Samsung Xpress C460W Manual

Wireless network setup
1712.  Using a Network-Connected Machine
6 Select Using a direct wi reless connection on the  Select the Wireless 
Setup Method  screen. Then, click  Next.
 
Even if your computer is running Windows 7 or higher, you cannot use this 
feature if your PC does not support  wireless network. Set the wireless 
network using a USB cable (see "Access point via USB cable" on page 166).
 
If below screen appears, press the   (WPS) button from the control 
panel within 2 minutes.
7...

Wireless network setup
1722.  Using a Network-Connected Machine
Ad hoc via USB cable
If you do not have an access point (AP), yo u may still connect the machine 
wirelessly to your computer  by setting up an ad-hoc wireless network by 
following the si mple steps below.
Items to prepare
• Network-connected computer
• Software CD that was pr ovided with your machine
• A machine installed with  a wireless network interface
• USB cable
Creating the ad hoc network in Windows
1Turn on your computer and  the...

Wireless network setup
1732.  Using a Network-Connected Machine
4 Select Wireless network connection  on the Printer Connection Type  
screen. Then, click  Next.
5 On the  Are you setting up your pr inter for the first time? screen, select 
Yes, I will set up my pr inter's wireless network.  Then, click Next.
If your printer is already co nnected on the network, select  No, my 
printer is already connected to my network.
6 Select  Using a USB cable  on the  Select the Wireless Setup Method  
screen....

Wireless network setup
1742.  Using a Network-Connected Machine
8 The window showing the wireless network setting appears. Check the 
settings and click  Next.
 
Before entering the IP address for the machine, you must know the 
computer’s network configuration info rmation. If the computer’s network 
configuration is set to DHCP, the wireless network setting should also be 
DHCP. Likewise, if the computer’s networ k configuration is set to Static, the 
wireless network setting should also be Static.
If...

Wireless network setup
1752.  Using a Network-Connected Machine
16 
Setup using Mac
Access point via USB cable
Items to prepare
• Access point
• Network-connected printer
• Software CD that was provided with your machine
• A machine installed with  a wireless network interface
•  USB cable
1Make sure that the machine is  connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM  icon that appears on your Mac desktop.
• For Mac OS X...

Wireless network setup
1762.  Using a Network-Connected Machine
10 Select Configuration of Wireless network  on the Printer Connection 
Type  and click  Continue . 11 If Wireless Settings  screen appears, select  Using a USB cable and click 
Next . 
If the screen does not  appear, go to step 15. 

Wireless network setup
1772.  Using a Network-Connected Machine
12 After searching, the window shows the wireless network devices. Select 
the name (SSID) of the access p oint you want to use and click Next.
 
When you set the wireless co nfiguration manually, click Advanced Setting .
• Enter the wireless Network Name:  Enter the SSID of the access point 
(SSID is case-sensitive).
• Operation Mode:  Select Infrastructure .
• Authentication:  Select an authentication type.
Open System:  Authentication is...

Wireless network setup
1782.  Using a Network-Connected Machine
Access point without a USB cable (recommended)
Items to prepare
• WiFi-enabled Mac running Mac OS 10.7 or higher and an access point 
(router)
• Software CD that was pr ovided with your machine
• A machine installed with  a wireless network interface
1Make sure that the machine is  connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM  icon that appears on your Mac...

Wireless network setup
1792.  Using a Network-Connected Machine
11 If Wireless Settings screen appears, select  Using a direct wireless 
connection  and click Next.
If the screen does not  appear, go to step 13. 
If below screen appears, press the    (WPS) button from the control panel 
within 2 minutes.
 
12 When the wireless network  set up is completed, click Next. 
13 After the installation  is finished, click Close. 

Wireless network setup
1802.  Using a Network-Connected Machine
Ad hoc via USB cable
If you do not have an access point (AP), yo u may still connect the machine 
wirelessly to your computer  by setting up an ad hoc wireless network by 
following these simple directions.
Items to prepare
• Network-connected computer
• Software CD that was pr ovided with your machine
• A machine installed with  a wireless network interface
• USB cable
Creating the ad hoc network in Mac
1Make sure that the machine is...