Samsung UE 37D6530 User Manual

							◀▶
English
How to set up manually
To set up your TV’s wireless network connection 
manually, follow these steps:1.  Follow Steps 1 through 7 in the “How to set  up automatically” procedure.
2.  Select the IP Settings on network test  screen.
3. Set  IP Mode to Manual.
4.  Press the  d button on your remote to go to 
the first entry field.
IP Settings
IP Mode    Manual
DNS Mode  Manual
DNS Server    0 . 0 . 0 . 0
IP Address   
0 . 0 . 0 . 0
Subnet Mask    0 . 0 . 0 . 0
Gateway    0 . 0 . 0 . 0
OK
 
						

							◀▶
English
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use 
the number buttons on your remote to enter numbers and the arrow buttons to 
move from one entry field to another.
6.  When done, select the OK.
7.  The network connection screen appears, and network setting is done.
  
						

							◀▶
English
 
■
Network Setup (WPS(PBC))
How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps:1.  Go to Network Setting screen. To enter it, 
follow the directions of Network Setting.
2.  Select the WPS(PBC).
3.  Press the WPS(PBC) button on your router 
within 2 minutes. Your TV automatically 
acquires all the network setting values it 
needs and connects to your network.
4.  The network test screen appears, and network setting is done.
Network Setting
Select a network connection type.
Wired
Previous
Next
CancelWireless(general)
WPS(PBC)
One Foot Connection
Connect to the access point 
easily by pressing the WPS(PBC) 
button. Choose this if your access 
point supports push button 
configuration(PBC).
 
● The displayed image may differ depending on the 
model.
  
						

							◀▶
English
 
■
Ad Hoc Network Setup
You can connect to a mobile device supporting Ad-hoc connections without \
a 
wireless router or AP through the TV. When connected to a mobile device, you can 
use files on the device or connect to the Internet using the AllShare or Multimedia 
function.
How to set up using Ad hoc 1.  Go to Network Settings screen.  
(MENU
m 
→  Network 
→ Network Settings 
→ ENTER
E).
2. Select  Wireless (General), and press ENTER
E, then press ENTER
E again.
  
						

							◀▶
English
3. Select Ad hoc. The message “Ad hoc service supports a direct connection 
with Wi-Fi compatible devices like a cell phone or PC. Other network 
services may be limited. Do you want to change the network connection?” 
is displayed.
4. Select  OK, and press ENTER
E. The TV searches for the mobile device.
5.  When the TV finishes searching for your mobile device, input the generated 
Network Name (SSID) and Security Key into the device you want to connect 
and then connect to the network.
 
NIf network does not operate normally, check the Network Name (SSID) and 
Security key again. An incorrect Security key may cause a malfunction.
 
NIf a device is connected once, it is displayed in the Network Setting li\
st. 
When you connect to it again, you can find it in the List.
  
						

							◀▶
English
 
■
Network Setting (One Foot Connection)
The One Foot Connection make you easy to connect samsung TV and samsung 
wireless router by placing samsung wireless router within 1 foot(25cm) from 
samsung TV. If your wireless router does not support One Foot Connection, you 
must connect using one of the other methods.
 
NYou can check for equipment that supports One Foot Connection on. www.
samsung.com
  
						

							◀▶
English
How to set up using One Foot Connection
Turn on the power of wireless router and TV.
1.  Go to Network Setting screen. To enter it, 
follow the directions of Network Setting.
2.  Select the One Foot Connection.
3.  Place the wireless router in parallel with the 
Samsung Wireless LAN adapter giving a gap 
no larger than 25cm.
Network Setting
Select a network connection type.
Wired
Previous
Next
CancelWireless(general)
WPS(PBC)
One Foot Connection
Connect to the wireless network 
automatically if your access point 
supports One Foot Connection. 
Select this connection type after 
placing the access point within 10 
inches (25 cm) of your TV.
 
● The displayed image may differ depending on the 
model.
  
						

							◀▶
English
 
NIf One Foot Connection does not connect your TV to your Router, a pop-up 
window appears on the screen notifying you of the failure. If you want to try 
using One Foot Connection again, reset the wireless router, disconnect the 
Samsung Wireless LAN adapter and then try again from Step 1. You can also 
choose one of the other connection setup methods.
4.  The network connection screen appears, and network setting is done.
5.  Place the wireless router in a desired location.
 
NIf the wireless router settings change or you install a new wireless router, you 
must perform the  One Foot Connection  procedure again, beginning from Step 
1.
  
						

							◀▶
English
 
■
Network Setting (Plug & Access)
Plug & Access function make you easy to connect samsung TV and samsung 
wireless router by using USB memory stick. If your wireless router does not 
support Plug & Access, you must connect using one of the other methods.
 
NYou can check for equipment that supports Plug&Access on www.samsung.
com.
  
						

							◀▶
English
How to set up using Plug & Access function
Turn on the power of wireless router and TV.1.  Insert USB memory stick into our Samsung wireless router and checking 
wireless router’s LED status (Blinking 
→ On).
2.  Then take USB memory out and insert it into Samsung TV.
3.  Wait until the connection is automatically established.
 
NIf Plug & Access does not connect your TV to your wireless router a pop-
up window appears on the screen notifying you of the failure. If you want 
to try using Plug & Access again, reset the wireless router disconnect the 
Samsung Wireless LAN adapter and then try again from Step 1. You can 
also choose one of the other connection setup methods.