRMENUPhotos menu
Slideshow on
2 Use CURSOR 
{DQG
y buttons to view the previous 
or next photo.
To set Display interval and Repeat settings:
Gently insert a supported USB storage device to the  
USB port on the rear side of the TV. A prompt will 
appear.
1 Press  MENU  button to open the  Photos Menu. 
2 Use CURSOR  
xDQG
z buttons to select either 
Display interval  or Repeat .
3 Use CURSOR  
{DQG
y buttons to adjust the 
setting and press  MENU button.
To close the Photo Viewer:
1 Press EXIT button then television will return to the 
last viewed channel or external input.