Samsung UE 40D6530 User Manual

							◀▶
English
 
●To turn off the media contents transmission from the mobile phone, set Media 
to Off  in the AllShare Settings.
 
●Contents may not be played on your TV depending on their resolution and 
format.
 
●The ENTER
E and 
l / 
r buttons may not work depending on the type of 
media content.
 
●Using the mobile device, you can control the media playing. For details, refer to 
each mobile’s user’s guide.
  
						

							◀▶
English
What is Anynet+? 
t
Anynet+ is a function that enables you to control all connected Samsung devices that 
support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used 
only with Samsung devices that have the Anynet+ feature. To be sure your Samsung 
device has this feature, check if there is an Anynet+ logo on it.
 
NNOTE
 
●You can only control Anynet+ devices using the TV remote control, not the 
buttons on the TV.
 
●The TV remote control may not work under certain conditions. If this occurs, 
reselect the Anynet+ device.
 
● The Anynet+ functions do not operate with other manufacturers’ products.
  
						

							◀▶
English
For the method of connecting external devices, refer to the supported user manual.
 
NNOTE
 
●Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack 
on your TV and the Digital Audio Input on the Home Theatre.
 
●When following the connection above, the Optical jack only outputs 2 cha\
nnel 
audio. You will only hear sound from the Home Theatre’s Front, Left and Right 
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect 
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. 
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
  
						

							◀▶
English
 
●You can connect only one Home Theatre.
 
●You can connect an Anynet+ device using the HDMI cable. Some HDMI cables \
may not support Anynet+ functions.
 
●Anynet+ works when the AV device supporting Anynet+ is in the standby or on 
status.
 
●Anynet+ supports up to 12 AV devices in total. Note that you can connect up 
to 3 devices of the same type.
 
●You can connect an Anynet+ device using the HDMI cable. Some HDMI cables \
may not support Anynet+ functions.
  
						

							◀▶
English
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+\
 devices 
connected to the TV.
Anynet+ MenuDescription
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for 
devices that support the recording function.)
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, 
the disc menu of the DVD recorder will appear.
(device_name) TOOLS Shows the tools menu of the connected device. E.g. If a DVD recorder is 
connected, the play menu of the DVD recorder will appear.
 
NDepending on the device, this menu may not be available.
  
						

							◀▶
English
Anynet+ MenuDescription
(device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD recorder is 
connected, the title menu of the DVD recorder will appear.
 
NDepending on the device, this menu may not be available.
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and 
if only one recording device is connected, it will be represented as (*device_name).
  
						

							◀▶
English
 
❑
Setting Up Anynet+
 
OMENU
m 
→  System 
→ Anynet+ (HDMI-CEC) 
→ ENTER
E
 
■
Anynet+ (HDMI-CEC) (Off  / On) 
t
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
 
NWhen the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related 
operations are deactivated.
  
						

							◀▶
English
 
■
Auto Turn Off (No / Ye s )
Setting an Anynet+ Device to turn off automatically when the TV is turned off.
 
NIf Auto Turn Off is set to Ye s , running external devices will turn off at the same 
time as the TV powers off. However, a device may not turn off if recording is in 
progress.
 
NMay not be enabled depending on the device.
  
						

							◀▶
English
 
❑
Switching between Anynet+ Devices
1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the 
ENTER
E button to select Device List.
 
NIf you cannot find a device you want, select Refresh to refresh the list.
2.  Select a device and press the ENTER
E button. You can switch to the 
selected device.
 
NThe Device List menu will only appear when you set Anynet+ (HDMI-CEC) 
to On in the System menu.
  
						

							◀▶
English
 
●Switching to the selected device may take up to 2 minutes. You cannot 
cancel the operation during the switching operation.
 
●If you have selected external input mode by pressing the SOURCE button, 
you cannot use the Anynet+ function. Make sure to switch to an Anynet+ 
device by using the Device List.