Sanyo 52lh1wp Instruction Manual

CE52LH1WP
Instruction Manual
Manuel dutilisation
Manual de instrucciones
LCD Monitor
Moniteur daffichage à cristaux liquides
Monitor de LCD
Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor.
Veuillez lire attentivement ce mode d’emploi avant d’utiliser votre moniteur d’affichage à cristaux liquides. Nous espérons que votre
nouveau dispositif daffichage vous procurera de nombreux instants de bonheur.
Lea este manual de...

2
SAFETY SAFETY
PRECAUTIONS PRECAUTIONSGB
Do notallow anything to rest on the power
cord. Do notlocate this LCD monitor where
the cord will be damaged by people walking
on it.
Do notoverload wall outlets and extension
cords as this can result in fire or electric
shock.
A suitable socket outlet must be provided
near to the monitor and shall be easily accessible.
Do notplace this LCD monitor near any heat sources such as
radiators, heaters, stoves and other heat-generating products
(including amplifiers)....

3
Important recycling information.
Your SANYO product is designed and 
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be 
disposed of separately.
In the European Union there are separate 
collection systems for used electrical and 
electronic products.
Please help us to conserve the environment we live in! 
Note:This symbol mark and recycle system are applied only to
EU...

4
GBGB
The product (meaning the equipment or appliance to which this
documentation relates) incorporates Software (the software 
applications, utilities and modules embedded within the Product)
which is owned by Sanyo or its licensors. Before using the product,
please read the   End-User License Conditions detailed below. If you
do not agree to the terms and conditions of the End-User License,
Please do not proceed to use the Product- repack the Product
unused and return it to your supplier together with...

5

 Connect the display unit to VGA, BNC and Scart  connector as
required. 
1. Connect the in-line power connector to the Mains Inlet as shown
above.
2.Connect the power cord of the LCD monitor to a suitable wall
outlet. 
As this product does not have a mains On/Off switch, please
ensure your mains plug is easily accessible.
The LCD monitor is prepared for a mains voltage AC100~240V,
50Hz/ 60Hz. To completely switch off the mains, or when the 
display unit is not to be used for an extended period of...

6
REMOTE CONTROL REMOTE CONTROLGBGB
Remote control battery installation
Install two AA 1.5 volt batteries so that the + and  - marks on the
batteries match the + and - marks inside the unit into the remote
control handset.
Standby
To switch the monitor on and off. Also see page 7.
Recall
To display input selection information and the Time set.
You can also select colour systems in AV1 / AV3 mode as 
follows:  AUTO-> PAL -> SECAM -> NTSC -> NTSC4.43 ->
PAL M ->PAL N.
It can also be automatically adjusted...

7
1. The LCD display has a Standby light to show there is power.
Switching into/from standby modeThe Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
To turn the monitor into standby mode, press the 
4
4 button.The blue power indicator illuminates more brightly.
To turn the monitor ON from standby mode, press the 
4
4 
button again.
2.Control buttons (bottom corner of back cover)
Menu...

8

Advanced settings
Use the 5or 6buttonto select Advanced settings and press
the 1or 2button to enter the sub menu as follows.
DCDi(Directional Correlational Deinterlacing) is used to process 
moving angled edge in deinterlacing to get the smoothest and most 
natural image. Press the 1or 2button on the remote control
to select Onor Off.
ACC/ACM(ACC: Adaptive Contrast and Color; ACM-II: Active Color
Management-II) is used to select adaptive Brightness, Contrast and
tone control. Press the 1or 2button on...

9

PIP/POP Setup
Use the 5or 6buttonto select PIP/POP Setup and press the
1or 2button to enter the sub menu.
PIP/POP Mode:Using the 1or 2buttonselect the most
suitable mode PIP1, PIP2, POPor Off. (Please refer to page 12.)
 
When Modeis set to Off, Sub Sourceand PIPPosition will not 
work. 
Main Source is used to select input source (AV1, RGB,  AV2, AV3,
PC, DVI or Network ) for main picture by using the 1or 2
button.
Sub Source is used to select input source (AV1, AV2, AV3, PC or
DVI ) for sub picture...

10
This LCD monitor allows you to set up the following:
SETTINGPROCEDURE
1.Press and hold theGREEN button on the remote control for 5
seconds. (Installation Mode will appear)
2. 
Use the 5or 6button to highlight each option, use the 1or
2button to adjust each option.Press the MENU button to exit
the mode.

 On Program
Select ON program using the 
5or 6button, select the start up
position using the 1or 2buttons. 
(Off/ AV1/ RGB/ AV2/ AV3/ PC/ DVI or Network)

 Max Volume
Select Max volume using the 5or...