samsung un55es7500f User Manual
Have a look at the manual samsung un55es7500f User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Blaster When you connect an IR Blaster with your TV, you can control connected external devices with your TV using the Smart Touch Control. IR Blaster Pairing1. When you turn the IR Blaster on, the LED blinks. 2. Briefly point the IR Blaster toward the IR sensor of the TV and press the PAIRING button at the bottom. 3. The connection icons appear on the bottom left of the screen, and the TV
connects to IR Blaster automatically. NIf the connection process failed, please turn off and on the IR Blaster, try again from step 2. NTo set a Universal Remote Control after pairing an IR Blaster, select Ye s . Precautions for Using an IR Blaster NTo use an IR Blaster, the IR Blaster must be located nearby with external devices connected to the TV. NNote that it should be no obstacle
between the external device's IR receiver and an IR Blaster. NInstall the IR Blaster within 50 cm and 45 degrees of the up, down, left and right directions of the IR sensor of the external device. NIf you control an external device by using the Smart Touch Control, the IR Blaster sends an IR signal into a corresponding external device. Setting up Universal Remote Control
Lets you control a Set-Top Box (STB) or a BD player or both connected to the TV using your Smart Touch Control. After you connect the device to the TV, the Smart Touch Control can control the navigation, number, and other keys needed to operate and control the device. NThe Universal Remote Control can adjust TV's volume, but STB's volume cannot be adjusted. Watch
STB after adjusting STB's volume to appropriate level. NDepending on the version of an application, the Universal Remote Setup instructions may differ. In this case, please follow the instructions on the screen. To connect the external device to your Smart Touch Control, follow these steps: 1. Select Add a device to control, and
then press the touch pad. 2. Select an external device from the connected devices, and then press the touch pad. 3. Select the port used to connect the external device, and then press the touch pad. NMake sure that the selected device is on. If it is turned off, turn the power on and press Refresh . 4. Select Search Brands, and then press
the Touch Pad. A keyboard and an entry field appear. Enter the first few letters of the brand name of your device using the Smart Touch Control, and then select Done at the bottom of the keyboard. In the list that appears below the entry field, select the brand name of your device, and then press the touch pad. NIf you want to search the brand of STB (Set-Top box), you can
search the STB by using the brand name or a cable provider. 5. Select Search Model, and then press the touch pad. A keyboard and an entry field appear. Enter the first few letters and numbers of the model name of your device using the Smart Touch Control, and then select Done at the bottom of the keyboard. In the list that appears below the entry field, select the model name of your
device, and then press the touch pad. NIf the search for model name does not work properly, search with a part of the model name or use the search for recommended model code. 6. Select Download , and then press the touch pad. Download the configuration data for the IR Blaster in the same way. 7. When all the settings are complete,
select the Complete button and press the touch pad. NTo reset IR Blaster and Smart Touch Control, press the ‹ button on Smart Touch Control, and then select Set Up Universal Remote. Using the Search for Recommended Model Code 1. In the Search Model step in the integrated remote control setup, select the Recommended and press