Samsung UE 37D6530 User Manual

							◀▶
English
 
●If you have a Dynamic Network, you should use an ADSL modem or router 
that supports Dynamic Host Configuration Protocol (DHCP). Modems and 
routers that support DHCP automatically provide the IP address, subnet mask, 
gateway, and DNS values your TV needs to access the Internet so you do not 
have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static 
IP address, you must enter the IP address, subnet mask, gateway, and DNS 
values manually on your TV’s Cable Setup Screen when you set up the network 
connection. To get the IP address, subnet mask, gateway, and DNS values, 
contact your Internet Service Provider (ISP). If you have a Windows computer, 
you can also get these values through your computer.
 
NYou can use ADSL modems that support DHCP if your network requires a 
Static IP address. ADSL modems that support DHCP also let you use Static 
IP addresses.
  
						

							◀▶
English
 
■
Network Settings
 
OMENU
m 
→  Network 
→ Network Setting 
→ 
ENTER E
Set the network connection to use various Internet 
services such as SMART HUB, AllShare and perform 
software upgrade.
 
■
Network Status
 
OMENU
m 
→  Network 
→ Network Status 
→ ENTER
E
You can check the current network and Internet status.
 
■
AllShare Settings
 
OMENU
m 
→  Network 
→ Allshare Setting 
→ ENTER
E
Selects whether to use media functions on the network.
Network
Network Settings 
Allshare setting  Network Status 
 
● The displayed image may differ 
depending on the model.
  
						

							◀▶
English
 
■
Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network tha\
t 
supports DHCP. To set up your TV’s cable network connection automatically, 
follow these steps:
How to set up automatically 1.  Go to Network Settings screen. To enter it, 
follow the directions of Network Setting. 
2.  Select the Wired.
3.  The network test screen appears, and 
network setting is done.
Network Setting
Select a network connection type.
Wired
Previous
Next
CancelWireless(general)
WPS(PBC)
One Foot Connection
Connect to the network using 
a LAN cable. Please make sure 
that the LAN cable is connected.
  
						

							◀▶
English
 
NIf it fails to set automatically, check the 
connection of LAN port.
 
NIf you cannot find network connection 
values or if you want to set connection 
manually, set it to Manual in IP Settings. 
Refer to following “How to set up manually”.
Network Setting
Wired network and Internet connection completed.
Internet is connected successfully.
If you have a problem with using Internet Service, contact your Internet service 
provider. MAC Address 
00:12:fb:2b:56:4d
IP Address  192.168.11.4
Subnet Mask  255.255.255.0
Gareway 192.168.11.1
DNS Server  192.168.11.1Retry
IP Setting OK
SEC_LinkShare
  
						

							◀▶
English
 
■
Network Setting (Manual)
Use the Manual Network Setup when connecting your TV to a network that 
requires a Static IP address.
Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these 
steps:1.  Right click the Network icon on the bottom right of the screen.
2.  In the pop-up menu that appears, click Status.
3.  On the dialog that appears, click the Support tab.
4.  On the Support Tab, click the Details button. The Network connection values 
are displayed.
  
						

							◀▶
English
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1.  Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2.  Select the IP Settings on network test screen.
3. Set  IP Mode to Manual.
4.  Press the  d button on your remote to go to the 
IP Address.
IP Settings
IP Mode   Manual
DNS Mode  Manual
DNS Server    0 . 0 . 0 . 0
IP Address   
0 . 0 . 0 . 0
Subnet Mask    0 . 0 . 0 . 0
Gateway    0 . 0 . 0 . 0
OK
 
						

							◀▶
English
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the 
number buttons on your remote to enter numbers and the arrow buttons to move 
from one entry field to another.
6.  When done, select the OK.
7.  The network test screen appears, and network setting is done.
  
						

							◀▶
English
 
■
Connecting to a Wireless Network  for LED 6300 series and under 
To connect your TV to your network wireless, you need a wireless router or 
modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, 
WIS10ABGN-sold separately) , which you connect to your TV’s back or side panel 
USB port. See the illustration below.
The LAN Port  
on the Wall
LAN CableWireless IP sharer  
(router having DHCP server) TV Rear Panel
Samsung 
Wireless LAN  adapter
  
						

							◀▶
English
Samsung’s Wireless LAN adapter is sold separately and is offered by selected 
retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN 
adapter supports the IEEE 802.11a/b/g and n communication protocols. 
Samsung recommends using IEEE 802.11n. When you play video over a network 
connection, the video may not be played smoothly.
 
NNOTE
 
●You must use the “Samsung Wireless LAN adapter (WIS09ABGN, 
WIS09ABGN2, WIS10ABGN) to use a wireless network.
 
●Samsung Wireless LAN adapter and The USB extension Cable are sold 
separately and are offered by select retailers, Ecommerce sites and 
Samsungparts.com.
  
						

							◀▶
English
 
●To use a wireless network, your TV must be connected to a wireless IP sharer 
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV 
can use a DHCP or static IP address to connect to the wireless network.
 
●Select a channel for the wireless IP sharer that is not currently being used. If the 
channel set for the wireless IP sharer is currently being used by another device 
nearby, this will result in interference and communication failure.
 
●If you apply a security system other than the systems listed below, it will not 
work with the TV.