Samsung UN55MU6300 User Manual
Have a look at the manual Samsung UN55MU6300 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
- 66 - ●Tint (G/R) ●Apply Picture Settings ●Digital Clean View ●Auto Motion Plus Settings "When LED Clear Motion is set to On, the screen appears darker than when it is Off. ●Local Dimming "This function is not available on certain models in specific geographical areas. ●Contrast Enhancer ●HDR+ Mode Automatically provide an optimal HDR effect based on the video source. The HDR (High Dynamic Range) technology implements video images that are very similar to the images seen through human eyes by finely adjusting the contrast of the source. "This function is only available on certain models in specific geographical areas. ●Film Mode "This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI (1080i). ●Color Tone "Cool and Standard are only available when Picture Mode is set to Dynamic. "Color Tone is only available when the TV is connected to a computer via an HDMI-to-DVI cable. ●White Balance ●Gamma ●RGB Only Mode ●Color Space Settings ●Reset Picture
- 67 - Setting the Viewing Environment for External Devices You can optimize the TV for viewing specific video formats. Playing games on an optimized screen Settings General External Device Manager Game Mode You can enable game mode to optimize the TV's settings for playing video games with a gaming console, such as a PlayStation™ or Xbox™. "The game mode is not available for normal TV viewing. "The screen may shake somewhat. "When Game Mode is enabled, Picture Mode and Sound Mode are switched to Game automatically. "To use a different external device on the same port, remove the game console connection, turn off Game Mode, and then connect the external device to the port. Viewing UHD videos Settings General External Device Manager HDMI UHD Color If an external UHD player is connected to the TV, use the HDMI UHD Color function to convert the TV's HDMI connector to a mode optimized for the UHD 50P/60P signals. "When you set the HDMI connection to On, the TV screen flickers. "The HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while the HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals. For more information, refer to "Supported Resolutions for UHD Input Signals." "When you connect the TV to an external device that supports only the UHD 24 or 30 Hz frequency or any FHD frequency, the HDMI UHD Color function may not be available. In this case, set HDMI UHD Color to Off. Using HDMI black level Settings General External Device Manager HDMI Black Level Use HDMI Black Level to adjust the black level to compensate for low black levels, low contrast, or dull colors generated by external devices connected to the TV via an HDMI cable. "This function is only available when the input signal, connected to the TV via an HDMI connector, is set to RGB444.
- 68 - Registering the TV as a DivX-certified device (watching for pay DivX movies) Settings General External Device Manager DivX® Video On Demand "Digital Rights Management (DRM) is a technical security mechanism that protects the content provider's copyright. "You can watch recorded movies or free DivX movies without registration. "Visit the DivX website (http://www.divx.com) and log in to your user account before registering the TV as a DivX-certified device. If you do not have an account, create one. Picture Support Functions Configure the picture settings for your TV. Changing the picture size Settings Picture Picture Size Settings Picture Size Try Now You can change the size of the picture displayed on the TV screen. ●16:9 Standard ●Custom ●4:3 [Do not watch your TV in 4:3 mode for extended periods of time. This can cause the black bars, which appear at the top, bottom, left, and right sides of the screen in 4:3 mode, to "burn in" and appear as temporary or permanent after images on the screen. If the TV is used for commercial or non-normal consumer use, then damage to the screen caused by screen "burn in" is not covered by your Warranty. "Supported picture sizes differ with the input signal. For more information about supported picture sizes, refer to "Picture sizes and input signals." Fitting the picture to the screen Settings Picture Picture Size Settings Fit to Screen "The availability of this function depends on the Picture Size. "The availability of this function depends on broadcasting signals. Adjusting the picture size and/or position Settings Picture Picture Size Settings Zoom and Position "This function is available only if Picture Size is set to Custom. "To change the picture position on analog channels, first enlarge the picture and then change the position.
- 69 - Adjusting the Sound Quality Change the Sound Mode and adjust Expert Settings. Choosing a sound mode Settings Sound Sound Mode Try Now You can select a favorite sound mode suitable for the content type or the listening environment. ●Standard ●Optimized ●Amplify Configuring advanced sound settings Settings Sound Expert Settings Try Now You can personalize the sound quality by adjusting the following settings. ●Balance ●Equalizer ●HDMI Input Audio Format ●Digital Output Audio Format "If you use a receiver that does not support Dolby Digital Plus, you will hear no sound if you select Dolby Digital+. "The Dolby Digital+ option is only available via ARC(HDMI) for external devices that support the format. ●Audio Delay ●Sound Feedback ●Reset Sound
- 70 - Using the Sound Support Functions Configure the sound settings for your TV. Selecting speakers Settings Sound Sound Output Try Now You can select which speakers the TV uses for audio output. "External speakers may not be controlled with the Samsung Smart Remote. When an external speaker is enabled, some sound menus are not supported. Listening to the TV through Bluetooth devices Settings Sound Sound Output Speaker List You can connect Bluetooth audio devices to the TV. They must be paired using the TV's Bluetooth function. For more information on pairing, refer to the Bluetooth audio device's operating manual. "This function is not available on certain models in specific geographical areas. "If the TV fails to find a Bluetooth audio device, place the device closer to the TV, and then select Refresh. "When you turn on a paired Bluetooth audio device, the TV detects it automatically, and then displays a pop-up window. Use this pop-up window to activate/deactivate the Bluetooth audio device. "The sound quality may be affected by the condition of the Bluetooth connection. "Before using a Bluetooth audio device, refer to “Read Before Using Bluetooth Devices."
- 71 - Listening to the TV through a Multiroom speaker For more information about connection and usage, refer to the user manual of the multiroom audio device. "This function is not available on certain models in specific geographical areas. Using the surround effect function and Multiroom speakers to create a surround sound configuration Settings Sound Wi-Fi Speaker Surround Setup Try Now If you've connected one or more multiroom speakers to the TV, you can create an optimal sound set up by configuring the surround effect settings. You can select any of the Multiroom speaker configurations, with or without a sound bar. After you have configured the surround effect, you can hear the TV's audio through the Multiroom speaker(s). "The Surround Setup function is only available when at least one Samsung Multiroom Link compatible speaker is connected to the TV. "The Multiroom Link function is deactivated when you activate Smart View (Screen Mirroring). "The audio from the secondary device(s) may lag behind the audio and video of the main device that is playing the source content.
- 72 - System and Support You can configure system and support settings such as time, screen burn protection, software update, etc. Setting the Time and Using the Timer Set the current time and use the timer function. Setting the current time Settings General System Manager Time You can set the Clock manually or automatically. Once the Clock is set, you can view the current time on the TV anytime. You must set the clock in the following cases: ●The power cable is disconnected and then connected. ●The Clock Mode is changed from Manual to Auto. ●The TV is not connected to the Internet. ●No broadcast signals are received. Setting the clock automatically Settings General System Manager Time Clock Clock Mode Auto "This function works only when the TV is connected to the Internet or is receiving digital broadcasts through an antenna connected. "Depending on the broadcast signal, the displayed time may differ. "The accuracy of the time information received may differ with the channel and signal.
- 73 - Adjusting the clock for DST and time zone Settings General System Manager Time Clock Sets the right time by setting Daylight Savings Time (DST) and your local time zone. "This function is only available when the Clock Mode is set to Auto. ●Time Zone Selects your time zone. ●DST Switches the Daylight Saving Time (DST) function on or off. "This function is only available when the Clock Mode is set to Auto. Changing the current time Settings General System Manager Time Clock Time Offset "Time Offset adjusts the time through a network connection. This function is only available if Clock Mode is set to Auto and the TV is connected to the Internet though a local area network. "Time Offset adjusts the time if the TV fails to receive time information through normal digital broadcast signals. Setting the clock manually Settings General System Manager Time Clock Clock Mode Manual When Clock Mode is set to Manual, you can directly enter the current time. Select the date and time by using the directional buttons on the remote control. Using the timers Using the sleep timer Settings General System Manager Time Sleep Timer You can use this function to automatically shut off the TV after a pre-set period of time. You can set the sleep timer to up to 180 minutes to automatically turn off the TV. Turning off the TV using the off timer Settings General System Manager Time Off Timer You can set Off Timer to shut off the TV automatically at a specific time. Off Timer is only available if the Clock has been set.
- 74 - Using the Screen Burn Protection and Energy Saving Functions Protect the screen from screen burn-in and reduce the TV's energy consumption. Preventing screen burn Settings General System Manager Auto Protection Time Still images can leave burned-in after-images if left on the screen for a long period of time. If a still image continues for two hours, the screen burn protection function can be activated automatically to protect the screen from burned- in after-images. Reducing the energy consumption of the TV Settings General Eco Solution Try Now You can adjust the brightness level of the TV, reduce overall power consumption, and prevent overheating. ●Ambient Light Detection Automatically adjusts the brightness level of the TV, according to the ambient light level, to reduce power consumption. If the Ambient Light Detection has adjusted the screen brightness to a too bright or dark level, you can select Minimum Backlight to manually adjust the minimum screen brightness. ●Minimum Backlight When the Ambient Light Detection is turned on, you can manually adjust the minimum brightness of the TV screen to consider the brightness level of the surroundings. This function acts only when the value is less than the setting in Settings Picture Expert Settings Backlight. ●Power Saving Mode Allows you to select a brightness setting from the list to reduce the TV's power consumption. ●Motion Lighting Adjusts the brightness in response to on-screen movements to reduce power consumption. ●Auto Power Off Automatically turns off the TV to reduce unnecessary power consumption if there is no operation for 4 hours.
- 75 - Updating the TV’s Software View your TV's software version and update it if necessary. Settings Support Software Update Try Now Updating the TV’s software to the latest version [DO NOT turn off the TV’s power until the update is complete. The TV will turn off and on automatically after completing the software update. Video and audio settings will be reset to their defaults after a software update. Updating through the Internet Settings Support Software Update Update Now "Updating from the Internet requires an active Internet connection. Updating through a USB device Settings Support Software Update Update Now After downloading the update file from the Samsung website and storing it on a USB device, connect the USB device to the TV to update. "To update using a USB flash drive, download the update package from Samsung.com to your computer. Then, save the update package in the USB device's top-level folder. Otherwise, the TV will not be able to locate the update package. Updating the TV automatically Settings Support Software Update Auto Update If the TV is connected to the Internet, you can have the TV update its software automatically while you are watching the TV. When the background update is completed, it is applied the next time the TV is turned on. If you agree to the Smart Hub terms and conditions, Auto Update is set to On automatically. If you want this function disabled, use the Select button to turn it off. "This function may take a longer time if another network function is running concurrently. "This function requires an Internet connection.