Samsung UE 37D6500 User Manual

							◀▶
English
 
●If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at 
the top, bottom, left and right as in the overscan function.
Input Source Picture Size
ATV, EXT
AV, Component (480i, 480p, 576i, 576p) Auto Wide, 16:9, Wide Zoom, Zoom, 4:3
DTV (720p, 1080i, 1080p)
Component (720p ,1080i, 1080p) HDMI (720p, 1080i, 1080p)
Auto Wide, 16:9, Wide Zoom, Zoom, 4:3,  Screen Fit  for DTV 
 
HDMI (720p, 1080i, 1080p) Smart View 1
DTV (1080i), HDMI (720p, 1080i, 1080p) Smart View 2
PC 16:9, 4:3
  
						

							◀◀▶
English
 
●4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture 
size is set to Auto Wide. You can determine the desired picture size at the 4:3 
WSS (Wide Screen Service) size or the original size. Each European country 
requires different picture size.
 
NNot available in PC, Component or HDMI mode.
  
						

							◀▶
English
 
❑
Changing the Picture Options
 
■
Advanced Settings
 
OMENU
m 
→  Picture 
→ Advanced Settings 
→ 
ENTER E
 
NAdvanced Settings are available in Standard / 
Movie mode.
You can adjust the detailed setting for the screen 
including colour and contrast.
 
NWhen connecting a PC, you can only make changes 
to Gamma and White Balance. 
●  The displayed image may differ 
depending on the model.
Advanced Settings
Black Tone    Off
Dynamic Contrast  Medium
Shadow Detail    -2
Gamma   0
RGB Only Mode   Off
Colour Space    Native
Expert Patten   
Off
  
						

							◀◀▶
English
 
●Black Tone (Off  / Dark / Darker / Darkest): Select the black level to adjust the 
screen depth.
 
●Dynamic Contrast (Off  / Low / Medium / High): Adjust the screen contrast.
 
●Shadow Detail (-2~+2): Increase the brightness of dark images.
 
●Gamma: Adjust the primary colour intensity.
 
●Expert Pattern (Off  / Pattern1 / Pattern2): By running the Expert Pattern 
function, the picture can be calibrated without a generator or filter. If the OSD 
menu disappears or a menu other than the Picture menu is opened, the 
calibration is saved and the Expert Pattern window disappears.
 
NWhile the Expert Pattern is running, sound is not outputted.
 
NOnly enabled on DTV, Component / HDMI models.
  
						

							◀▶
English
 
●RGB Only Mode (Off  / Red / Green / Blue): Displays the Red, Green and 
Blue colour for making fine adjustments to the hue and saturation.
 
●Colour Space (Auto / Native / Custom): Adjust the range of colours available 
to create the image.
 
NTo adjust Colour, Red, Green, Blue and Reset, set Colour Space to 
Custom.
 
●White Balance: Adjust the colour temperature for a more natural picture. 
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) 
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
  
						

							◀◀▶
English
 
●10p White Balance (Off  / On): Controls the white balance in 10 point interval 
by adjusting the red, green, and blue brightness.
 
NAvailable when the picture mode is set to Movie and when the external 
input is set to all input.
 
NSome external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
  
						

							◀▶
English
 
●Flesh Tone: Emphasize pink “Flesh Tone”.
 
●Edge Enhancement (Off  / On): Emphasize object boundaries.
 
●Motion Lighting (Off  / On): Reduce power consumption by brightness control.
 
NMotion Lighting is available in Standard / Movie mode.
 
NNot supported in 3D mode.
 
NWhen changing a setting value of Contrast, Motion Lighting will be set to 
Off .
  
						

							◀◀▶
English
 
●xvYCC (Off  / On): Setting the xvYCC mode on increases detail and colour 
space when watching movies from an external device (e.g. DVD player) 
connected to the HDMI or Component IN jacks.
 
NAvailable when the picture mode is set to Movie and when the external 
input is set to HDMI or Component.
 
NSome external devices may not support this function.
 
●LED Motion Plus (Off  / On): Removes drag from fast scenes with a lot of 
movement to provide a clear picture.
  
						

							◀▶
English
 
■
Picture Options
 
OMENU
m 
→  Picture 
→ Picture Options 
→ 
ENTER E
 
NWhen connecting a PC, you can only make changes 
to the Colour Tone.
 
●Colour Tone (Cool / Standard / Warm1 / Warm2) 
 
NWarm1 or Warm2 will be deactivated when the 
picture mode is Dynamic.
 
NSettings can be adjusted and stored for each 
external device connected to an input on the TV.
Picture Option
Colour Tone    Standard
Digital Noise Filter  Auto
MPEG Noise Filter  Auto
HDMI Black Level  Nomal
Motion Plus    Standard
Film Mode   
Off
 
● The displayed image may differ 
depending on the model.
  
						

							◀◀▶
English
 
●Digital Noise Filter (Off  / Low / Medium / High / Auto / Auto Visualisation): 
When the broadcast signal is weak, some static and ghosting may appear. 
Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity 
of the current signal and defines the screen noise filter.
 
NOnly available for analogue channels.