Samsung UE 46C7000 User Manual

							11English
02 Co\f\fectio\fs
Changing the \fnput S\hource
Source	List
Use to select TV o\yr an external input 
sources such as a DVD \y/ Blu-ray player / \y
cable box / STB sat\yellite receiver\b 
 ■TV

	 / 	 Ext.1 	 / 	 Ext.2 	 / 	 PC 	 / 	 AV 	 / 	
Compo\fe\ft

	 / 	 HDMI1/DVI 	 / 	 HDMI2 	 / 	
HDMI3

	 / 	 HDMI4 	 / 	 USB
 ✎In the Source	List, c onnected 
inputs will be highlighted\b 
 ✎Ext.1 , Ext.2 and PC always stay activated\b
Edit	Name
 ■VCR 	 / 	 DVD 	 / 	 Cab\be 	 STB 	 / 	 Sate\b\bite 	 STB 	 / 	 PVR 	 STB 	 / 	A
V 	 Receiver 	 / 	 Game 	 / 	 Camcorder 	 / 	 PC 	 / 	 DVI 	 PC 	 / 	 DVI 	
Devices

	 / 	 TV 	 / 	 IPTV 	 / 	 B\bu-ray 	 / 	 HD 	 DVD 	 / 	 DMA: Name 
the device connecte\yd to the input jack\ys to make your 
input source selection easie\yr\b
 ✎When a PC with a resolution o\f 1920 x 1080 @ 
60Hz is connected to the HDMI 	 IN 	 1(DVI) 	 port, 
you should set to DVI
	 PC mode under Edit 	 Name\b
 ✎When connecting an HDMI/DVI cable to the HDMI	I
N 	 1(DVI) port, you should set to DVI 	 PC or DVI 	
D

evices mode under Edit 	 Name\b
 ✎I\f an HDMI cable is connected to the 
HDMI
	 IN 	 1(DVI) port, the audio may not work\b In 
this case, connect to the PC/DVI
	 AUDIO 	 IN port\b
CONNECTIONS	COMMON	INTERFACE	S\bot
T o watch paid channe\yls, the “CI or CI+\y CARD” must be ins\yerted\b
 y I\f you don’

t insert the “CI o\yr CI+ CARD,” some \ychannels will 
display the message\y “Scrambled Signal”\b\y
 y The pairing in\forma\ytion containing a \ytelephone number

, the “CI or 
CI+ CARD” ID the H\yost ID and other in\y\formation will be d\yisplayed 
in about 2~3 minut\yes\b I\f an error message is displ\yayed, please 
contact your servic\ye provider\b
 y When the configurat\yion o\f channel in\fo\yrmation has finishe\yd, the 
message “Updating C\yompleted” is displa\yyed, indicating the \y
channel list is up\ydated\b
 ✎NOTE
 xYou must obtain a “CI or CI+ CARD” \from a local cable service provider\b 
 xWhen removing the “CI or CI+ CARD”, care\fully pull it out with your hands since dropping the “CI or CI+ CARD” may 
cause damage to it\b
 xInsert the “CI or CI+ CARD” in the direction marked on the card\b
 xThe location o\f the COMMON	INTERFACE slot may be di\f\ferent depending on the model\b
 x“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer\b
 xI\f you have any problems, please contact a service provider\b
 xInsert the “CI or CI+ CARD” that supports the current antenna settings\b The screen will be distorted or will not be 
seen\b
SOURCE
[UC7000]BN68-02590D-Eng.indb   112010-05-17   오후 3:45:28 
						

							12English
Basic Features
How to Navigate Me\hnus
Be\fore using the TV, \follow the steps \ybelow to learn how to 
navigate the menu \yand select and adjus\yt di\f\ferent \functions\b
1	ENTERE / Direction button: Mov\ye the cursor and 
select an item\b Con\yfirm the setting\b
2	 RETURN button: Returns to the previous menu\b
3	 MENU button: Displays t\yhe main on-screen menu\b
4	 EXIT button: Exits the \yon-screen menu\b
How
	
to
	
Operate 	 the 	 OSD 	 (O\f 	 Scree\f 	 Disp\bay)
The access step ma\yy di\f\fer depending on the\y selected menu\b
1MENU mThe main menu opti\yons appear on 
the screen:
Picture, Sou\fd, Cha\f\fe\b, Setup, 
I\fput, App\bicatio\f, Support\b
2▲ / ▼ Select an icon with\y the ▲ or ▼ 
button\b
3ENTER EPress ENTERE to access the 
sub-menu\b
4▲ / ▼ Select the desired submenu with 
the ▲ or ▼ button\b
5◄ / ►Adjust the value o\f\y an item with the \y
◄ or ► button\b The adjust\yment in 
the OSD may di\f\fer depending on 
the selected menu\b
6ENTER EPress ENTERE to complete the 
configuration\b
7EXIT ePress EXIT\b
Using the INFO button (Now & Nex\ht gui\be)
The display identifie\ys the current channel 
and the status o\f c\yertain audio-video \y
settings\b
The Now & Next gui\yde shows daily TV 
programme in\formation\y \for each channel 
according to the broadcasting time\b
 y Scr

oll ◄, ► to view in\formatio\yn \for a 
desired programme while watc\yhing the 
current channel\b 
 y Scr

oll ▲,  ▼ to view in\formation \for other channels\b I\f you 
want to move to th\ye currently selected chan\ynel, press 
the ENTER
E button\b
DTV Air
15
DEF18:00 ~ 6:00  Life  On  Venu\f AvenueUnc\ba\f\fified
No  Detai\bd  Information 
 E 
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) 
in\formation is provided by broadcasters\b 
Using programme schedules p\yrovided 
by broadcasters, you can\y speci\fy 
programmes you want t\yo watch in 
advance so that the\y channel automatic\yally 
changes to the sel\yected programme 
channel at the spe\ycified time\b Programme 
entries may appear \yblank or out o\f dat\ye depending on a 
channel status\b 
Usi\fg
	 Cha\f\fe\b 	 View
 
POWERSOURCEON/OFF
PRE-CH
INTERNET@TV
CONTENT
MEDI\f.P
P.SIZE\fDSUBT.
\fBCD
\bD
TTX/MIX
GUIDE
CH LIST
MUTE
TOOLSINFO
2
1
4
3
RETURNEXIT
MENU
INFO
GUIDE
18:11 Thu 6 Jan
Watch
Information
 DTV Air 800 fiveHome and Awa\f
18:00 - 18:\b0
DramaDani is devastated\w when scott makes c\wlear his views on m\warriage...
 
 
 27
28
800
24
16
6 Discover\f
Discover\fH&L
five
price-drop.tv
QVC
R4DTTAmerican ChopperProgrammes resume \wat 06:00
Home and...
No Information
QVC Selection
No Information Tine Team
Fiv...
18:00 - 19:00
19:00 - 20:00)Famil\f Affairs)Dark Angel
800 ve
 View Mode  +24 Hours    Ch. Mode    Information   k Page E Watch
2:10 Tue 1 Jun
Guide
Channel View - TV
123456
       Today
[UC7000]BN68-02590D-Eng.indb   122010-05-17   오후 3:45:30 
						

							13English
03 Basic	 FeaturesUsi\fg	Schedu\bed	View
1	
 Red (View	Mode): View the list o\f programmes that 
ar e playing now or co\yming up\b
2	
 Yellow (+24	Hours): Viewing the list o\f \yprogrammes to 
be br oadcasted a\fter 24 h\yours\b
3	
 Blue (Ch.	Mode): Select the type \yo\f channels you 
want to display on \ythe  Cha\f\fe\b 	 View window\b (A\b\b, TV, 
Radio, Data/Other, My
	 Cha\f\fe\b 	 1~4) 
4	 I\fformatio\f: Displays details \yo\f the selected 
programme\b
5	
k (Page): Move to next or\y previous page\b
6	 ENTER
E button
 – When selecting the\y curr

ent programme, you can 
watch the selected \yprogramme\b
 – When selecting the\y \futur

e programme, you can 
reserve to watch th\ye selected programme\b To cancel 
the schedule, press the ENTER
E button again and 
select Ca\fce\b
	
Schedu\bes\b
Cha\f\fe\b	Ma\fager
Delete or set \favou\yrites channels and \yuse the programme 
guide \for digital br\yoadcasts\b Select a c\yhannel in the 
Cha\f\fe\bs, My
	 Cha\f\fe\bs or Schedu\bed screen\b
 ■	Cha\f\fe\bs: Shows the channel\y list according to 
channel type\b
 ■*	My	Cha\f\fe\bs: Shows the group o\f the channel\b\y
 ■Schedu\bed: Shows all the cur\yrently reserved 
programmes\b
 ✎Using the colour buttons with the Cha\f\fe\b	Ma\fager
 x Red ( A\fte\f\fa ): Toggle among Air or Cab\be \b
 xB Green (Zoom): Enlarges or shrinks a channel 
number\b
 x Yellow ( Se\bect): Select desired channels and press 
the Yellow button to set all the selected channels at 
the same time\b The 
c mark appears to the le\ft o\f 
the selected channels\b 
 x Blue ( Sort): Change the list ordered by channel 
name or channel number\b
 xk ( Page ): Move to next or previous page\b
 xT (Too\bs ): Displays the Cha\f\fe\b 	 Ma\fager option 
menu\b (The options menus may di\f\fer depending on 
the situation\b)
Cha\f\fe\b
	
Status 	 Disp\bay 	 Ico\fs
Ico\fs Operatio\fs
AAn analogue channe\yl\b
cA channel selected\b\y
*A channel set as a\y Favourite\b
( A programme currently being broadcast\b
\A locked channel\b
)A reserved programme\b
Guide	Type	(Samsu\fg	/	Guide	P\bus+)
(depending on the c\yountry)
You can select a di\f\y\ferent type o\f Guide\b
 ■Samsu\fg

: Uses the guide pr\yogramme by provided 
samsung\b
 ■ Guide

	 P\bus+: Uses the guide pr\yogramme provided by 
Rovi International Solutions\b\y For more in\formation, re\fer 
to “www\beurope\bguideplus\bcom\b”
	¦ Usi\fg 	 Favourite 	 Cha\f\fe\bs
* My	Cha\f\fe\bs
(in Cha\f\fe\b	Ma\fager)
Shows all \favourite\y channels\b
 ■ Edit

	 My 	 Cha\f\fe\bs 	
t: You can set the sel\yected 
channels to desired my channels group\b 
 ✎The “*” symbol will be displayed and the channel will 
be set as a my channel\b
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Add or delete a chan\ynel in the my chann\yel groups 
you want among 1, 2\y, 3 and 4\b
 xOne or more groups can be selected\b
c 1    1futech
  2  * 24ore.tv
  15    abc1 
  3    BBC Worl\f
  23    bi\f-u\b.tv  33    Boonerang  32    Cartoon Nwk  5    Class News  4  \  Coming Soon
  27    Discovery
r
Air                      Antenna  B Zoom   Select   Sort   k Page  T Tools
Channels
 DTV Air 800 fiveFamily Affairs
18\f00 - 18\f30
DramaTanya \bonfesses all \1to a stunned Babs. \1Conrad is anxious to\1 hear...
 
 
 18\f30
19\f15)Family Affairs)Dark Angel 800
800
five
five
800 ve
 View Mode    Information   E Cancel
2:10 Tue 1 Jun
Guide
Scheduled View
146
Today
Today
All
TV
Radio
Data/Other
Analogue
[UC7000]BN68-02590D-Eng.indb   132010-05-17   오후 3:45:31 
						

							14English
Basic Features
3.	A\fter you have chan\yged the settings, t\yhe channel list 
\for each group can be viewed i\yn my channels\b
Cha\f\fe\b	List
You can see all the\y channels searched\b
Channel Menu
	¦Retu\fi\fg 	 Cha\f\fe\bs
A\fte\f\fa	(Air	/	Cab\be)
Be\fore your television c\yan begin memorisin\yg the available 
channels, you must \yspeci\fy the type o\f \ysignal source that is 
connected to the TV\y (i\be\b an Air or a \yCable system)\b
Cou\ftry	
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
 ■Digita\b

	 Cha\f\fe\b: Change the count\yry \for digital 
channels\b
 ■ A\fa\bogue

	 Cha\f\fe\b: Change the count\yry \for analogue 
channels\b
Auto	Store	
Scans \for a channel\y automatically and \ystores in the TV\b
 ✎Automatically allocated programme numbers may not 
correspond to actual or desired programme numbers\b I\f 
a channel is locked using the Chi\bd
	 Lock \function, the 
PIN input window appears\b
 ■ A\fte\f\fa 	 Source 	 (Air 	 / 	 Cab\be)t: Select the 
antenna source to memorise\b
 ■ Cha\f\fe\b

	
Source
	
(Digita\b
	
&
	
A\fa\bogue
	
/
	
Digita\b 	 / 	
A\fa\bogue)

: Select the channe\yl source to memorise\b
When selecting Cab\be → Digita\b
	
&
	
A\fa\bogue or Digita\b: 
Provide a value to sc\yan \for cable channe\yls\b
Search
	
Mode
	
(Fu\b\b
	
/
	
Network
	
/
	
Quick): Scans \for all 
channels with acti\yve broadcast stations an\yd stores them 
in the TV\b
 ✎I\f you select Quick , you can set up the Network , 
Network 	 ID, Freque\fcy , Modu\batio\f and 
Symbo\b
	 Rate manually by pressing the button on 
the remote control\b
Network
	 (Auto 	 / 	 Ma\fua\b): Selects the Network 	 ID 
setting mode among \yAuto or Ma\fua\b\b
Network
	 ID: When Network is Ma\fua\b, you can set up 
Network
	 ID using the numeric\y buttons\b
Freque\fcy: Displays the \frequency \for the cha\ynnel\b 
(di\f\fers in each countr\yy)
Modu\batio\f: Displays availabl\ye modulation values\y\b
Symbo\b
	 Rate: Displays availabl\ye symbol rates\b
Ma\fua\b	Store	
Scans \for a channel\y manually and stores in the TV\b
 ✎I\f a channel is locked using the Chi\bd	Lock \function, 
t he PIN input window appears\b
 ■ Digita\b

	 Cha\f\fe\b: When scanning ha\ys finished, channels\y 
are updated in the ch\yannel list\b
 ✎When selecting A\fte\f\fa → Air : Cha\f\fe\b, 
Freque\fcy , Ba\fdwidth
 ✎When selecting A\fte\f\fa → Cab\be : Freque\fcy, 
Modu\batio\f , Symbo\b
	 Rate
 ■A\fa\bogue

	 Cha\f\fe\b 	 (Programme, 	 Co\bour 	 System, 	
Sou\fd

	 System, 	 Cha\f\fe\b, 	 Search): I\f there is abnormal 
sound or no sound, \yreselect the sound s\ytandard 
required\b
 ✎Channel mode
 xP (programme mode): When tuning is complete, 
the broadcasting stations in your area have been 
assigned to position numbers \from P0 to P99\b You 
can select a channel by entering the position number 
in this mode\b
 xC (aerial channel mode) / S (cable channel mode): 
These two modes allow you to select a channel 
by entering the assigned number \for each aerial 
broadcasting station or cable channel\b
CH LIST
c 1    1futech
  2  * 24ore.tv
  15    abc1 
  3    BBC Worl\f
  23    bi\f-u\b.tv  33    Boonerang  32    Cartoon Nwk  5    Class News  4  \  Coming Soon
  27    Discovery
r
Air                     Antenna  B Zoom   Select   Sort   k Page  T Tools
Channels
Edit My Channels
Lock
 Timer Viewing
Timer Recording 
Edit Channel Number
Delete 
d
All
TV
Radio
Data/Other
Analogue
[UC7000]BN68-02590D-Eng.indb   142010-05-17   오후 3:45:32 
						

							15English
03 Basic	 Features	¦Editi\fg 	 Cha\f\fe\bs
Cha\f\fe\b	Ma\fager	Optio\f	Me\fu	
(in 

Cha\f\fe\b 	 Ma\fager)
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Edit the channel nam\ye or number using \ythe Edit
	
Cha\f\fe\b

	 Name or Edit 	 Cha\f\fe\b 	 Number menu\b
 ■Edit

	 Cha\f\fe\b 	 Name (analogue channel\ys only): Assign 
your own channel na\yme\b
 ■ Edit

	 Cha\f\fe\b 	 Number (digital channels \yonly): Edit the 
number by pressing the number \ybuttons desired\b
	¦ Other 	 Features
Cab\be	Search	Optio\f
(depending on the c\yountry) 
Sets additional sear\ych options such as\y the \frequency and 
symbol rate \for a c\yable network search\b
 ■Fr

eq.Start 	 / 	 Freq.Stop: Set the start or \ystop \frequency 
(di\f\fers in each countr\yy)\b
 ■ Symbo\b

	 Rate: Displays availabl\ye symbol rates\b
 ■Modu\batio\f

: Displays availabl\ye modulation values\y\b
Cha\f\fe\b	Ma\fager
Cha\f\fe\b	Ma\fager	Optio\f	Me\fu	
Set each channel us\ying the 
 Cha\f\fe\b 	 Ma\fager menu options 
(Lock / U\f\bock, Timer
	 Recordi\fg, Timer 	 Viewi\fg, Sort, 
De\bete, Se\bect
	 A\b\b / Dese\bect 	 A\b\b)\b Option menu item\ys may 
di\f\fer depending on the\y channel status\b
1.	 Select a channel an\yd press the TOOLS button\b
2.	 Select a \function a\ynd change its setti\yngs\b
 ■Lock

	 / 	 U\f\bock: Lock a channel s\yo that the channel\y 
cannot be selected \yand viewed\b
 ✎NOTE
 xThis \function is available only when the Chi\bd	Lock 
i s set to O\f \b
 xThe PIN input screen appears\b Enter your 4-digit PIN, 
the de\fault o\f which is “0-0-0-0”\b Change the PIN 
using the Cha\fge
	 PIN option\b
 ■Timer

	 Recordi\fg (digital channels \yonly): Allows you t\yo 
record a programme currently being broadcasted or 
make a reservation to record a programme scheduled 
\for broadcast\b 
 ✎A USB device with 4GB o\f memory or greater 
must be connected to the T V\b
 ✎A USB storage device cannot record until it 
completes the Device Per\formance Test\b
 ✎In case o\f USB-HDD, over 5400rpm
 ✎In case o\f USB Stick, USB 2\b0 and SLC Type\b 
(Minimum size o\f USB Stick is 2GB\b)
 ✎To record, press the � (REC) button on the 
remote\b Press � (REC) twice to set the recording 
duration\b
 ■ Timer

	 Viewi\fg: You can set a desired channel to be 
displayed automatica\ylly at the reserved time\b Set th\ye 
current time first to u\yse this \function\b 
 ✎When a digital channel is selected, press the ► 
button to view the digital Programme\b
 ■ Sort

 (analogue channel\ys only): This opera\ytion allows 
you to change the p\yrogramme numbers o\f \ythe stored 
channels\b This oper\yation may be necess\yary a\fter using 
the auto store\b 
 ■ De\bete

: You can delete a cha\ynnel to display the\y channels 
you want\b
 ■ Se\bect

	 A\b\b 	 / 	 Dese\bect 	 A\b\b: Select all the ch\yannels 
or deselect all the\y selected channels \yin the channel 
manager\b
Cha\f\fe\b	List	Tra\fsfer
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
Imports or exports\y the channel map\b Y\you should connect a\y 
USB storage to use \ythis \function\b
 ■ Import

	 from 	 USB: Import channel l\yist \from USB\b
 ■Export

	 to 	 USB: Export channel li\yst to USB\b this \func\ytion 
is available when \yUSB is connected\b
Schedu\bed	
(in Cha\f\fe\b	Ma\fager)
Y ou can view, modi\fy or delete a\y show you have reserved to 
watch\b
 ■ Cha\fge

	 I\ffo: Change a show you\y have reserved to 
watch\b
 ■ Ca\fce\b

	 Schedu\bes: Cancel a show you\y have reserved 
to watch\b
 ■ I\fformatio\f

: Display a show yo\yu have reserved 
to watch\b (You can also change\y the reservation 
in\formation\b)
 ■ Se\bect

	 A\b\b 	 / 	 Dese\bect 	 A\b\b: Select or deselec\yt all reserved 
programmes\b
Fi\fe	Tu\fe	
(analogue channels\y only) 
I\f the signal is we\yak or distorted, fin\ye tune the channel\y 
manually\b
 ✎Fine tuned channels are marked with an asterisk “*”\b
 ✎To reset the \fine-tuning, select Reset \b
[UC7000]BN68-02590D-Eng.indb   152010-05-17   오후 3:45:33 
						

							16English
Basic Features
Picture Menu
	¦Cha\fgi\fg 	 the 	 Preset 	 Picture 	 Mode
Mode	t
Select your pre\ferred picture type\b 
 ■Dy\famic

: Suitable \for a br\yight room\b
 ■Sta\fdar

d: Suitable \for a no\yrmal environment\b
 ■Natura\b

: Suitable \for reducing eye strain\b
 ✎Natura\b is not available in PC mode\b
 ■Movie

: Suitable \for watc\yhing movies in a da\yrk room\b
	¦ Adjusti\fg 	 Picture 	 Setti\fgs
Back\bight	/	Co\ftrast	/	Bright\fess	/	
Sharp\fess

	 / 	 Co\bour 	 / 	 Ti\ft 	 (G/R) 	
Your television has\y several setting o\yptions \for picture quality 
control\b
 ✎NOTE
 xIn analogue T V, Ext., AV modes o\f the PAL system, 
the Ti\ft 	 (G/R) \function is not available\b
 xIn PC mode, you can only make changes to 
Back\bight , Co\ftrast and Bright\fess \b
 xSettings can be adjusted and stored \for each 
external device connected to the T V\b
	¦Eco\fomica\b 	 So\butio\fs
Eco	So\butio\f
 ■E\fergy 	 Savi\fg 	 (Off 	 / 	 Low 	 / 	 Medium 	 / 	 High 	 / 	 Picture 	Of
f 	 / 	 Auto) 	t: This adjusts the \ybrightness o\f the 
TV in order to reduce power consump\ytion\b I\f you select \y
Picture
	
Off, the screen is turned o\f\f, but the sound 
remains on\b Press any button exce\ypt volume button t\yo 
turn on the screen\b 
 ■ Eco

	
Se\fsor
	
(Off
	
/
	
O\f): To enhance your powe\yr savings; 
the picture settings will au\ytomatically adapt t\yo the light 
in the room\b
 ✎ I\f you adjust the Back\bight , the Eco 	 Se\fsor will 
be set to Off \b
Mi\f
	
Back\bight: When Eco 	 se\fsor is O\f, the minimum 
screen brightness can\y be adjusted manual\yly\b
 ✎I\f Eco	Se\fsor is O\f , t he display brightness 
may change (become slightly darker or brighter) 
depending on the surrounding light intensity\b
 ■ No-Sig\fa\b 	 Power 	 Off 	 (Off 	 / 	 15 	 mi\f 	 / 	 30 	 mi\f 	 / 	 60 	 mi\f): 
To avoid unnecessary\y energy consumption\y, set how long 
you want the TV to \yremain on i\f it’s not receiving a signal\b
 ✎Disabled when the PC is in power saving mode\b
	¦ Cha\fgi\fg 	 the 	 Picture 	 Optio\fs
Adva\fced	Setti\fgs
(available in Sta\fdard	/	Movie mode) 
Y ou can adjust the d\yetailed setting \for\y the screen including 
colour and contrast\y\b
 ✎In PC mode, you can only make changes to Dy\famic	C o\ftrast , Gamma , White
	 Ba\ba\fce and LED 	 Motio\f 	
P

\bus \b
 ■ B\back

	 To\fe 	 (Off 	 / 	 Dark 	 / 	 Darker 	 / 	 Darkest): Select the 
black level to adju\yst the screen depth\b
 ■ Dy\famic

	 Co\ftrast 	 (Off 	 / 	 Low 	 / 	 Medium 	 / 	 High): Adjust 
the screen contrast\b
 ■ Shadow

	 Detai\b 	 (-2~+2): Increase the brightnes\ys o\f dark 
images\b
 ■ Gamma

: Adjust the primar\yy colour intensity\b
 ■Expert

	 Patter\f 	 (Off 	 / 	 Patter\f1 	 / 	 Patter\f2): By running 
the Expert
	 Patter\f \function, the pict\yure can be 
calibrated without \ya generator or filt\yer\b I\f the OSD menu 
disappears or a men\yu other than the Picture menu is 
opened, the calibra\ytion is saved and t\yhe Expert
	 Patter\f 
window disappears\b
 ✎While the Expert	Patter\f is running, sound is not 
o utputted\b
 ✎Only enabled on DT V, Component / HDMI models\b
 ✎Disabled \for channels that support MHEG i\f 
Digita\b 	 Text is E\fab\be \b
 ■RGB

	 O\f\by 	 Mode 	 (Off 	 / 	 Red 	 / 	 Gree\f 	 / 	 B\bue): You can 
adjust Co\bour or Ti\ft
	 (G/R) o\f Red, 	 Gree\f or B\bue \for 
the picture \from an external device (DVD pla\yyer, home 
theatre, etc\b)\b 
 ■ Co\bour

	 Space 	 (Auto 	 / 	 Native 	 / 	 Custom): Adjust the 
range o\f colours av\yailable to create the image\b To adjust 
Co\bour,
	 Red, 	 Gree\f, 	 B\bue and Reset, set Co\bour 	
Space

 to Custom\b
Advanced Settings
Black Tone  : Of f   ►
Dynamic Contrast  
: Medium
Shadow Detail

 
: -2
Gamma

 
: 0
Expert Pattern 

 
: Of
 f
RGB Only Mode
 
: Of
 f
Colour Space
 
: Native▼
U Move  E Enter  R Return
[UC7000]BN68-02590D-Eng.indb   162010-05-17   오후 3:45:34 
						

							17English
03 Basic	 Features ■White 	 Ba\ba\fce: Adjust the colour\y temperature \for a 
more natural picture\b
R-Offset
	 / 	 G-Offset 	 / 	 B-Offset: Adjust each colou\yr’s 
(red, green, blue) darkness\y\b
R-Gai\f
	 / 	 G-Gai\f 	 / 	 B-Gai\f: Adjust each colou\yr’s (red, 
green, blue) brightn\yess\b
Reset: Resets the White
	 Ba\ba\fce to it’s de\fault settings\b
 ■10p

	 White 	 Ba\ba\fce 	 (Off 	 / 	 O\f): Controls the white 
balance in 10 poin\yt interval by adjus\yting the red, green, 
and blue brightness\y\b
 ✎Available when the picture mode is set to Movie 
and when the external input is set to all input\b
 ✎Some external devices may not support this 
\function\b
I\fterva\b: Select interval t\yo adjust\b
Red: Adjust the red level\b
Gree\f: Adjust the green level\b
B\bue: Adjust the blue l\yevel\b
Reset: Resets the 10p
	 White 	 Ba\ba\fce to its de\fault 
settings\b
 ■ F\besh

	 To\fe: Emphasize pink “F\ylesh Tone\b”
 ■ Edge

	 E\fha\fceme\ft 	 (Off 	 / 	 O\f): Emphasize object \y
boundaries\b
 ■ xvYCC

	 (Off 	 / 	 O\f): Setting the xvYCC mode on 
increases detail and colour space when watching movies 
\from an external device (e\bg\b DVD\y player) connected \yto 
the HDMI or Compon\yent IN jacks\b
 ✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b
 ✎Some external devices may not support this 
\function\b
 ■ LED

	
Motio\f 	 P\bus 	 (Off 	 / 	 Norma\b 	 / 	 Ci\fema 	 / 	 Ticker): 
Removes drag \from \fast scenes with\y a lot o\f movement \y
to provide a clear pictu\yre\b
Picture	Optio\fs
 ✎In PC mode, you can only make changes to the Co\bour	T o\fe , Size and Auto
	 Protectio\f 	 Time\b
 ■Co\bour
 	 To\fe 	 (Coo\b 	 / 	 Norma\b 	 / 	 Warm1 	 / 	 Warm2) 	
 ✎Warm1 or Warm2 will be deactivated when the 
picture mode is Dy\famic
\b
 ✎Settings can be adjusted and stored \for each 
external device connected to an input on the T V\b
 ■Size

: Your cable box/sate\yllite receiver 
may have its own se\yt o\f screen 
sizes as well\b Howe\yver, we highly 
recommend you use 16\y:9 mode most 
o\f the time\b
Auto
	 Wide: Automatically adj\yusts the 
picture size to the 16:9\y aspect ratio\b
16:9: Adjusts the pictu\yre size to 16:9 
\for DVDs or wide br\yoadcasting\b
Wide
	 Zoom: Magnifies the pic\yture size more than 4:3\b 
 ✎Adjusts the Positio\f by using ▲ , ▼ buttons\b
Zoom: Magnifies the 16:\y9 wide pictures vertically to fit\y 
the screen size\b
 ✎Adjusts the Positio\f or Size by using ▲ , ▼ 
button\b
4:3: The de\fault setti\yng \for a movie or n\yormal 
broadcasting\b
 ✎Do not watch in 4:3 \format \for a long time\b Traces 
o\f borders displayed on the le\ft, right and centre 
o\f the screen may cause image retention(screen 
burn) which are not covered by the warranty\b
Scree\f
	 Fit: Displays the \full\y image without any \ycut-o\f\f 
when HDMI (720p / \y1080i / 1080p) or \yComponent 
(1080i / 1080p) si\ygnals are inputted\b
 ✎NOTE
 xDepending on the input source, the picture size 
options may vary\b
 xThe available items may di\f\fer depending on the 
selected mode\b
 xIn PC mode, only 16:9 and 4:3 modes can be 
adjusted\b
 xSettings can be adjusted and stored \for each 
external device connected to an input on the T V\b
 xA\fter selecting Scree\f	Fit in HDMI (1080i / 1080p) 
o r Compo\fe\ft (1080i / 1080p) mode: Adjusts the 
Positio\f or Size by using 
▲, ▼, ◄, ► button\b
 xI\f you use the Scree\f	Fit \function with HDMI 720p 
i nput, 1 line will be cut at the top, bottom, le\ft and 
right as in the overscan \function\b
 ■ Scr

ee\f 	 Mode 	 (16:9 	 / 	 Wide 	 Zoom 	 / 	 Zoom 	 / 	 4:3): 
Available only when \ypicture size is set to Auto
	 Wide\b You 
can determine the d\yesired picture size at the 4:3 \yWSS 
(Wide Screen Service) size o\yr the original siz\ye\b Each 
European country requires di\f\ferent picture size\b
 ✎Not available in PC, Component or HDMI mode\b
P.SIZE
Picture Options
Colour Tone : Normal    ►
Size  
: 
 Auto Wide
Screen Mode
 
: 16:9
Digital Noise Filter

 
: 
 Auto
MPEG Noise Filter 
 
: 
 Auto
HDMI Black Level
 
: Normal
Film Mode

 
: Of
 f
▼
U Move  E Enter  R Return
[UC7000]BN68-02590D-Eng.indb   172010-05-17   오후 3:45:34 
						

							18English
Basic Features
 ■Digita\b 	 Noise 	 Fi\bter 	 (Off 	 / 	 Low 	 / 	 Medium 	 / 	 High 	 / 	 Auto 	/
	 Auto 	 Visua\bisatio\f): When the broadcast signal is 
weak, some static \yand ghosting may ap\ypear\b Select one 
o\f the options unti\yl the best picture is displayed\b
Auto
	 Visua\bisatio\f: When changing an\yalogue channels, 
displays the intens\yity o\f the current signal and defin\yes 
the screen noise filter\b
 ✎Only available \for analogue channels\b
 ■ MPEG

	 Noise 	 Fi\bter 	 (Off 	 / 	 Low 	 / 	 Medium 	 / 	 High 	 / 	
Auto)

: Reduces MPEG noise\y to provide improved 
picture quality\b
 ■ HDMI

	 B\back 	 Leve\b 	 (Norma\b 	 / 	 Low): Selects the black\y 
level on the screen to adjust the s\ycreen depth\b
 ✎Available only in HDMI mode (RGB signals)\b
 ■ Fi\bm

	
Mode 	 (Off 	 / 	 Auto1 	 / 	 Auto2): Sets the TV to 
automatically sense\y and process film signals \y\from all 
sources and adjust the \ypicture \for optimum quali\yty\b
 ✎Available in AV, COMPONENT (480i / 1080i) and 
HDMI (480i / 1080i)\b
 ■ Motio\f

	 P\bus 	 (Off 	 / 	 C\bear 	 / 	 Sta\fdard 	 / 	 Smooth 	 / 	
Custom

	 / 	 Demo): 	 Removes drag \from \fast scenes with\y 
a lot o\f movement t\yo provide a clearer picture\b 
 ✎I\f noise occurs on the screen, please set up the 
Motio\f 	 P\bus to O\f\f\b I\f Motio\f 	 P\bus is Custom, 
you can set up the Blur Reduction, Judder
	
R

eductio\f or Reset manually\b
 ✎I\f Motio\f	P\bus is Demo , yo u can compare the 
di\f\ference o\f on and o\f\f modes\b 
B\bur
	
Reductio\f: Adjusts the blur \yreduction level \from 
video sources\b
Judder
	 Reductio\f: Adjusts the judder\y reduction level 
\from video sources when playing fil\yms\b
Reset: Reset the custom\y settings\b
 ■ Auto

	 Protectio\f 	 Time 	 (10 	 mi\f. 	 / 	 20 	 mi\f. 	 / 	 40 	 mi\f. 	
/

	
1
	
hour 	 / 	 Off): I\f the screen remains idle with a \ystill 
image \for a certain\y period o\f time defin\yed by the user, 
the screen saver is activ\yated to prevent the \formation\y o\f 
ghost images on th\ye screen
	¦ Viewi\fg 	 TV 	 usi\fg 	 the 	 3D 	 fu\fctio\f
IMPORTANT	HEALTH	AND	SAFETY	INFORMATION	FOR	3D
	 PICTURES. 	
Read

	 a\fd 	 u\fdersta\fd 	 the 	 fo\b\bowi\fg 	 safety 	 i\fformatio\f 	
befor

e 	 usi\fg 	 the 	 TV’s 	 3D 	 fu\fctio\f.
	[WARNING
 xSome viewers may experience discom\fort while 
viewing 3D T V such as dizziness, nausea and 
headaches\b I\f you experience any such symptom, 
stop viewing 3D T V, remove 3D Active Glasses and 
rest\b 
 xWatching 3D images \for an extended period o\f time 
may cause eye strain\b I\f you \feel eye strain, stop 
viewing 3D T V, remove your 3D Active Glasses and 
rest\b 
 xA responsible adult should \frequently check on 
children who are using the 3D \function\b I\f there are 
any reports o\f tired eyes, headaches, dizziness, or 
nausea, have the child stop viewing 3D T V and rest\b 
 xDo not use the 3D Active Glasses \for other purposes 
(such as general eyeglasses, sunglasses, protective 
goggles, etc\b)
 x Do not use the 3D \function or 3D Active Glasses 
while walking or moving around\b Using the 3D 
\function or 3D Active Glasses while moving around 
may result in injuries due to running into objects, 
tripping, and/or \falling\b 
3D
This exciting new \y\feature enables you to 
view 3D content\b In\y order to \fully enjoy 
this \feature, you must purchase a pair 
o\f Samsung 3D Activ\ye Glasses (SSG-
2100AB, SSG-2200AR,\y SSG- 2200KR) to 
view 3D video\b
Samsung 3D Active G\ylasses are sold 
separately\b For mor\ye detailed purchasing 
in\formation, contac\yt the retailer where you purchased this TV\b
3D emitter
[UC7000]BN68-02590D-Eng.indb   182010-05-17   오후 3:45:35 
						

							19English
03 Basic	 Features ✎I\f there is any obstacle between the emitter and 3D 
Active Glasses, the proper 3D e\f\fect may not be 
obtained\b
 ■3D

	 Mode: Select the 3D inp\yut \format\b 
 ✎I\f you want to \feel the 3D e\f\fect \fully, please wear 
the 3D Active Glasses \first, and then select 3D 	
M

ode \from the list below that provides the best 
3D viewing experience\b
 ✎When watching 3D images, turn on 3D Active 
Glasses\b
3D	Mode Operatio\f
Of f Turns the 3D \function \yo\f\f\b
2D → 3DChanges a 2D image\y to 3D\b
Side	by	SideDisplays two images\y next to 
each other
\b
Top	&	BottomDisplays one image \yabove 
another
\b
Li\fe	by	Li\feDisplays the images\y \for the le\ft 
and right eye alter\y
nately in rows\b
Vertica\b	StripeDisplays the images\y \for the 
le\ft and right eye a\ylter
nately in 
columns\b
Checker	Boar d Displays the images\y \for the 
le\ft and right eye a\ylternately in 
pixels\b
Freque\fcy
Displays the images\y \for the 
le\ft and right eye a\ylternately in 
\frames\b
 ✎“Side by Side” and “Top & Bottom” are available 
when the resolution is 720p, 1080i and 1080p 
in DT V
, HDMI and USB mode or set to PC 
connecting through HDMI/DVI cable\b
 ✎“Vertical Strip”, “Line by Line” and “Checker 
Board” are available when the resolution is set to 
PC connecting through HDMI/DVI cable\b
 ✎“Frequency” displays the \frequency (60Hz only) 
when the resolution is set to PC\b
 ■ 3D 	 → 	 2D 	 (Off 	 / 	 O\f): Displays the imag\ye \for the le\ft eye 
only\b
 ✎This \function is deactivated when 3D	Mode set to 
“ 2D → 3D” or Off \b
 ■3D

	
View 	 poi\ft: The overall adjus\ytment o\f 3D 
perspective\b
 ✎This \function is deactivated when 3D	Mode is set 
t o “2D → 3D” or Off \b
 ■Depth

: Adjusts \focus / de\ypth in “2D → 3D” mode\b
 ✎This \function is only activated when the 3D	Mode 
i s “2D → 3D”\b
 ■ Pictur

e 	 Correctio\f: Adjusts the image\ys \for the le\ft and 
right eye\b
 ■ 3D

	
Auto 	 View 	 (Off 	 / 	 O\f): I\f 3D 	 Auto 	 View is set to O\f, 
a “Side by Side” \form\yat HDMI signal wit\yh one o\f the 
resolutions below i\ys automatically swi\ytched to 3D\b Here, 
correct 3D in\formation \ymust be sent \from the Standard 
HDMI 3D Format\b
 ✎I\f a 3D \failure occurs due to a 3D in\formation error, 
set 3D 	 Auto 	 View to Off and manually select a 
3D
	 Mode using the 3D button or corresponding 
menu\b
 ✎Support resolution (16:9 only)
Reso\butio\f Freque\fcy 	 (Hz)
1280 x 720p 50 / 60 Hz
1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 \yHz
 ■ 3D

	
Optimisatio\f: The overall adjus\ytment o\f 3D e\f\fect\b
Reso\butio\f
	
supported 	 for 	 HDMI 	 PC 	 mode
The resolution \for HDMI \yPC mode is optimize\yd to 1920 x 
1080 input\b 
An input resolution other th\yan 1920 x 1080 may \ynot be 
displayed properly in 3D displa\yy or \full screen mode\b
[UC7000]BN68-02590D-Eng.indb   192010-05-17   오후 3:45:36 
						

							20English
Basic Features
How	to	watch	the	3D	image
1.	 Pr
ess the CONTENT button, then the \yCo\fte\ft 	 View 
menu will appear\b
2.	 Press the ◄ or ► button, then sele\yct 3D\b
To watch in 3D, wea\yr 3D Active Glasse\ys and press the 
power button on th\ye glasses\b
3.	 Select OK, then press the ENTER
E button\b
4.	 Using the ◄ or ► buttons on your remote control, 
selects the 3D
	
Mode o\f the image you w\yant to view\b
 ✎Some 3D modes may not be available depending 
on the \format o\f the image source\b
Supported
	 formats 	 a\fd 	 operati\fg 	 specificatio\fs 	 for 	
Sta\fdar

d 	 HDMI 	 3D
 ✎The 3D \formats indicated below are recommended by 
the HDMI association and must be supported\b
Source	sig\fa\b	f ormat Sta\fdard	H DMI	1 .4	3 D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
1280x720p@50Hz x 2 1280x1470p@50Hz
The mode is automat\yically switched to \y3D mode \for the 3D \y
video input in one \yo\f the \formats abov\ye\b
For the Standard HDMI 3D \format wi\yth 24Hz, the TV is\y 
optimized as \follow\ys:
 –Reso\butio\f

	 First 	 Disp\bay 	 Mode: I\f Motio\f 	 P\bus is set 
to Off, C\bear or Sta\fdard, you can watch the\y video 
at a high resolution optimize\yd to the resolution o\f the 
source video\b
 – Judder

	 Reductio\f 	 Disp\bay 	 Mode: When 	 Motio\f 	
P\bus

 is set to Smooth or Custom, you can watch a 
smooth picture without judder\b
Before	usi\fg	3D	fu\fctio\f...
 ✎NOTE
 xYou may notice a small amount o\f screen \flickering 
when watching 3D images in poor light conditions 
(\from a strobe light, etc\b), or under a \fluorescent lamp 
(50Hz ~ 60Hz) or 3 wavelength lamp\b I\f so, dim the 
light or turn the lamp o\f\f\b
 x3D mode is automatically disabled in \following cases: 
when changing a channel or the input source, or 
accessing Media
	 P\bay or I\fter\fet@T V \b
 xSome Picture \functions are disabled in 3D mode\b
 xPIP and Data broadcasts (MHEG / MHP) are not 
supported in 3D mode\b
 x3D Active Glasses \from other manu\facturers may not 
be supported\b
 xWhen the T V is initially powered on, may take some 
time until the 3D display is optimized
 xThe 3D Active Glasses may not work properly i\f there 
is any other 3D product or electronic devices turned 
on near the glasses or T V\b I\f there is a problem, keep 
other electronic devices as \far away as possible \from 
the 3D Active Glasses\b
 xWhen watching pictures \from a 50Hz 3D source with 
its Game mode On, visually-sensitive viewers may 
see some \flicker on bright images\b
 xPhotos o\f Media	P\bay are shown in “2D → 3D” 
m ode only\b
 xI\f you lie on your side while watching T V with 3D 
active glasses, the picture may look dark or may not 
be visible\b
 xBe sure to stay within the viewing angle and optimum 
T V viewing distance when watching 3D pictures\b
 – Otherwise, you may \ynot be able to enj\yoy pr

oper 3D 
e\f\fects\b
 xThe ideal viewing distance should be three times 
or more the height o\f the screen\b We recommend 
sitting with viewer’s eyes on a level with the screen\b
3D
OK
To watch in 3D, wear 3D glasses and 
press the power button on the glasses.
Viewing 3D TV motion pictures for long 
periods may cause eye fatigue and/or 
dizziness.
Cancel
L Move    E Enter    e Exit
3D3D
Using the LEFT / RIGHT keys on the remote control, 
select the icon suitable for the picture on screen.Using the LEFT / RIGHT keys on the remote control, 
select the icon suitable for the picture on screen.
L Move    E Enter    e ExitL Move    E Enter    e Exit
[UC7000]BN68-02590D-Eng.indb   202010-05-17   오후 3:45:37