Samsung UE 46C7000 User Manual

							31English
04 Adva\fced	 Features
Network	Setup	(Samsu\fg	Auto	
Co\ffiguratio\f)
This \function is av\yailable in APs (Ac\ycess Points) that \ysupport 
Samsung Auto Configu\yration\b I\f your AP d\yoes not, you can 
connect through PBC
	 (WPS), auto, or manuall\yy\b
 ✎This \function is available when SWL(Samsu\fg	Wire\bess 	 Li\fk) is set to Off \b
 ✎You can check \for equipment that supports Samsung 
Auto Con\figuration on www\bsamsung\bcom\b
How
	 to 	 set 	 up 	 usi\fg 	 Samsu\fg 	 Auto 	 Co\ffiguratio\f
1.	 Place the AP and TV\y next to each othe\yr and turn them 
on\b
 ✎Because the booting times o\f applications di\f\fer, 
you may have to wait \for approximately 2 minutes\b
 ✎I\f the L AN cable connected the WAN port o\f AP 
during Samsung Auto Con\figuration, you are able 
to complete until internet connection test\b I\f you 
do not connect, Samsung Auto Con\figuration will 
check only device connecting o\f AP (Not check 
internet)\b
2.	 A\fter 2 minutes, co\ynnect the Samsung W\yireless LAN 
Adapter to the TV\b When the Samsung \yWireless LAN 
Adapter is establis\yhed, the pop-up win\ydow appears\b
3.	 As soon as a conne\yction is establish\yed, place the AP in\y 
parallel with the \ySamsung Wireless LAN Adapter g\yiving a 
gap no larger than\y 25cm\b
4.	Wait until the conn\yection is automati\ycally established\b 
 ✎I\f Samsung Auto Con\figuration does not connect 
your T V to your AP, a pop-up window appears 
on the screen noti\fying you o\f the \failure\b Reset 
the AP, and then try again\b I\f the connection \fails 
again, choose one o\f the other connection setup 
methods, PBC (WPS), auto, or manual\b
5.	 A\fter the connectio\yn is established, l\yocate the sharer at 
the desired location\b
 ✎I\f the AP settings have been changed or it is the 
\first time you use the new AP a\fter purchase, you 
need to set up again beginning \from Step 1\b
Network	Setup	(PBC	(WPS))
How	to	set	up	usi\fg	PBC	(WPS)
I\f your r outer has a PBC (W\yPS) button, \follow \ythese steps:
1.	 Connect your TV to \yyour LAN as describ\yed in the 
previous section\b
2.	 Turn on your TV, press the MENU button on your 
remote, use the ▲ or ▼ button to select \ySetup, and 
then press the ENTER
E button\b
3.	 Use the ▲ or ▼ button to select \yNetwork in the Setup 
menu, and then press the ENTER
E button\b
4.	 On the Network screen, select Network
	 Type\b
5.	 Set Network
	
Type to Wire\bess\b
6.	 Select Network
	
Setup\b The Network 	 Setup screen 
appears\b
Notice
The picture may appear corrup\yted or have static \y\for some channels w\yhen the TV is conn\yected to the Samsun\yg Wireless LAN 
Adapter\b In such a case, e\ystablish a connect\yion using one o\f th\ye \following methods\y or connect the Sam\ysung Wireless LAN 
Adapter using a USB\y cable in a place \ythat is not a\f\fected by radio inte\yr\ference\b
Method	1 Method 	 2
Connect using the \yUSB right angle ada\ypter Connect via an ext\yension cable
 ✎The Samsung Wireless L AN Adapter should 
be installed in an inter\ference-\free area in 
order to avoid inter\ference between the 
adapter and tuner\b
or
[UC7000]BN68-02590D-Eng.indb   312010-05-17   오후 3:45:49 
						

							32English
Ad\fanced Features
7.	Press the Red button \yon your remote\b
8.	 Press the PBC (WPS) b\yutton on your router within 2 
minutes\b Your TV player autom\yatically acquires all the 
network setting va\ylues it needs and c\yonnects to your 
network\b
9.	 A\fter the network c\yonnection is set u\yp, press the 
RETURN button to exit th\ye Network
	 Setup screen\b
Network	Setup	(Auto)
Most wireless networks hav\ye an optional secu\yrity system 
that requires devices that acc\yess the network to\y transmit 
an encrypted securi\yty code called an Ac\ycess or Security 
Key\b The Security Ke\yy is based on a Pas\ys Phrase, typically\y 
a word or a series o\f le\ytters and numbers o\y\f a specified 
length you were asked to enter wh\yen you set up secur\yity \for 
your wireless network\b  I\f \yyou use this method\y o\f setting up 
the network connec\ytion, and have a Se\ycurity Key \for your \y
wireless network, you \ywill have to enter\y the Pass Phrase 
during the setup pr\yocess\b
How
	 to 	 set 	 up 	 automatica\b\by
To set up the wireless connection a\yutomatically, \follo\yw these 
steps:
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 31)\b
2.	 Press the ▼ button to select \yI\fter\fet
	 Protoco\b 	 Setup, 
and then press the ENTER
E button\b Press the ▲ or 
▼ button to select \yAuto, and then press the ENTERE 
button\b
3.	 Press the ▲ button to go to Se\bect
	
a
	
Network, and 
then press the ENTER
E button\b The Network \function 
searches \for available \ywireless networks\b Whe\yn done, it 
displays a list o\f t\yhe available netwo\yrks\b
4.	 In the list o\f netw\yorks, press the ▲ or ▼ button to select \y
a network, and then\y press the ENTER
E button\b
 ✎I\f the AP is set to Hidden (Invisible), you have 
to select Add
	 Network and enter the correct 
Network
	 Name 	 (SSID) and Security 	 Key to 
establish the connection\b 5.	
I\f the Security/PIN \ypop-up appears, go\y to Step 6\b I\f the 
Network Connecting\y Screen appears, go to\y Step 10\b
6.	 Press the ▲ or ▼ button to select \ySecurity or PIN\b For 
most home networks\y, you would select \ySecurity (\for 
Security 	 Key)\b The Security Screen appears\b
7.	 On the Security screen, enter your net\ywork’s Pass 
Phrase\b 
 ✎You should be able to \find the Pass Phrase on 
one o\f the set up screens you used to set up your 
router or modem\b
8.	 To enter the Pass P\yhrase, \follow these\y general 
directions:
 – Pr

ess the number but\ytons on your remote to enter 
numbers\b
 – Use the dir

ection buttons on \yyour remote to move 
\from button to butto\yn on the Security
	 Key screen\b
 – Pr

ess the Red button \yto change case or \ydisplay 
symbols/characters\b\y
 – T

o a enter letter o\yr symbol, move to t\yhe letter or 
symbol, and then pr\yess the ENTER
E button\b
 – T

o delete the last l\yetter or number you\y entered, press 
the Green button on your \yremote\b
9.	 When done, press the Blue butto\yn on your remote\b The 
Network Connecting\y screen appears\b
10.	 Wait until the conn\yection confirmation\y message is 
displayed, and then \ypress the ENTER
E button\b The 
Network
	
Setup screen re-appears\b
11.	 To test the connect\yion, press the RETURN button to 
select Network
	
Test, and then press the ENTER
E 
button\b
ABCDEFG
HIJKLMN
OPQRS\fU
VW\bYZ
0~9
Network Setup
n Move    E Enter    R Return
Security Key
0 enteredNumber
 
 Lower case
 
B Delete
 
 Space
Network Setup
 PBC(WPS)    U Move    E Enter    R Return
Select a Network  : Not Selected  ►
Internet Protocol Setup  
 : 
 Auto  
IP

 Address  
 :       
Subnet Mask  :       
Gateway  :       
DNS  :  Auto
DNS Server  
 :       
[UC7000]BN68-02590D-Eng.indb   322010-05-17   오후 3:45:49 
						

							33English
04 Adva\fced	 FeaturesNetwork	Setup	(Ad-Hoc)
You can connect to \ya mobile device wit\yhout an access poi\ynt 
through the “Samsung W\yireless LAN Adapter” \yby using a 
peer to peer netwo\yrk\b
 ✎This \function is available when SWL(Samsu\fg	W
ire\bess 	 Li\fk) is set to Off \b
How
	 to 	 co\f\fect 	 to 	 \few 	 Ad-hoc 	 device
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 31)\b \y
2.	 Choose Se\bect
	 a 	 \fetwork\b A list o\f devices/\ynetworks 
appears\b 
3.	 While in the device\y list, press the Blue butto\yn on the 
remote\b
 ✎The message Ad-hoc	is	a	direct	Wi-Fi	c
o\f\fectio\f 	 with 	 ce\b\b 	 pho\fe 	 or 	 PC. 	 The 	 existi\fg 	
\f

etwork 	 system 	 may 	 have 	 \bimited 	 fu\fctio\fa\bity. 	
D

o 	 you 	 wa\ft 	 to 	 cha\fge 	 the 	 \fetwork 	
c

o\f\fectio\f? 	 is 	 disp\bayed. is displayed\b
4.	 Input the generate\yd Network
	 Name 	 (SSID) and 
Security
	 Key into the device yo\yu want to connect\b
How
	
to
	
co\f\fect 	 a\f 	 existi\fg 	 Ad-hoc 	 device
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 31)\b \y
2.	 Choose Se\bect
	 a 	 \fetwork\b The Device/Networ\yk list 
appears\b 
3.	 Select the device yo\yu want in the Devi\yce list\b 
4.	 I\f security key is r\yequired, input the secur\yity key\b
 ✎I\f network doesn’t operate normally, check 
the Network
	 Name 	 (SSID) and Security 	 Key 
again\b An incorrect Security
	 Key may cause a 
mal\function\b
Network	Setup	(Ma\fua\b)
I\f the other method\ys do not work, you \yneed to enter the 
Network setting va\ylues manually\b
Getti\fg
	 the 	 Network 	 Co\f\fectio\f 	 Va\bues
To get the Network \yconnection values \yon most Windows 
computers, \follow t\yhese steps:
1.	 Right click the Ne\ytwork icon on the \ybottom right o\f the\y 
screen\b
2.	 In the pop-up menu\y, click Status\b
3.	 On the dialog that \yappears, click the\y Support tab\b
4.	 On the Support tab,\y click the Details\y button\b The 
Network settings a\yre displayed\b
How
	 to 	 set 	 up 	 ma\fua\b\by
To enter the Networ\yk connection value\ys manually, \follow \y
these steps:
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 31)\b
2.	 Press the ▼ button to select \yI\fter\fet
	 Protoco\b 	 Setup, 
and then press the ENTER
E button\b Press the ▲ 
or ▼ button to select \yMa\fua\b, and then press the 
ENTER
E button\b
3.	 Press the ▼ button to go to t\yhe first entry field \y(IP 
Address)\b
4.	 Use the number but\ytons to enter numb\yers\b
5.	 When done with each\y field, use the ► button to move 
successively to the\y next field\b You can also use th\ye other 
arrow buttons to move\y up, down, and back\y\b
6.	 Enter the IP
	 Address, Sub\fet 	 Mask, and Gateway 
values\b
7.	 Press the ▲ or ▼ button to go to DNS\b
8.	 Press the ▼ button to go to t\yhe first DNS entry fi\yeld\b 
Enter the numbers a\ys above\b
9.	 When done, press the ▲ button to go to Se\bect
	 a 	
Network

\b Select your networ\yk, and then press the 
ENTER
E button\b
10.	 Go to Step 4 in the\y “How to set up au\ytomatically” (p\b 
32), and \follow the\y directions \from that point on\b
[UC7000]BN68-02590D-Eng.indb   332010-05-17   오후 3:45:50 
						

							34English
Ad\fanced Features
SWL(Samsu\fg	Wire\bess	Li\fk)
This \function lets \yyou connect a Samsu\yng device that 
supports the PBC (\yWPS) to your TV\b You can connect 
devices to the TV e\yven i\f a sharer is not connecte\yd to the TV\b
 ✎To use the Internet@T V, the AP (access point) must be 
connected to the wireless network\b
 ✎I\f a Samsung Wireless L AN Adapter is connected to the 
USB	 2 port, the network may not operate normally\b We 
recommend to connecting it to the USB
	 1 	 (HDD) port\b
 ✎Only sharers using the 2\b4 Ghz band are supported\b 
Sharers using the 5 Ghz band are not supported\b
SWL	co\f\fect
You can directly connect a dev\yice that supports \ythe PBC 
(WPS) to the TV\b
 ✎This \function is available when SWL(Samsu\fg	Wire\bess 	 Li\fk) is set to O\f \b
How
	 to 	 co\f\fect 	 Samsu\fg 	 Wire\bess 	 Li\fk
For the procedures to establish a \yconnection, re\fer to the 
\following:
1.	 Follow Steps 1 through 5 in the “How\y to set up using 
PBC (WPS)” (p\b 31)\b
2.	 Select SWL(Samsu\fg
	 Wire\bess 	 Li\fk) by using the ▼ 
button and press the ENTER
E button to turn it On\b
3.	 Select SWL
	
co\f\fect by using the ▼ button and press 
the ENTER
E button\b
4.	 I\f the “Press
	
the 	 PBC 	 butto\f 	 o\f 	 the 	 PBC(WPS) 	
supported

	
device 	 to 	 co\f\fect 	 withi\f 	 120 	 seco\fds.” 
message appears, p\yress the PBC button\y on the device 
to connect\b
 ✎For more in\formation, re\fer to the wireless network 
setup manual o\f the device to be connected\b 
5.	 I\f the device is co\ynnected properly to the TV a\f\yter 
starting count on \ymessage box then m\yessage box will 
be disappeared automatically\b
 ✎I\f the connection \fails, please retry a\fter 2 minutes\b
If	Your	TV	Fai\bs	to	Co\f\fect	to	the	I\fter\fet
Y our TV may not be a\yble to connect to \ythe Internet 
because your ISP ha\ys permanently registered the 
MAC address (a unique ident\yi\fying number) o\f yo\yur 
PC or modem, which \yit then authentica\ytes each time 
you connect to the \yInternet as a way o\f preventing 
unauthorized access\y\b As your TV has a \ydi\f\ferent MAC 
address, your ISP can n\yot authenticate it\ys MAC address, 
and your TV can not\y connect\b
To resolve this problem, ask your ISP\y about the 
procedures required to connect devic\yes other than a PC\y 
(such as your TV) t\yo the Internet\b
I\f your Internet service provider requires an ID or passwo\yrd 
to connect to the \yInternet, your TV may no\yt be able to 
connect to the Int\yernet\b I\f this is the\y case, you must ent\yer 
your ID or password when connecting t\yo the Internet\b
The internet connection may \y\fail because o\f a fi\yrewall 
problem\b I\f this is t\yhe case, contact yo\yur Internet service 
provider\b 
I\f you cannot conne\yct to the Internet even a\fter you \yhave 
\followed the procedures o\f your Internet service provider, 
please contact Samsung Electronics at 1-800-SAMSUNG\b
[UC7000]BN68-02590D-Eng.indb   342010-05-17   오후 3:45:50 
						

							35 English 
04 	Adva\fced	Features	  Me\bia Play  
	
¦ 		Co\f\fecti\fg	a	USB	Devi\Tce		
		1.	 Turn on your TV\b 
	2.	 Connect a USB devic\ye containing recorded tv, photo, musi\yc and/or movie fi les to 
the  USB	1	(HDD)  or   USB	2  jack on the side o\y\f the TV\b 
	3.	 When USB is connect\yed to the TV, popup window appe\yars\b Then you can s\yelect 
  Media	P\bay \b  
	
¦ 		Co\f\fecti\fg	to	the	PC	\Tthrough	\fetwork		
  You can play pictures, music and video\ys saved on your PC \ythrough a network con\ynection in the   Media	P\bay  mode\b   
 
✎  I\f you use   Media	P\bay  through saved \file on your PC, you should download “PC Share Manager” and users manual \from 
“www\bsamsung\bcom\b”  
		1.	 For more in\formation on ho\yw to confi gure your network, re\fer to “Network Co\ynnection” (p\b 28)  \b
 –   You are recommended to locat\ye both TV and PC in\y same subnet\b The fi\y rst 3 parts o\f the \ysubnet address o\f the TV and  the PC IP addresses should be the\y same and only the \ylast part (the hos\yt address) should be chan\yged\b (e\bg\b IP Address: 
123\b456\b789\b**)  
		2.	 Using a LAN cable,\y connect between t\yhe external modem and the P\yC onto which the Sa\ymsung PC Share Manager 
programme will be in\ystalled\b  
 –   You can connect the\y TV to the PC directly without conne\ycting it through a Sharer (Router)\b  
Enjoy recorded tv, photos, mus\yic and/or movie 
fi les saved on a USB \yMass Storage Class \y(MSC) 
device and/or your P\yC\b
LAN Cable
 PC 
 External Modem 
 (ADSL/VDSL/Cable TV\y) 
LAN
 Samsung 
Wireless LAN  Adapter 
 Wireless IP sharer   TV Rear Panel 
or
 LAN 
adapter 
 LAN Cable   Modem Cable 
 LAN Cable   LAN Cable  USB Drive
TV Rear Panel
or
MEDIA.P
SUM      Change Device  
   Device Mode      E   Enter      R   Return  
  Recorded TV  
[UC7000]BN68-02590D-Eng.indb   352010-05-17   오후 3:45:53 
						

							36English
Ad\fanced Features
 ✎No supported \functions when connecting to the PC through network:
 xThe Backgrou\fd	Music and Backgrou\fd	Music	Setti\fg \functions\b
 xSorting \files by pre\ference in the Photos, Music, and Videos \folders\b
 xThe � (REW) or µ (FF) button while a movie is playing\b
 ✎The Divx DRM, Multi-audio, embedded caption does not supported\b
 ✎Samsung PC Share manager should be permitted by the \firewall programme on your PC\b
 ✎When you use Media	P\bay mode through a network connection, According to \functions o\f the provided server:
 xThe sorting method may vary\b
 xThe scene search \function may not be supported\b
 xThe P\bay	Co\fti\fuous\by \function, which resumes playing o\f a video, may not be supported\b
 – The 

P\bay 	 Co\fti\fuous\by \function does not \ysupport multiple u\ysers\b (It will have\y only memorised the\y point where the 
most recent user stopped \yplaying\b)
 xThe ◄ or ► button may not work depending on the content in\formation\b
 – Y

ou may experience fi\yle stuttering whil\ye playing a video i\yn Media Play through a network con\ynection\b
 ✎It might not work properly with unlicenced multimedia \files\b
 ✎Need-to-Know List be\fore using Media	P\bay
 xMTP (Media Trans\fer Protocol) is not supported\b
 xThe \file system supports FAT16, FAT32 and NTFS\b
 xCertain types o\f USB Digital camera and audio devices may not be compatible with this T V\b
 xMedia Play only supports USB Mass Storage Class (MSC) devices\b MSC is a Mass Storage Class Bulk-Only 
Transport device\b Examples o\f MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not 
supported)\b Devices should be connected directly to the T V’s USB port\b 
 xBe\fore connecting your device to the T V, please back up your \files to prevent them \from damage or loss o\f data\b 
SAMSUNG is not responsible \for any data \file damage or data loss\b
 xConnect a USB HDD to the dedicated port, USB	1	(HDD) port\b
 xDo not disconnect the USB device while it is loading\b
 xThe higher the resolution o\f the image, the longer it takes to display on the screen\b
 xThe maximum supported JPEG resolution is 15360X8640 pixels\b
 xFor unsupported or corrupted \files, the “Not Supported File Format” message is displayed\b
 xI\f the \files are sorted by Basic View, up to 1000 \files can be displayed in each \folder\b
 xMP3 \files with DRM that have been downloaded \from a non-\free site cannot be played\b Digital Rights Management 
(DRM) is a technology that supports the creation o\f content, the distribution and management o\f the content in an 
integrated and comprehensive way, including the protection o\f the rights and interests o\f the content providers, the 
prevention o\f the illegal copying o\f contents, as well as managing billings and settlements\b
 xI\f more than 2 PTP devices are connected, you can only use one at a time\b
 xI\f more than two MSC devices are connected, some o\f them may not be recognized\b A USB device that requires high 
power (more than 500mA or 5V) may not be supported\b
 xI\f an over-power warning message is displayed while you are connecting or using a USB device, the device may not 
be recognized or may mal\function\b
 xI\f the T V has been no input during time set in Auto	Protectio\f	Time , t he Screensaver will run\b
 xThe power-saving mode o\f some external hard disk drives may be released automatically when connected to the T V\b
 xI\f a USB extension cable is used, the USB device may not be recognized or the \files on the device may not be read\b
 xI\f a USB device connected to the T V is not recognized, the list o\f \files on the device is corrupted or a \file in the list is 
not played, connect the USB device to the PC, \format the device and check the connection\b
 xI\f a \file deleted \from the PC is still \found when Media Play is run, use the “Empty the Recycle Bin” \function on the PC 
to permanently delete the \file\b
[UC7000]BN68-02590D-Eng.indb   362010-05-17   오후 3:45:53 
						

							37English
04 Adva\fced	 Features	¦Scree\f 	 Disp\bay
Move to the file you\y desired using the up/dow\yn/right/le\ft button\ys and then press the ENTERE or � (Play) button\b The\y file is 
played\b
 ✎Supports the View	Devices and Home in Media	P\bay homepage\b
 
Recorded	TV
To use the recording or Timeshi\ft Mode \functi\yon, the connected U\ySB device must be a\yvailable \for recording\b Device	format is 
r ecommended to use U\ySB HDD\b
 ✎During the Device \formatting, do not disconnect the device while \formatting is in progress\b I\f you \format the device, all 
\files will be deleted\b
 ✎Be\fore \formatting your device to the tv, please back up your \files to prevent them \from damage or loss o\f data\b 
SAMSUNG is not responsible \for any data \file damage or data loss\b
P\bayi\fg
	 Recorded 	 TV 	 Programme
1.	Press the ◄ or ► button to select \yRecorded 	 TV, then press 
the ENTERE button in the Media	P\bay menu\b
2.	 Pr
ess the ◄/►/▲/▼ button to select \ythe desired file in the file 
list\b
3.	 Press the ENTER
E button or � (Play) button\b
 – The selected file is\y displayed on the to\yp with its playing \y
time\b
 – During playing the \yr

ecorded TV programme, you can se\yarch 
using the ◄ and ► button\b
Operatio\f
	
Butto\fs
B Green ( Sectio\f	R epeat): You can set up the \fuction to repeat some section\b 
You can also watch some section you want to\b
Movie 01.avi 00:04:03 / 00:07:3\
8
1/1
SUMB Section Repeat   Play continuously E Chaptering L Jump T Tools 
Resumes playing from the last viewed 
scene. Play continuously
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi
1/1
Movie 01.avi
SUM Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 0\f.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Select   Sorting  T Tools
In\formation:
You can ascertain the selected 
file name and the number o\f files  and page\b
Sort List Section:
Displays sorting standard\b
 ✎Sorting standard is 
di\f\ferent depending on the 
contents\b
Operation Buttons
 Red (Cha\fge	D evice): Selects a connected device\bB Green ( Prefere\fce ): Sets the file pre\ference\b (not supported in Basic view) Yellow (Se\bect): Selects multiple files \from file list\b Selected files are marked with a symbol\b Blue (Sorti\fg ): Selects the sort list\bT Too\bs : Displays the option menu\b
 ✎Using the � (REW) or µ (FF) button, file list can move to next or previous page\b
File List Section:
You can confirm the files 
and groups that is sorted by 
each category\b
VideosPage
 
 Change Device
[UC7000]BN68-02590D-Eng.indb   372010-05-17   오후 3:45:55 
						

							38English
Ad\fanced Features
Usi\fg	the	Timeshift	Mode	fu\fctio\f	t	
I\f you missed a live\y br

oadcast, you can se\ye \from the recorded broadcast using this \y\feature\b
When the Timeshift
	
Mode is set to Auto, the TV stores the channel you \ywatch currently to record automatically\b
When the Timeshift
	
Mode is set to Ma\fua\b, i\f you press the 
� (Play) button, the\y TV stores the channel \from the point o\f 
view you want to record\b
 ✎NOTE
 xRecorded videos are DRM (digital rights management) protected and cannot be played on a PC or other T Vs, nor can 
they be played when the main board o\f the T V is changed\b
 xData broadcasts cannot be recorded\b
 xThe availability o\f both recording and the Timeshift	Mode \function may di\f\fer depending on picture quality and the 
\f ree space on the hard disk drive\b
 xI\f you press the ▲ or ▼ button, you can see the current channel being on air, or can see the start point the recorded 
broadcast\b
 xThe Timeshift	Mode operates \for a maximum o\f 90 minutes\b
 xA\fter the Timeshift	Mode \function has run \for the maximum time, the time in\formation will be \fixed to “00:00:00\b” 
N ote that i\f you have paused the recording the T V will automatically resume playback\b
 xI\f the 5% \free memory space limit o\f the USB storage device is reached, the current recording process will be closed\b
 xWhen recording is per\formed by both the PVR (Personal Video Recorder) \function and a device that supports the 
HDMI-CEC \feature, recording by the PVR \function takes precedence\b
 xDuring a playback or the Timeshift	Mode , t he picture will be displayed according to the display settings o\f the T V\b
 xI\f you change the input source during recording, the screen will go blank until the change is completed\b
 xAn application which supports neither the recording nor the Timeshift	Mode \function will close automatically i\f you 
t ry to use it during either \function\b
 xA message may appear in \front o\f the application window indicating that the recording or the Timeshift	Mode 
\f unction is closed\b
 xTimeshift	Mode \function is not supported \for analogue channels\b
 xThe recording and the Timeshift	Mode \functions are disabled \for channels locked with Chi\bd	Lock \b
 xI\f the USB device has \failed the Device	Performa\fce	Test, t he USB device must go through the Device 	 Format and 
Device 	 Performa\fce 	 Test again be\fore you record with the Guide or Cha\f\fe\b 	 Ma\fager\b
 xThe recording and Timeshif	Modet \functions can only be used with a USB storage device that completed the 
D evice 	 Performa\fce 	 Test\b
 xI\f you attempt the recording or Timeshift	Mode \function with a device that did not have the Device	Performa\fce	T
est , the \function will not start\b
 xI\f you press � (REC) on the remote control while the Cha\f\fe\b	Ma\fager screen is being displayed or record with 
T imer 	 Recordi\fg , the T V may start or stop recording 1 or 2 seconds later than you intended due to the time needed 
to process the command\b
 xI\f a USB device dedicated to recording is connected, existing Timeshift	Mode or recording \files that were saved 
a bnormally will automatically be deleted\b
 xI\f you switch to external input mode during recording, the recording will continue but the � (REC) button will be 
disabled\b
 xI\f any \function that turns o\f\f the T V ( S\beep 	 Timer, O\f\f timer, etc\b) is set \for a time that con\flicts with recording, the T V 
will be turned o\f\f once the recording is complete\b
[UC7000]BN68-02590D-Eng.indb   382010-05-17   오후 3:45:55 
						

							39English
04 Adva\fced	 FeaturesVideos
P\bayi\fg	Video
1.	 Pr
ess the ◄ or ► button to select \yVideos, then press the ENTER
E button in the Media	P\bay menu\b
2.	 Pr
ess the ◄/►/▲/▼ button to select \ythe desired file in the file l\yist\b
3.	 Press the ENTER
E button or � (Play) button\b
 – The selected file is\y displayed on the to\yp with its playing \ytime\b
 – I\f video time in\form\yation is unknown, \yplay time and pr

ogress bar are not displayed\b
 – During playing the \yvideo, you can sear\y

ch using the ◄ and ► button\b
 ✎In this mode, you can enjoy movie clips contained on a Game, 
but you cannot play the Game itsel\f\b 
 ySupported Subtitle F\yormats
Name Fi\be 	 exte\fsio\fFormat
MPEG-4 time-based te\yxt \bttxtXML
SAMI \bsmiHTML
SubRip \bsrtstring-based
SubViewer \bsubstring-based
Micro DVD \bsub or \btxtstring-based
 ySupported V ideo Formats
Fi\be	Exte\fsio\f Co\ftai\fer V ideo 	 CodecReso\butio\fFrame 	 rate 	(fps)Bit
	 rate 	(Mbps)Audio
	 Codec
*\bavi
*\bmkv AVI 
MKV Divx 3\b11 / 4\bx / 5\y\b1 / 6\b0 1920x1080 6 ~ 30 8
MP3 / AC3 / LPCM /\y ADPCM / DTS Core
XviD
1920x1080 6 ~ 30 8
H\b264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Motion JPEG 800x600 6 ~ 30 8
*\bas\f ASFDivx 3\b11 / 4\bx / 5\y\b1 / 6\b0 1920x1080 6 ~ 30 8
MP3 / AC3 / LPCM /\y ADPCM / WMA
XviD
1920x1080 6 ~ 30 8
H\b264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Motion JPEG 800x600 6 ~ 30 8
*\bwmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA
*\bmp4 MP4 H\b264 BP / MP / HP 1920x1080 6 ~ 30 25
 MP3 / ADPCM / AAC\y
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
XVID 1920x1080 6 ~ 30 8
*\b3gp 3GPP H\b264 BP / MP / HP 1920x1080 6 ~ 30 25
ADPCM / AAC / HE-AA\yC
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
*\bvro VRO 
VOB MPEG1 
1920x1080 24 / 25 / 30 30
AC3 / MPEG / LPCM
MPEG2 1920x1080 24 / 25 / 30 30
*\bmpg
*\bmpeg PS MPEG1
1920x1080 24 / 25 / 30 30
AC3 / MPEG / LPCM /\y AAC
MPEG2 1920x1080 24 / 25 / 30 30
H\b264 1920x1080 6 ~ 30 25
*\bts
*\btp
*\btrp TS MPEG2
1920x1080 24 / 25 / 30 30
AC3 / AAC / MP3 / \yDD+ / 
HE-AAC
H\b264
1920x1080 6 ~ 30 25
VC1 1920x1080 6 ~ 30 25
Movie 01.avi00:04:03 / 00:07:3\
8
1/1
SUME Chaptering L Jump T Tools R Return
[UC7000]BN68-02590D-Eng.indb   392010-05-17   오후 3:45:57 
						

							40English
Ad\fanced Features
Other	Restrictio\fs
 ✎NOTE
 xI\f there are problems with the contents o\f a codec, the codec will not be supported\b
 xI\f the in\formation \for a Container is incorrect and the \file is in error, the Container will not be able to play 
correctly\b
 xSound or video may not work i\f the contents have a standard bitrate/\frame rate above the compatible Frame/sec 
listed in the table above\b
 xI\f the Index Table is in error, the Seek (Jump) \function is not supported\b
Video	DecoderAudio 	 Decoder
•
 S

upports up to H\b264, Level 4\b1
•
 H

\b264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not 
supported\b
•
 X

VID, MPEG4 SP, ASP:
 – Below 1280 x 720: \y60 \frame max – Above 1280 x 720: \y30 \frame max• GMC 2 over is not supported\b
• H \b263 is not supported\b
•
 O

nly Samsung Techwin MJPEG is supported\b  •
 S

upports up to WMA 7, 8, 9, STD
•
 W
 MA 9 PRO does not support 2 channel excess multi channel or 
lossless audio\b
•
 W
 MA sampling rate 22050Hz mono is not supported\b
P\bayi\fg	recorded	TV	or	movie	fi\be	co\fti\fuous\by	(Resume	P\bay)
I\f you exit the pla\yying Recor ded TV or Videos \function, it \ycan be played later\y \from the point where it was stopped\b
 ✎I\f you press the ENTERE button (Chapteri\fg ) during playing the \file, you can explore scene divided into 5 chapters 
you want\b
 ✎I\f the index in\formation is damaged or unsupported, you will not be able to use the Chapteri\fg \function\b
1.	 Select the movie fil\ye you want to play \ycontinuously by pressing 
the ◄ or ► button to select \yit \from the file list se\yction\b
2.	 Press the 
� (Play) / ENTERE button\b
3.	 Select P\bay
	
Co\fti\fuous\by (Resume Play) by p\yressing the Blue 
button\b The Movie w\yill begin to play \f\yrom where it was stopped\b
 ✎The Blue button is available when resuming play\b
 ✎I\f the Co\ft.	movie	p\bay	he\bp \function is set to O\f in the 
S etti\fgs menu, a pop-up message will appear when you 
resume play a movie \file\b
Movie 01.avi 00:04:03 / 00:07:3\
8
1/1
SUM Play continuously    E Chaptering    L Jump    T Tools    R Return
Resumes playing from the last viewed 
scene. Play continuously
[UC7000]BN68-02590D-Eng.indb   402010-05-17   오후 3:45:58