Samsung UE 40D6530 User Manual

							◀▶
English
 
●MPEG Noise Filter ( Off / Low / Medium / High / Auto): Reduces MPEG noise 
to provide improved picture quality.
 
●HDMI Black Level (Low / Normal): Selects the black level on the screen to 
adjust the screen depth.
 
NAvailable only in HDMI mode (RGB signals).
 
●Film Mode (Off  / Auto1 / Auto2): Sets the TV to automatically sense and 
process film signals from all sources and adjust the picture for optimum quality.
 
NAvailable in AV, COMPONENT (480i / 1080i) and HDMI (1080i).
  
						

							◀◀▶
English
 
●Motion Plus (Off  / Clear / Standard / Smooth / Custom / Demo): Removes 
drag from fast scenes with a lot of movement to provide a clearer picture. 
 
NThe Info screen on your TV displays the resolution and frequency of the 
incoming signal (60Hz), but not the frequency the TV is generating for the 
image it is displaying by using Motion Plus function.
 
NIf noise occurs on the screen, please set up the Motion Plus to Off . If 
Motion Plus is Custom, you can set up the Blur Reduction, Judder 
Reduction or Reset manually.
 
NIf Motion Plus is Demo, you can compare the difference of on and off 
modes.
  
						

							◀▶
English
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video sources when 
playing films.
Reset: Reset the custom settings.
 
■
Reset Picture (Ye s  / No)
Resets your current picture mode to its default settings.
  
						

							◀◀▶
English
 
❑
Setting up the TV with Your PC
Set the input source to PC.
 
■
Auto Adjustment  t
 
OMENU
m 
→  Picture 
→ Auto Adjustment 
→ ENTER
E
Adjust frequency values/positions and fine tune the settings automatically. 
 
NNot available when connecting with an HDMI to DVI cable.
  
						

							◀▶
English
 
■
PC Screen Adjustment
 
OMENU
m 
→  Picture 
→ Screen Adjustment 
→ PC Screen Adjustment 
→ 
ENTER E
 
●Coarse / Fine: Removes or reduces picture noise. If the noise is not removed 
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) 
and Fine-tune again. After the noise has been reduced, readjust the picture so 
that it is aligned to the centre of screen.
 
●Position: Adjusts the PC screen position with direction button (
u / 
d  / 
l / 
r).
 
●Image Reset: Resets the image to the default settings.
  
						

							◀◀▶
English
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) 
Depending on the version of Windows and the video card, the actual screens on your 
PC may differ in which case the same basic set-up information will almost always b\
e 
applied. (If not, contact your computer manufacturer or Samsung Dealer.)1.  Click on “Control Panel” on the Windows start menu.
2.  Click on “Appearance and Themes” in the “Control Panel” window and a display 
dialog-box will appear.
3.  Click on “Display” and a display dialog box will appear.
4.  Navigate to the “Settings” tab on the display dialog-box.
 
●The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]
 
●If a vertical-frequency option exists on your display settings dialog box, the 
correct value is “60” or “60 Hz”. Otherwise, just click “OK”\
 and exit the dialog 
box.
  
						

							◀▶
English
 
❑
Changing the Preset Sound Mode
 
OMENU
m 
→  Sound 
→ Sound Mode 
→ ENTER
E
 
■
Sound Mode  t
 
●Standard: Selects the normal sound mode.
 
●Music: Emphasizes music over voices.
 
●Movie: Provides the best sound for movies.
 
●Clear Voice: Emphasizes voices over other sounds.
 
●Amplify: Increase the intensity of high-frequency sound to allow a better 
listening experience for the hearing impaired.
 
NIf Speaker Select is set to External Speaker, SRS TheaterSound is disabled. 
  
						

							◀◀▶
English
 
❑
Adjusting Sound Settings
 
OMENU
m 
→  Sound 
→ ENTER
E
 
■
Sound Effect
 
●SRS TruSurround HD (Off  / On) 
t
(standard sound mode only) 
This function provides a virtual 5.1 channel surround sound experience through 
a pair of speakers using HRTF (Head Related Transfer Function) technology.
 
●SRS TruDialog (Off  / On) 
(standard sound mode only) 
This function allows you to increase the intensity of a voice over background 
music or sound effects so that dialog can be heard more clearly.
  
						

							◀▶
English
 
●SRS CS Headphone: You can hear virtual 5.1ch surround sound over the 
headphones.
 
●Equalizer
Adjusts the sound mode (standard sound mode only). 
 
–Balance L/R: Adjusts the balance between the right and left speaker.
 
–100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts 
the level of specific bandwidth frequencies.
 
–Reset: Resets the equalizer to its default settings.
  
						

							◀◀▶
English
 
■
3D Audio (Off  / Low / Medium / High): 3D audio technology provides the 
immersive sound corresponding to the pop-up effect of 3D video by audio depth 
control in perspective.
 
NAvailable in only when watching 3D image.
 
■
Broadcast Audio Options
 
●Audio Language 
(digital channels only) 
Change the default value for audio languages. 
 
NThe available language may differ depending on the broadcast.